缝隙扩压叶栅近壁流场与流动损失实验

推进技术 ›› 2013, Vol. 34 ›› Issue (3): 332-338.

缝隙扩压叶栅近壁流场与流动损失实验

陈焕龙,李得英,俞建阳,王云飞,刘华坪,陈浮

哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001;哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨 150001

发布日期:2021-08-15
作者简介:陈焕龙(1982—),男,博士,讲师,研究领域为叶轮机械设计与气动热力学分析,水下航行体流体动力学分析。E-mail:chenhuanlong@126.com
基金资助:
中央高校基本科研业务费专项资金(HIT. NSRIF. 201173)。

Experimental Investigation of Near-Wall Flow and Flow Loss in Compressor Cascades with Slots Injection

School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001,China;School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001,China;School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001,China;School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001,China;School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001,China;School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001,China

Published:2021-08-15

摘要/Abstract

摘要： 为了探索缝隙射流对高负荷扩压叶栅气动性能与近壁流场结构的影响机制,实验研究了设计冲角下有/无缝隙结构的高负荷弯曲扩压叶栅近壁流场结构与出口气动损失分布规律,获得了叶片近壁压力场数据、流动图谱以及叶栅出口流动损失参数。结果表明,缝隙两端压差导致的从叶片压力面到吸力面的射流能够增加附面层高熵流体的能量,缝隙射流将局部积聚的低能流体及时引向主流,减小高熵流体在叶展中部或端区掺混撞击,抑制了栅后尾迹高熵流体的过度聚集,从而有效提高高负荷压气机叶栅气动性能。 

关键词: 压气机叶栅;缝隙叶片;附面层;流场;流动损失 

Abstract: In order to explore the influence mechanism to the aerodynamic performance and the near-wall flow structure on a high load compressor cascade with slots injection, the cascade near-wall flow structure and flow losses in outlet were investigated experimentally on the high-loading compound lean compressor cascades with/without slots under the design incidence angle. The cascade near-wall pressure, flow contour and the outlet flow loss parameters were obtained. The results indicate that the energy of the boundary layer high entropy fluid is increased via the air injection, which is implemented via the slot penetration through the pressure and suction surfaces under the effect of the pressure difference between the two sides.The local concentration low energy fluid is led to mainstream in time.The impact and mixing effect, the excessive accumulation of high entropy fluid are controlled preferably in wake region after cascade.Thus,the aerodynamic performance of high-loading compressor cascade is improved effectively. 

Key words: Compressor cascades; Slot blade; Boundary layer;Flow field;Flow loss

陈焕龙,李得英,俞建阳,王云飞,刘华坪,陈浮. 缝隙扩压叶栅近壁流场与流动损失实验[J]. 推进技术, 2013, 34(3): 332-338.

CHEN Huan-long,LI De-ying,YU Jian-yang,WANG Yun-fei,LIU Hua-ping,CHEN Fu. Experimental Investigation of Near-Wall Flow and Flow Loss in Compressor Cascades with Slots Injection[J]. Journal of Propulsion Technology, 2013, 34(3): 332-338.

参考文献

[1] Deich M E,Gubalev A B, Filippov G A,et al.A New Method of Profiling the Guide Vane Cascade of Stage with Small Ratios Diameter to Length[J].Teplienergetika,1962,8:42-46.
[2] Wang Zhongqi, Lai Shengkai,Xu Wenyuan.Aerodynamic Calculation of Turbine Stator Cascades with Curvilinear Leaned Blades and Some Experimental Results[C].India:Symposium paper of 5th ISABE,1981.
[3] 苏杰先,王仲奇.叶片的弯扭联合气动成型理论、实验、设计及其应用[J].动力工程,1992,2(6):1-7.
[4] 苏杰先, 冯国泰, 闻洁,等.弯曲叶片在压气机中的应用[J].工程热物理学报, 1990,1(4):404-407.
[5] 特雷申科.压气机叶栅的空气动力学[M].北京:机械工业出版社,1985.
[6] Kerrebrock J L, Reijnan D P,Ziminsky W S, et al.Aspirated Compressors[R].ASME 97-GT-525.
[7] Kerrebrock J L,Drela M, Merchant A A, et al.A Family of Designs for Aspirated Compressors[R].ASME 98-GT-196.
[8] Kerrebrock J L.The Prospects for Aspirated Compressors[R].AIAA 2000-2472.
[9] Reijnen D P.Experimental Study of Boundary Layer Suction in a Transonic Compressor[D].Cambridge,MA:MIT, 1997.
[10] Merchant A A.Design an Analysis of Supercritical Airfoils with Boundary Layer Suction[D].Cambridge,MA:MIT,1996.
[11] Merchant A A.Design and Analysis of Axial Aspirated Compressor Stages[D].Cambridge, MA:MIT,1999.
[12] Merchant A A,Drela M, Kerrebrock J L.Aerodynamic Design and Analysis of a High Pressure Ratio Aspirated Compressor Stage[R].ASME 2000-GT-619.
[13] Merchant A A.Aerodynamic Design and Performance of Aspirated Airfoils[R].ASME 2002-GT-30369.
[14] 鲁嘉华,张志刚,朱鸿.压气机弦向缝隙叶栅的气体动力学研究[J].上海工程技术大学学报,2000,14(1):14-20.
[15] 张相毅,周敏,王如根,等.叶片压力面到吸力面射流对其气动特性的影响[J].空气动力学学报,2006,4(2):152-156.
[16] Dennis E, Culley M, Bright M.Activective Flow Separation Control of a Stator Vane Using Surface Injection in a Multistage Compressor Experiment[R].ASME 2003-GT-38863.
[17] Chaoqun Nie, Gang Xu, Xiaobin Cheng, et al.Micro Air Injection and Its Unsteady Response in a Low-Speed Axial Compressor[R].ASME 2002-GT-30361.
[18] Kirtley K R, Graziosi P, Wood P, et al.Design and Test of an Ultra-Low Solidity Flow Controlled Compressor Stator[ R].ASME 2004-GT-53012.