航空发动机整机二维气动热力数值模拟

推进技术 ›› 2012, Vol. 33 ›› Issue (3): 333-337.

• 气动热力学 • 下一篇

航空发动机整机二维气动热力数值模拟

昌中宏,唐海龙

北京航空航天大学能源与动力工程学院/航空发动机数值仿真研究中心,北京 100191;北京航空航天大学能源与动力工程学院/航空发动机数值仿真研究中心,北京 100191

发布日期:2021-08-15
作者简介:昌中宏(1983—),男,博士,研究领域为航空发动机数值仿真。E-mail:czhhong@gmail.com

Aerothermodynamic Numerical Simulation of Integrated Aero Engine System

Aeroengine Numerical Simulation Research Center/College of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;Aeroengine Numerical Simulation Research Center/College of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

Published:2021-08-15

摘要/Abstract

摘要： 研究了用于航空发动机整机数值仿真的含粘性力项的二维欧拉流动模型,进行了整机流场数值仿真。用代数和椭圆形偏微分方程混合方法分别生成叶栅通道和燃烧室内贴体坐标网格；分别针对压气机转子、静子和涡轮叶栅,定义了三种不同损失系数；采用高阶精度Godunov格式和时间推进法,交替使用显/隐格式,收敛速度快,计算准确度高。计算了某双轴涡扇发动机设计点的整机性能与部件性能,计算结果与设计数据相吻合,分析整机仿真计算得出的流场参数分布,可以更好的了解流场细节。数值试验表明,建立的程序可以预测发动机稳态条件下的整机性能以及用于发动机的设计与改进,奠定了二维数值试验台建设的基础。

关键词: 航空发动机;粘性流;气动热力学;数值仿真

Abstract: A two dimensional flow Euler model with viscous force terms was constructed for integrated turbofan engine systems. Grids in the flow passage and combustion chamber were generated by employing algebraic and elliptically partial differential equation composite methods. Three viscous losses coefficients in accordance with compressor rotors, stators and turbine blades were defined separately. Flow calculation from engine inlet to exit was executed using high order Godunov scheme, time matching method and alternatively explicit/imp licit schemes. Convergence was fast and the accuracy was satisfactory. The flow control characteristics and the effects of inner duct exit dimension on overall engine performances were presented by the program. The simulation results show good accuracy compared with test data, which provides the possibility to investigate the flow in details.

Key words: Aeroengine; Viscous flow; Aero thermodynamics; Numerical simulation

昌中宏,唐海龙. 航空发动机整机二维气动热力数值模拟[J]. 推进技术, 2012, 33(3): 333-337.

参考文献

[2] 刘大响.对加快发展我国航空动力的思考[J].航空动力学报,2001,16(1):1-7.
[3] 刘大响.航空发动机技术的发展和建议[J].中国科学工程,1999,1(2):24-29.
[4] 刘大响,程荣辉.世界航空动力技术的现状及发展动向[J].北京航空航天大学学报,2002,28(5):490-496.
[5] 刘大响.抓住机遇迎接挑战实现航空动力跨越发展[J].燃气涡轮试验与研究,2002,15(1):1-5.
[6] 黄家骅,于廷臣,冯国泰.某小型涡扇发动机全流道准三维数值解法[J].航空发动机,2005,31(2):42-45.
[7] 冯国泰, 黄家骅, 李海滨,等.涡轮发动机三维多场耦合数值仿真的数学模型[J].上海理工大学学报,2001,23(3):189-192.
[8] Ivanov M Ja,Krupa V G,Nigmatullin R Z.On the CFD Monotone High Accuracy Methods[J].AGARD lecture Series LS8,4,(2).
[9] 王松涛,袁宁.具有TVD性质的三阶精度Godunov格式在粘性流场计算中的应用[J].工程热物理学报,9,0(3):299-303.
[10] 施发树,刘兴洲.多部件模型在全尺寸小型双函道涡扇发动机气流数值模拟中的应用[J].推进技术,1998,19(4):22-26.(SHI Fa-shu,LIU Xing-zhou.Multicomponent Models in Application to Numerical Simulation of a Small Full-Sized By-Pass Turbofan Engine[J].Journal of Propulsion Technology,8,9(4):22-26.)
[11] Nigmatullin M Ja, Ivanov R Z.Interconnected Multi-Level Design of Gas Turbine Elements [R].AIAA 2003-1215.
[12] 王松涛,袁宁.具有TVD性质的三阶精度Godunov格式在粘性流场计算中的应用[J].工程热物理学报,9,0(3):299-303.
[13] CAIM.S₂ Euler Code for Gas Flow Calculation Through Gas Engine Flow Passage Cpdes Description [R].CAIM,2007.
[14] Denton J D.Loss Mechanisms in Turbomachines[J].The 1993 IGTI Scholar Lecture, Transactions of the ASME, Journal of Turbomachinery,3,5:631-656.
[15] Nigmatullin M Ja,Ivanov R Z.Loss Mechanisms and Unsteady Flows in Turbomachines[R]. AGARD-CP-1,6.
[16] Bloch G S.Flow Losses in Supersonic Compressor Cascades[D].Blacksburg, VA:Ph.D.Dissertation, Mechanical Engineering Dept., Virginia Polytechnic Institute and State University,1996.
[17] Wright M J, Candler G V, Prampolini M.Data Parallel Lower-Upper Relaxation Method for the Navier-Stokes Equations [J].AIAA Journal, 6,4(7):1371-1377.

航空发动机整机二维气动热力数值模拟

Aerothermodynamic Numerical Simulation of Integrated Aero Engine System

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价