超燃冲压发动机性能的准二维计算方法

推进技术 ›› 2013, Vol. 34 ›› Issue (4): 457-462.

超燃冲压发动机性能的准二维计算方法

任鑫,罗春钦,董建明,郭雪莲,马雪松

中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074;中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074;中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074;中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074;中国航天科工集团三十一研究所高超声速冲压发动机技术重点实验室,北京 100074

发布日期:2021-08-15
作者简介:任鑫(1979—),男,博士,工程师,研究领域为超燃冲压发动机总体技术。 E-mail:renxin9600@sohu.com

Quasi-Two-Dimensional Evaluation of the Scramjet Performance

Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China;Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China;Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China;Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China;Science and Technology on Scramjet Laboratory, The 31st Research Institute of CASIC, Beijing 100074, China

Published:2021-08-15

摘要/Abstract

摘要： 为了能在双模态超燃冲压发动机流道方案初步论证中提供一种较快速的发动机性能计算方法,在二维N-S方程基础上,引入一维完全燃烧计算方法,提出了预估超燃冲压发动机性能的准二维计算方法。该方法能够计入激波、边界层分离等对发动机性能的影响,可在较短时间计算出整机推力、比冲性能和沿程热力学参数。通过对自由射流发动机计算,验证了此方法。并在此基础上,初步分析了燃料喷注位置和流道构型对发动机性能的影响。 

关键词: 超燃冲压发动机;性能预估;数值模拟 

Abstract: Quasi-two-dimensional method for the computation of the dual-mode scramjet flow path was developed by introducing one-dimensional method for completed combustion to the two-dimensional N-S equation. The influences to the scramjet performance by shock and boundary layer separation were handled by this method.In addition,the thrust and impulse as well as the parameter variations along the axis direction of the scramjet were given in acceptable time. Validated by the computation of a freejet scramjet engine, the effects of different positions of fuel injection and flowpath on the engine performance were analyzed.

Key words: Scramjet; Performance evaluation; Numerical simulation

任鑫,罗春钦,董建明,郭雪莲,马雪松. 超燃冲压发动机性能的准二维计算方法[J]. 推进技术, 2013, 34(4): 457-462.

REN Xin,LUO Chun-qin,DONG Jian-ming,GUO Xue-lian,MA Xue-song. Quasi-Two-Dimensional Evaluation of the Scramjet Performance[J]. Journal of Propulsion Technology, 2013, 34(4): 457-462.

参考文献

[1] Andrews Earl H, Mackley Ernest A.NASA’s Hypersonic Research Engine Project-A Review[R].NASA TM-107759,4.
[2] Huebner Lawerence D.Hyper-X Engine Testing in the NASA Langley 8-Foot High Temperature Tunnel[R].AIAA 2000-3605.
[3] Hank Joseh M.The X-51A Scramjet Engine Flight Demonstration Program[R].AIAA 2008-2540.
[4] Norris Richard B.Freejet Test of the AFRL Hyset Scramjet Engine Model at Mach 6.5and 4.5[R].AIAA 2001-3196.
[5] 夏皮罗A H.可压缩流的动力学与热力学[M].北京:科学出版社,1978.
[6] 刘敬华,凌文辉,刘陵,等.超音速燃烧室性能非定常准一维流数值模拟[J].推进技术, 1998,9(1).(LIU Jing-hua, LING Wen-hui, LIU Ling, et al.A Quasi-one Dimensional Unsteady Numerical Analysis of Supersonic Combustor Performance[J].Journal of Propulsion Technology, 1998,9(1).)
[7] 王兰,邢建文,郑忠化,等.超燃冲压发动机内流性能的一维评估[J].推进技术, 2008,9(6).(WANG Lan, XING jian-wen, ZHENG zhong-hua, et al.One-Dimensional Evaluation of the Scramjet Flowpath Performance[J].Journal of Propulsion Technology, 2008,9(6).)
[8] Wyatt D D.Analysis of Errors Introduced by Several Methods of Weighting Nonuniform Duct Flows[R].NASA TN-3400,5.
[9] Malafferly G H.A Generalized Approach to the Definition of Average Flow Quantities in Nonuniform Streams[R].United Aircraft Corp.R-13534,4.
[10] 范作民,傅撰权.热力过程计算与燃气表[M].北京:国防工业出版社,1987.
[11] Cristian Birzer,Doolan Con J Quasi-One-Dimensional Modeling of Hydrogen Fuelled Scramjet Combustors[R].AIAA 2007-4314.
[12] Torrez Sean M,Driscoll James F.Scramjet Engine Model MASIV:Role of Mixing, Chemistry and Wave Interactions[R].AIAA 2009-4939.
[13] Heiser W H,Pratt D T.Hypersonic Airbreathing Propulsion[M].Washington:American Institute of Aeronautics and Astronautics,Inc.,1994.
[14] Jachimowski, C J.An Analytical Study of the Hydrogen-Air Reaction Mechanism With Application to Scramjet Combustion[R].NASA TP-2791,8.
[15] 俞刚, 李建国.氢/空气超声速燃烧研究[J].流体力学实验与测量, 1999,3(1).
[16] 梁德旺, 黄国平, 赵海峰.B/L湍流模型在强压力梯度流场计算中的应用[J].南京航空航天大学学报, 1999,1(1):37-42.
[17] 蓬达留克.冲压发动机[M].北京:国防工业出版社,1987.