传热设计流程在涡轴涡轮冷却中的应用

推进技术 ›› 2013, Vol. 34 ›› Issue (11): 1520-1529.

传热设计流程在涡轴涡轮冷却中的应用

罗磊¹,王松涛¹,迟重然^1,2,温风波¹,卢少鹏¹,刘轶¹

哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001

发布日期:2021-08-15
作者简介:罗磊(1987—),男,博士生,研究领域为气冷涡轮叶片气动与传热设计。E-mail:luolei_hit@126.com
基金资助:
国家自然科学基金委创新研究群体(51121004)。

Application of Heat Transfer Design Process for Turbine in Turbo Shaft Engine

School of Energy Science and Engineering Harbin Institute of Technology, Harbin 150001, China;School of Energy Science and Engineering Harbin Institute of Technology, Harbin 150001, China;School of Energy Science and Engineering Harbin Institute of Technology, Harbin 150001, China;School of Energy Science and Engineering Harbin Institute of Technology, Harbin 150001, China;School of Energy Science and Engineering Harbin Institute of Technology, Harbin 150001, China;School of Energy Science and Engineering Harbin Institute of Technology, Harbin 150001, China

Published:2021-08-15

摘要/Abstract

摘要： 为了设计适用于涡轴发动机涡轮动叶的冷却结构,将一套涡轮传热设计流程应用于动叶冷却结构设计中,设计后对管网计算不能准确模拟叶顶出流提出改进措施。结果表明:管网计算与全三维气热耦合计算流量差异约为8.8%,平均温度差异约10.1%,管网计算具有方案设计的功能,管网计算温度场与三维温度场计算平均温度差异约为7.6%,三维温度场计算具有作为管网计算后续温度场细致分析的功能；采用该设计流程能够有效减少冷却结构设计的盲目性,使冷却结构设计更加灵活方便；改进管网计算边界添加方式后叶顶未发生燃气倒灌,叶顶第一除尘孔冷气量为0.715g/s,第二除尘孔冷气量为0.139g/s,尾缘劈缝总流量为1.935g/s,通过改进边界添加方式能够增加管网计算精度。 

关键词: 流程;涡轮;管网计算;温度;气热耦合 

Abstract: In order to design a rotor blade cooling structure in turbo shaft engine, a set of turbine heat transfer design process was applied,and measures to improve the pipe network calculation in accurately simulated flow in tip of blade were proposed. The results show that the flow rate difference between pipe network and the aero-thermal conjugated calculation is about 8.8%, while the difference of average temperature is about 10.1%. Pipe network has the function of program design, the difference of average temperature between pipe network and three-dimensional temperature field calculation is about 7.6%.Three-dimensional temperature field calculation has the function of analyzing the detail of temperature after pipe network. By using this design process the blindness of designing cooling structure can be reduced and design of cooling structure will be more flexible.After improving the method of adding boundary in pipe network, intrusion has not occurred, flow rate in the first dust hole is 0.715g/s, while in the second dust hole is 0.139g/s, the flow rate in trailing edge split is 1.935g/s.By improving the method the accuracy of pipe network calculation can be promoted.

Key words: Process; Turbine; Pipe network calculations; Temperature; Aero-thermal conjugated

罗磊,王松涛,迟重然,温风波,卢少鹏,刘轶. 传热设计流程在涡轴涡轮冷却中的应用[J]. 推进技术, 2013, 34(11): 1520-1529.

LUO Lei¹, WANG Song-tao¹, CHI Zhong-ran^1,2, WEN Feng-bo¹, LU Shao-peng¹, LIU Yi¹. Application of Heat Transfer Design Process for Turbine in Turbo Shaft Engine[J]. Journal of Propulsion Technology, 2013, 34(11): 1520-1529.

参考文献

[1] Hennecke D K.Turbine Cooling in Aeroengines[R].Von Karman Inst.LS 1982-02.
[2] 李文,张新敬,张华良.涡轴发动机涡轮部件改型分析[J].推进技术,2010,31(3):314-319.(LI Wen, ZHANG Xin-jing, ZHANG Hua-liang.Aerodynamic Investigation on Retrofit for Turbine of a Turbo-Shaft Engine [J].Journal of Propulsion Technology, 2010,31(3):314-319.)
[3] Mazur Z, Hernandez-Rossette A, Garcia-Illescas R,et al.Analysis of Conjugate Heat Transfer of a Gas Turbine First Stage Nozzle[R].ASME 2005-GT-68004.
[4] Takahashi T, Watanabe K, Sakai T.Conjugate Heat Transfer Analysis of a Rotor Blade with Rib-Roughened Internal Cooling Passages [R].ASME 2005-GT-68227.
[5] 黄洪雁, 陈凯, 董平, 等.气热耦合多孔气膜冷却的数值研究[J].工程热物理学报, 2007,8(增刊1):81-84.
[6] 王松涛,迟重然,温风波,等.涡轮动叶冷却结构设计方法I:参数化方法[J].工程热物理学报,2011,32(4):581-584.
[7] 迟重然,温风波,王松涛,等.涡轮动叶冷却结构设计方法II-管网计算[J].工程热物理学报,2011,32(6):933-936.
[8] 迟重然.气冷涡轮叶片的传热设计[D].哈尔滨:哈尔滨工业大学硕士论文,2010.
[9] 陈凯.燃气涡轮冷却结构设计与气热弹多场耦合的数值研究[D].哈尔滨:哈尔滨工业大学博士论文.2009.
[10] 王仲奇,秦仁.透平机械原理[M].北京:机械工业出版社,1981.
[11] Kostege V K, Halturin V A, Sundurin V G.Simulation of Multidisciplinary Problems for the Thermostress State of Cooled High Temperature Turbines[R].AGARD lecture series TCP 02/LS198:Mathematical models of gas turbine engines and their components, 1994.
[12] Jen H F,Sobanik J B.Cooling Air Flow Characteristics in Gas Turbine Components[R].ASME 81-GT-76.
[13] Kumar G N, Roelky R J, Meiner P L.A Generalized one Dimensional Computer Code for Turbomachinery Cooling Passage Flow Calculations[R].AIAA 89-2574.
[14] 王华阁.航空发动机设计手册.第16分册-空气系统及传热分析[M].北京:航空工业出版社, 2001.
[15] 董平.航空发动机气冷涡轮叶片的气热耦合数值模拟研究[D].哈尔滨:哈尔滨工业大学博士论文, 2009.
[16] 虞跨海,杨茜,岳珠峰.高压涡轮冷却叶片叶顶结构气动与传热[J].推进技术,2012,175-178.(YU Kua-hai, YANG Xi, YUE Zhu-feng.Aerodynamic and Heat Transfer of Cooling Blade Tips for High Pressure Turbine [J].Journal of Propulsion Technology, 2012:175-178.)