带自适应流通处理机匣的轴流压气机全通道数值研究

推进技术 ›› 2013, Vol. 34 ›› Issue (7): 918-924.

带自适应流通处理机匣的轴流压气机全通道数值研究

张皓光,吴俊,楚武利,吴艳辉,李相君

西北工业大学动力与能源学院,陕西西安 710072;西北工业大学动力与能源学院,陕西西安 710072;西北工业大学动力与能源学院,陕西西安 710072;西北工业大学动力与能源学院,陕西西安 710072;西北工业大学动力与能源学院,陕西西安 710072

发布日期:2021-08-15
作者简介:张皓光(1981—),男,博士,副教授,研究领域为叶轮机械气动热力学。E-mail:zhg@nwpu.edu.cn
基金资助:
国家自然科学基金(51006084);国家自然科学基金重点项目(51236006);陕西省自然科学基金(2011JQ7018);西北工业大学基础研究基金(JC201116)。

Full-Annulus Numerical Investigation of Axial Flow Compressor with Self Recirculation Casing Treatment

School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China;School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China;School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China;School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China;School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China

Published:2021-08-15

摘要/Abstract

摘要： 采用全通道数值模拟方法研究了两种自适应流通装置数目的处理机匣对亚声速轴流压气机性能及流场的影响,非定常数值计算结果表明两种自适应流通处理机匣分别获得了6.3%,9%的失速裕度改进量,通过详细地分析压气机叶顶流场表明,高速喷射气流能抑制前缘溢流现象的产生,有效地改善了叶顶通道的流动状况。随着自适应流通装置数目从10增加到15,喷射气流对转子叶顶间隙泄漏流的影响频率也随着提高,因此增强了处理机匣抑制叶顶间隙泄漏流负面影响的能力。 

关键词: 处理机匣;轴流压气机;全通道;裕度改进量;前缘溢流 

Abstract: Effects on the performance and flow-field of subsonic axial-flow compressor are investigated with full-annulus numerical method with two kinds of self recirculation casing treatment,which are different in the number of self recirculation setting. The unsteady numerical calculative results show that stall margin improvement from 6.3% to 9% is achieved with two kinds of self recirculation casing treatment. The fundamental flow mechanism is obtained by detailed analyzing the flow-filed at the blade tip and the underlying mechanism consists of:(1) Leading edge spilling flow can be restrained by the high speed injecting flow coming from self recirculation casing treatment and consequently the flow-filed of blade tip passage is improved effectively. (2) When increasing the number of self recirculation setting from 10to 15, the frequency of injecting flow affecting tip leakage flow is improved.As the result,the ability of casing treatment to restrain the negative effects of tip leakage flow is enhanced. 

Key words: Casing treatment; Axial-flow compressor; Full-annulus; Margin improvement; Leading edge spilling flow

张皓光,吴俊,楚武利,吴艳辉,李相君. 带自适应流通处理机匣的轴流压气机全通道数值研究[J]. 推进技术, 2013, 34(7): 918-924.

ZHANG Hao-guang,WU Jun,CHU Wu-li,WU Yan-hui,LI Xiang-jun. Full-Annulus Numerical Investigation of Axial Flow Compressor with Self Recirculation Casing Treatment[J]. Journal of Propulsion Technology, 2013, 34(7): 918-924.