畸变进气下叶片弯曲对某转子叶尖区域流场的影响

推进技术 ›› 2012, Vol. 33 ›› Issue (4): 559-565.

畸变进气下叶片弯曲对某转子叶尖区域流场的影响

史亚锋,吴虎,毛凯,杨金广

西北工业大学动力与能源学院,陕西西安 710072;西北工业大学动力与能源学院,陕西西安 710072;西北工业大学动力与能源学院,陕西西安 710072;西北工业大学动力与能源学院,陕西西安 710072

发布日期:2021-08-15
作者简介:史亚锋(1979—),男,博士生,研究领域为叶轮机械内气体动力学。E-mail:syf1180@163.com

Effects of Lean Rotor on Rotor Tip Region Under Inlet Distortion

School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China;School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China;School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China;School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China

Published:2021-08-15

摘要/Abstract

摘要： 以跨声速轴流压气机NASA转子11为原型进行周向弯曲改进,对得到的周向弯曲转子与原型转子内流场在相同的进出口条件和设计转速下进行了非定常数值模拟,结果表明:在一个非定常周期的不同时刻,弯曲叶片叶尖前缘压力面与吸力面静压差都小于原型转子,弯曲转子叶尖处低轴向速度气流团的位置相比原型转子更靠近出口,同时弯曲叶片吸力面附面层内的低能流体更不容易向叶尖区域迁移。 

关键词: 转子;周向弯曲;周向总压畸变进气;静压差;叶尖;轴向速度

Abstract: A lean rotor was produced on the basis of transonic compressor NASA rotor 11 original geometry. The unsteady numerical simulation for the flow fields of this lean rotor and rotor 11 under design rotation speed was performed. The numerical results show that the static pressure difference at lean rotor tip section leading edge is lower compared with original rotor. The position of low axial velocity fluid at lean rotor tip is nearer to the outlet, and the lean rotor prevents the low energy fluid on suction side flowing into the blade tip clearance.

Key words: Rotor; Circumferential lean; Circumferential total pressure distortion inlet; Static pressure difference; Blade tip；Axial velocity

史亚锋,吴虎,毛凯,杨金广. 畸变进气下叶片弯曲对某转子叶尖区域流场的影响[J]. 推进技术, 2012, 33(4): 559-565.

参考文献

[2] 王会社,袁新,钟兢军,等.叶片正弯曲对压气机叶栅叶片表面流动的影响[J].推进技术,4,5(3):210-214.(WANG Hui-she,YUAN Xin,ZHONG Jing-jun,et al.Influence of Positive Curving on Blade Surface Flow of Compressor Cascade[J].Journal of Propulsion Technology,4,5(3):210-214.)
[3] 李杨,欧阳华,杜朝辉.低压轴流风机周向弯曲叶片顶部间隙流动的数值分析[J].动力工程,6,6(5):707-711.
[4] 毛明明,宋彦萍,王仲奇.跨音轴流压气机动叶的三维弯掠设计研究[J].动力工程,8,8(1):58-62.
[5] 张晓东,吴虎,黄健.跨声速轴流压气机叶片周向弯曲的数值优化[J].航空动力学报,8,3(10):1908-1912.
[6] Mokelke H.The Prediction of Steady Circumferential Pressure and Temperature Distortions in Multistage Axial Flow Compressors[J].ASME Journal of Engineering for Power, 0,2:448-458.
[7] Mazzawy R S.Modeling and Analysis of the TF30-P-3Compressor System with Inlet Pressure Distortion[R].NASA CR- 6,6.
[8] Debogdan C E.Effect of a 180 Extent Inlet Pressure Distortion on the Internal Flow Conditions of a TF30-P-3 Engine[R].NASA TM X-7,5.
[9] Marshall J G.Prediction of Low Engine Order Inlet Distortion Driven Response in a Low Aspect Ratio Fan[R].ASME 2000-GT-0374.
[10] 黄健,吴虎,张晓东.轴流压气机对周向总压畸变非定常响应的数值模拟[J].航空动力学报,8,3(9):1701-1706.
[11] Cossar B F J, Peacock R E, Moffatt W C.Compressor Rotating Stall in Uniform and Nonuniform Flow[J]. ASME Journal of Energy for Power, 0,2:762-769.
[12] Sanger N L.Performance of A 1.57-Pressure-Ratio Transonic Fan Stage with a Screen-Induced 90°Circumferential Inlet Flow Distortion[R].NASA TN-D3,5.
[13] Hah C, Rabe D C, Sullivan T J,et al.Effects of Inlet Distortion on the Flow Feild in a Transonic Compressor Rotor[J].ASME Journal of Turbomachinary, 8,0:233-246.
[14] Hall E J, Topp D A, Heigegger N J, et al.Endwall Treatment Inlet Flow Distortion Analysis Final Report[R].NAS3-0,6.
[15] Naixing Chen.Aerothermodynamics of Turbomachinery-Analysis and Design[M].CHN:John Wiley & Sons (Asia) Pte Ltd,2010.