通气模型内流道阻力直接测量技术

推进技术 ›› 2013, Vol. 34 ›› Issue (3): 311-315.

通气模型内流道阻力直接测量技术

许晓斌^1,2,舒海峰¹,谢飞¹,张德炜¹

中国空气动力研究与发展中心超高速所,四川绵阳 621000;中国空气动力研究与发展中心超高速所,四川绵阳 621000;中国空气动力研究与发展中心超高速所,四川绵阳 621000;中国空气动力研究与发展中心超高速所,四川绵阳 621000

发布日期:2021-08-15
作者简介:许晓斌(1972—),男,研究员,研究领域为高超声速风洞试验技术、风洞天平技术。 E-mail:scmy-xxb@163.com

Technique Investigation on Flow-Through Model Inner-Flow Drag Straightway Measured by Strain-Gauge Balance

Hypervelocity Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang 621000,China;Hypervelocity Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang 621000,China;Hypervelocity Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang 621000,China;Hypervelocity Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang 621000,China

Published:2021-08-15

摘要/Abstract

摘要： 推阻特性是吸气式飞行器研制中最为关注的气动特性问题之一。为研究通气模型内流道阻力特性,在中国空气动力研究与发展中心(CARDC)超高速所的1m高超声速风洞上开展了吸气式飞行器通气模型内流道阻力直接测量技术研究。研究选取吸气式飞行器的一个内流道模块为研究对象,通过将内流道模块与模型其余部分进行分离设计、采用特种应变天平直接测量模型内流道气动力的方法得到通气模型内阻,同时进行了干扰因素分析和试验数据修正方法研究,开展了Ma=4条件下的内流道阻力测量试验并给出了典型试验结果。试验结果表明,通气模型内阻随攻角和喉道高度变化而变化。 

关键词: 吸气式飞行器;通气模型;内流道;阻力;风洞试验 

Abstract: The thrust-drag characteristic is important to the design of airbreathing vehicle. A wind tunnel experimental technique investigation was studied to measure the inner drag of flow-though model in 1m wind tunnel of China Aerodynamics Research and Development Center. The inner flow passage of an airbreathing vehicle was separated from other parts of the model to measure the inner aerodynamic force with a specially designed strain-gauge balance. The error factors which may affect the test result precision were discussed, along with test data correction methods. A wind tunnel test was conducted at Ma=4, and the test results indicate that the inner flow drag varies with the angle of attack and throat size of the inlet.

Key words: Air-breathing vehicle; Flow-through model; Inner flow path; Drag; Wind tunnel test

许晓斌,舒海峰,谢飞,张德炜. 通气模型内流道阻力直接测量技术[J]. 推进技术, 2013, 34(3): 311-315.

XU Xiao-bin^1,2,SHU Hai-feng¹, XIE Fei¹, ZHANG De-wei¹. Technique Investigation on Flow-Through Model Inner-Flow Drag Straightway Measured by Strain-Gauge Balance[J]. Journal of Propulsion Technology, 2013, 34(3): 311-315.

参考文献

[1] Mcclinton C R,Hunt J L,Ricketts R H,et al.Air Breathing Hypersonic Technology Vision Vehicles and Development Dreams [R].AIAA 99-4978.
[2] 乐嘉陵.吸气式高超声速技术研究进展[J].推进技术,2010,1(6):641-649.(LE Jia-ling.Progress in Air-Breathing Hypersonic Technology[J].Journal of Propulsion Technology,2010,1(6):641-649.)
[3] Francois Falempin.French Contribution to Hypersonic Airbreathing Propulsion Technology Development[J].Journal of Propulsion Technology,2010,1(6).(Francois Falempin.法国高超声速冲压发动机技术研究[J].推进技术,2010,31(6).)
[4] 白菡尘,王泽江.高超声速冲压发动机-飞行器计力体系讨论[J].推进技术,2012,3(1):1-6.( BAI Han-chen,WANG Ze-jiang.Discussion on Force-Accounting System for Airbreathing Hypersonic Vehicle[J].Journal of Propulsion Technology,2012,3(1):1-6.)
[5] Holland Scott D,Woods William C,Engelund Walter C.Hyper-X Research Vehicle Experimental Aerodynamics Test Program Overview[J].Journal of Spacecraft and Rockets ,2001,8(6):11-12.
[6] Engelund Walter C, Holland Scott D, Charles E.Aerodynamic Database Development for the Hyper-X Airframe Integrated Scramjet Propulsion Experiments[R].AIAA 2000-4006.
[7] 张红英,孙姝,程克明,等.进气道工作状态对吸气式高超声速飞行器气动力特性影响的实验研究[J].宇航学报,2007,8(6):1488-1493.
[8] 金亮,柳军,罗世彬,等.高超声速一体化飞行器冷流状态气动特性研究[J].实验流体力学,2010,24(1):42-45.
[9] 张红英,程克明,伍贻兆.某高超飞行器流道冷流特征及气动力特性研究[J].空气动力学学报,2009,7(1):119-123.
[10] Huebner Lawrence D,Witte David W.Exhaust Simulation Testing of a Hypersonic Airbreathing Model at Transonic Speeds[R].AIAA 2003-7001.
[11] 张红英,孙姝,程克明,等.不同飞行工况下的某高超飞行器流道特征及气动力特性研究[J].航空动力学报,2008,3(12):2262-2267.
[12] 骆晓臣,张堃元.侧压式进气道内部阻力分析[J].推进技术,2007,8(2):204-207.(LUO Xiao-chen,ZHANG Kun-yuan.Analysis for Internal Drag in Sidewall-compression Inlet[J].Journal of Propulsion Technology, 2007,8(2):204-207.)
[13] 恽起麟.风洞试验[M].北京:国防工业出版社,2002.
[14] 恽起麟.实验空气动力学[M].北京:国防工业出版社,1991.