正癸烷燃烧详细反应机理的构建及简化

推进技术 ›› 2012, Vol. 33 ›› Issue (1): 64-68.

正癸烷燃烧详细反应机理的构建及简化

刘建文,熊生伟,马雪松,李萍,李象远

中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074;中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074;中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074;四川大学原子与分子物理研究所,四川成都 610065;四川大学化工学院,四川成都 610065

发布日期:2021-08-15
作者简介:刘建文(1981—),男,博士,工程师,研究领域为燃烧流场计算。E-mail:liujw512@163.com

Development and Reduction of N-Decane Detailed Combustion Reaction Mechanism

Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China;Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China;Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China;Institute of Atomic and Molecular Physics, Sichuan University, Chengdu 610065, China;College of Chemical Engineering, Sichuan University, Chengdu 610065, China

Published:2021-08-15

摘要/Abstract

摘要： 利用燃烧详细反应机理自动生成程序ReaxGen得到了正癸烷的388组分2226反应方程的详细燃烧机理,对此机理在不同压力和温度下的点火延迟时间进行了动力学分析,并与试验得到的点火延迟数据进行了对比,最后采用直接关系图法DRG得到了不同规模的骨架机理。计算发现:在温度大于1000K的情况下,给出的机理能比较好地模拟正癸烷的点火过程,预测到的点火延迟数据与试验符合较好,证明了反应机理自动生成程序在链烷烃部分是可信的；通过DRG分析得到的包含62组分422方程的骨架机理,其计算结果与详细机理吻合很好,而组分和反应方程分别减少了约84%和81%。此机理的计算时间有大幅的缩短,可用于进一步的CFD应用和机理简化。 

关键词: 正癸烷;燃烧机理;直接关系图法;点火延迟;骨架机理

Abstract: The n-decane combustion mechanism containing 388 species and 2226 reactions was developed based on the combustion mechanism automating generation program ReaxGen. The ignition delay time obtained under different pressure and temperature was compared with the experimental value. Finally, different skeletal mechanisms were generated through Direct Relation Graph (DRG). It demonstrated that the detailed combustion mechanism of n-decane can well simulate the ignition process, and the ignition delay data agreed well with experimental results if temperature exceeded 1000K. It proved that the Reaxgen-Combustion program was credible for alkane Hydrocarbon. The 62-species 422-reactions skeletal mechanism generated by DRG gave good results with detailed mechanism, and the species and reaction number was decreased by 84% and 81%, respectively. The calculational time was reduced vastly, and the skeletal mechanism can be used for further CFD application and reduction. 

Key words: N-decane; Combustion mechanism; DRG; Ignition delay; Skeletal mechanism

刘建文,熊生伟,马雪松,李萍,李象远. 正癸烷燃烧详细反应机理的构建及简化[J]. 推进技术, 2012, 33(1): 64-68.

参考文献

[2] Honnet S, Seshadri K, Niemann U,et al.A Surrogate Fuel for Kerosene[J]. Proceedings of the Combustion Institute, 9,2 (1):485-492.
[3] Dagaut P,Bakali A E, Ristori A.The Combustion of Kerosene :Experimental Results and Kinetic Modeling Using 1-to 3-Components Surrogate Model[J].Fuels, 6,5 (7-8):944-956.
[4] Cathonnet M, Voisin D, Etsouli A, et al.Symposium Applied Vehicle Technology Panel on Gas Turbine Engine Combustion[C].France:RTO Metting Procedings,1999:1-9.
[5] Vajda S, Valko P, Turanyi T.Princpal Component Analysis of Kinetic Models[J].International Journal of Chemical Kinetics, 9,1(1):83-99.
[6] Turanyi T.Application of Sensitivity Analysis of Combustion Chemistry[J]. Reliability Engineering and System Safety, 7,7(1):41-48.
[7] Turanyi T.Sensitivity Analysis of Complex Kinetic Systems:Tools and Application[J].J.Math Chem,0,5(3):203-248.
[8] Lu T F, Law C K.On the Applicability of Directed Relation Graphs to the Reduction of Reaction Mechanisms[J].Combustion and Flame, 6,6(3):472-483.
[9] Lu T, Law C K, Chen J.Development of Non-Stiff Reduced Mechanisms for Direct Numerical Simulations[C].USA:46th AIAA Aerospace Sciences Meeting and Exhibit including The New Horizons Forum and Aerospace Exposition,2008.
[10] Wenting Sun, Zheng Chen, Xiaolong Gou, et al.A Path Flux Analysis Method for the Reduction of Detailed Chemical Kinetic Mechanisms[J].Combustion and Flame, 0,7(7):1298-1307.
[11] Montgomery C J, Cannon S M, Mawid M A, et al.Reduced Chemical Kinetic Mechanisms for JP-8 Combustion[R].AIAA 2002-0336.
[12] Montgomery C J, Cremer M A, Chen J Y, et al.Reduced Chemical Kinetic Mechanisms for Hydrocarbon fuels[R]. AIAA 99-2220.
[13] Lam S H.Using CSP to Understand Complex Chemical Kinetics[D].USA:Department of Mechanical and Aerospace Engineering Princeton University, 1992.
[14] TianFeng Lu, Yiguang Ju,Chung K.Law, Complex CSP for Chemistry Reduction and Analysis[R]. AIAA 2001-0943.
[15] Mass U, Pope S B.Implementation of Simplified Chemical Kinetics Based on Intrinsic Low-Dimensional Mainfolds[C].USA:24th Symp(Int) on Combust,1992:103-112.
[16] Battin-Leclerc F, Glaude PA, Warth V,et al.Computer Tools for Modelling the Chemical Phenomena Related to Combustion[J].Chem Engineering Sci, 0,5(15):2883-2893.
[17] Fournet R, Bauge JC, Battin-Leclerc F.Experimental and Modeling of Oxidation of Acetylene, Propyne, Allene and 1,3-Butadiene[J].Int.J.Chem.Kinet, 9,1(5):361-379.
[18] Manion J A, Huie R E, Levin R D, et al.NIST Chemical Kinetics Database, NIST Standard Reference Database 17 (Web Version)[S].Gaithersburg:National Inst.of Standards and Technology,20899-8380.
[19] Li J, Shao JX, Liu CX, et al.Pyrolysis Mechanism of Hydrocarbon Fuels and Kinetic Modeling[J]. Acta Chim.Sin., 0,8(3):239-245.
[20] Jiao Y, Li J, Wang JB, et al.Experimental and Kinetics Simulation on Pyrolysis of N-Decane[J]. Acta Phys.Chim.Sin., 1,7(5):1-9.
[21] Kee R J, Miller J A.Chemkin – Ⅱ A Fortran Chemical Kinetics Package for the Analysis of Gas-Phase Chemical Kinetics[R].SAND 89-8009B.