唇口形状对二元进气道性能影响数值模拟

推进技术 ›› 2012, Vol. 33 ›› Issue (5): 683-688.

唇口形状对二元进气道性能影响数值模拟

石磊,何国强,秦飞,刘佩进

西北工业大学燃烧、热结构与内流场重点实验室,陕西西安 710072;西北工业大学燃烧、热结构与内流场重点实验室,陕西西安 710072;西北工业大学燃烧、热结构与内流场重点实验室,陕西西安 710072;西北工业大学燃烧、热结构与内流场重点实验室,陕西西安 710072

发布日期:2021-08-15
作者简介:石磊(1986—),男,博士生,研究领域为航空宇航推进理论与工程。E-mail:shilei050432@163.com

Numerical Investigation of Effects of Cowl Lip Shape on 2-D Inlet

Science and Technology on Combustion, Internal Flow and Thermal-structure Laboratory, Northwestern Polytechnical University, Xi’an 710072, China;Science and Technology on Combustion, Internal Flow and Thermal-structure Laboratory, Northwestern Polytechnical University, Xi’an 710072, China;Science and Technology on Combustion, Internal Flow and Thermal-structure Laboratory, Northwestern Polytechnical University, Xi’an 710072, China;Science and Technology on Combustion, Internal Flow and Thermal-structure Laboratory, Northwestern Polytechnical University, Xi’an 710072, China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究唇口形状对二元混压式进气道的性能影响,采用Fluent进行了数值模拟。研究发现,唇口面积的减小会带来一定的流量损失,但可以有效地降低起动马赫数,提高总压恢复系数。同时,据此提出了二元进气道的一种优化设计方法。 

关键词: 唇口;形状;二元进气道;影响;数值模拟

Abstract: Aimed at investigating the effects of cowl lip shape on 2-D inlet, Fluent was adopted for numerical simulation. A conclusion is drawn that the reduction of area of the cowl lip can cut down the starting Mach number of the inlet effectively at price of sacrificing some mass flow. Meanwhile, the total pressure recovery is improved. Based on that, an optimized design method was put forward finally.

Key words: Cowl lip; Shape; 2-D inlet; Effect; Numerical simulation

石磊,何国强,秦飞,刘佩进. 唇口形状对二元进气道性能影响数值模拟[J]. 推进技术, 2012, 33(5): 683-688.

参考文献

[2] 金志光,张堃元.宽马赫数范围高超声速进气道伸缩唇口式变几何方案[J].宇航学报, 0,1(5):1503-1510.
[3] 金志光,张堃元.宽马赫数范围高超声速进气道转动唇口变几何方案研究[J].航空动力学报,0,5(7):1553-1560.
[4] 金志光,张堃元.高超侧压式进气道简单唇口调节方案设计[J].推进技术,8,9(1):43-48.(JIN Zhi-guang,ZHANG Kun-yuan.Concept of a Varied Geometry Scramjet Inlet with Rotatable Cowl[J].Journal of Propulsion Technology,8,9(1):43-48.)
[5] 冯定华,范晓樯,丁国昊,等.一组不同内收缩比二维进气道唇口开启过程实验研究[J].实验流体力学,8,2(3):18-22.
[6] 潘瑾,张堃元.移动唇口变收缩比侧压式进气道反压特性和自起动性能[J].航空动力学报,9,4(1):104-109.
[7] Huebner L D, Rock K E, Ruf E G, et al.Hyper-X Flight Engine Ground Testing for X-43 Flight Risk Reduction [R].AIAA 2001-1809.
[8] Albertson Cindy W,Emami Saied,Trexler Carl A.Mach 4 Test Results of a Dual-Flowpath, Turbine Based Combined Cycle Inlet [R].AIAA 2006-8138.
[9] Falempin F, Eendling E, Goldfeld M, et al.Experimental Investigation of Starting Process for a Variable Geometry Air Inlet Operating From Mach 2 to Mach 8 [R].AIAA 2006-4513.
[10] 王翼.高超声速进气道启动问题研究[D].长沙:国防科学技术大学,2008.
[11] Goldman A, Willis B P.Test Results of a Fixed Geometry RBCC Inlet [R].AIAA 99-2589.
[12] 石磊,何国强,秦飞,等.某RBCC样机进气道的设计及数值模拟[J].航空动力学报,1,6(8):1801-1807.
[13] 严红明,钟兢军,韩吉昂,等.二元外压式进气道侧板对流场影响[J].航空动力学报,0,5(8):1783-1790.
[14] 刘晓伟,何国强,刘佩进.几何高度对RBCC发动机超声速侧压式进气道起动性能的影响[J].航空动力学报,0,5(8):1799-1804.
[15] 刘兴洲.飞航导弹动力装置[M].北京:中国宇航出版社,1992.
[16] 雷雨冰,梁德旺,黄国平.超声速流中激波/湍流附面层干扰数值模拟[J].南京航空航天大学学报,4,6(1).
[17] 刘晓伟,何国强,秦飞.宽马赫数固冲二元进气道设计与研究[J].宇航学报,8,9(5):1-6.