液膜内冷与辐射外冷发动机室压上限的研究

推进技术 ›› 2013, Vol. 34 ›› Issue (6): 781-785.

液膜内冷与辐射外冷发动机室压上限的研究

张其阳,王兵,张会强,胡博文

清华大学航天航空学院,北京 100084;清华大学航天航空学院,北京 100084;清华大学航天航空学院,北京 100084;清华大学航天航空学院,北京 100084

发布日期:2021-08-15
作者简介:张其阳(1985—),男,硕士,研究领域为航空宇航推进理论。E-mail:zhangqy10@163.com

A Study on Chamber Pressure Upper Limit of Liquid Rocket Engine Utilizing Film and Radiative Cooling

School of Aerospace, Tsinghua University, Beijing 100084,China;School of Aerospace, Tsinghua University, Beijing 100084,China;School of Aerospace, Tsinghua University, Beijing 100084,China;School of Aerospace, Tsinghua University, Beijing 100084,China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究液膜内冷和辐射外冷方式小推力火箭发动机室压的设计上限,针对推力为1kN四氧化二氮/一甲基肼火箭发动机,开展了不同室压下发动机推力室构型设计和冷却性能计算。固定液膜冷却剂流量,比较分析了不同推力室室压下气壁温和热流的变化规律。研究发现,在推力和膜冷却流量不变条件下,随着室压的提高,推力室尺寸大幅度减小,热负荷大幅增加,最高气壁温也增加；在选用材料正常工作条件下,存在室压设计上限。 

关键词: 液体火箭发动机;推力室;膜冷却;辐射冷却 

Abstract: In order to study the chamber pressure upper limit of the low-thrust liquid rocket engine, the engine configuration design and cooling performance calculation were performed and validated for a 1kN N₂O₄/MMH liquid rocket engine utilizing liquid film inner cooling and radiative outer cooling. With the flux of film coolant fixed, the variations of wall temperature of the gas-side and heat flux were compared carefully. It is found that the dimension of the thruster chamber, as well as the film length, is decreased significantly and the wall temperature is then increased under the design conditions of the same specific pulse and the same film coolant flux. There is an upper design limit of chamber pressure under the normal work condition of the wall material. 

Key words: Liquid rocket engine; Thrust chamber; Film cooling; Radiative cooling

张其阳,王兵,张会强,胡博文. 液膜内冷与辐射外冷发动机室压上限的研究[J]. 推进技术, 2013, 34(6): 781-785.

ZHANG Qi-yang, WANG Bing, ZHANG Hui-qiang, HU Bo-wen. A Study on Chamber Pressure Upper Limit of Liquid Rocket Engine Utilizing Film and Radiative Cooling[J]. Journal of Propulsion Technology, 2013, 34(6): 781-785.

参考文献

[1] Schoenman L．High-Pressure Propulsion Advanced Concepts for Cooling[R]．IAF 85-191．
[2] 阿列马索夫.火箭发动机原理[M]．张宗钦,庄逢辰译．北京:宇航出版社,1993.
[3] 加洪.液体火箭发动机结构设计[M]．任汉芬译．北京:宇航出版社,1993.
[4] 狄连顺．液体火箭发动机原理[M]．长沙:国防科技大学出版社,1987.
[5] Sutton G P.History of Liquid-Propellant Rocket Engines in Russia, Formerly the Soviet Union[J].Journal of Propulsion and Power, 2003,9(6):1008-1037.
[6] Han P G, Namkoung H J, Kim K H.A Study on the Cooling Mechanism in Liquid Rocket Engine[R].AIAA 2004-3672.
[7] Han P G, Namkoung H J, Kim H J, et al.A Study on Heat Transfer Characteristics of Small Liquid Rocket Engine with Calorimeter[R].AIAA 2006-5195.
[8] Han P G,Cho W K.Evaluation on the Regenerative Cooling Characteristics in Liquid Rocket Engine of 10tf- Thrust Using Kerosene and Liquid Oxygen[J].Journal of KSASS, 2004,2(4):236-245.
[9] Miranda A W, Naraghi M H.Analysis of Film Cooling and Heat Transfer in Rocket Thrust Chamber and Nozzle[R].AIAA 2011-712.
[10] Matteo F D, Venanzi M, Betti B, et al.Modelling and Simulation of Film Cooling in Liquid Rocket Engine Propulsion Systems[R].AIAA 2012-3908.
[11] Arnold R, Suslov D, Haidn O.Film Cooling in High Pressure Subscale Combustion Chamber[J].Journal o fPropulsion and Power, 2010,6:428-438.
[12] Betti B, Martelli E, Nasuti F, et al.Numerical Study of Film Cooling in Oxygen/Methane Thrust Chambers[C].St Petersburg:In 4th European Conference for Aerospace Sciences, 2011.
[13] 刘国球, 任汉芬, 朱宁昌, 等.液体火箭发动机原理[M].北京:宇航出版社, 1993.
[14] 魏超, 张忠利.深空探测发动机热环境研究[J].航空动力学报, 2005,5(5):1139-1144.
[15] 马丁, 张黎辉.小推力发动机膜冷却工程算法研究[J].火箭推进, 2007,3(2):20-25.
[16] 郭平, 王慧珠.空间小推力发动机推力室喷注器的设计与身部冷却问题[J].上海航天, 1996,3:46-50.
[17] 休译尔.液体火箭发动机现代工程设计[M].朱宁昌译.北京:宇航出版社, 2003.
[18] 蔡国飙, 李家文, 田爱梅, 等.液体火箭发动机设计[M].北京:北京航空航天大学出版社, 2011:75-220.