隔舱式双脉冲发动机金属膜片设计与实验研究

推进技术 ›› 2013, Vol. 34 ›› Issue (8): 1115-1120.

隔舱式双脉冲发动机金属膜片设计与实验研究

王伟¹,李江¹,王春光²,田维平³,任全彬²

西北工业大学燃烧、热结构和内流场重点实验室,陕西西安 710072;西北工业大学燃烧、热结构和内流场重点实验室,陕西西安 710072;西安航天动力技术研究所,陕西西安 710025;中国航天科技集团公司第四研究院,陕西西安 710025;西安航天动力技术研究所,陕西西安 710025

发布日期:2021-08-15
作者简介:王伟(1983—),男,博士生,研究领域为航空宇航推进理论与工程。E-mail:midule@mail.nwpu.edu.cn

Study on Metal Diaphragm of Pulse Separation Device in Dual-Pulse Solid Rocket Motor

Science and Technology on Combustion, Internal Flow and Thermal-Structure Laboratory, Northwestern Polytechnical University, Xi’an 710072, China;Science and Technology on Combustion, Internal Flow and Thermal-Structure Laboratory, Northwestern Polytechnical University, Xi’an 710072, China;Xi’an Institute of Aerospace Propulsion, Xi’an 710025, China;The Fourth Academy of CASC, Xi’an 710025, China;Xi’an Institute of Aerospace Propulsion, Xi’an 710025, China

Published:2021-08-15

摘要/Abstract

摘要： 为得到双脉冲发动机隔舱结构关键部件金属膜片适宜结构,通过圆板大挠度理论和断裂力学理论推导出金属膜片预制缺陷处应力强度因子计算公式,得到金属膜片在内压作用下的设计方法,建立了膜片破坏压强与结构尺寸之间定量关系,并通过6次膜片动态破坏单项实验验证了其正确性。在此基础上,利用缩比发动机分别开展了隔舱热流承压、热流打开、热流联合实验以进一步考核隔舱的工作特性。结果表明:所导出的金属膜片设计方法与实验结果较为一致,平均误差约4.394%,可以用于脉冲发动机膜片具体结构尺寸设计；隔舱承压、密封、打开、消融性能良好,可以较好满足双脉冲发动机使用要求。 

关键词: 实验研究;设计方法;金属膜片;隔舱结构;双脉冲发动机 

Abstract: Circular plates with large deflection and fracture mechanics theory were employed to investigate calculating formula of stress intensity factor of prefab gap at the condition of inner pressure, and the relationship between the opening pressure and physical dimension of hard pulse separation device (PSD) in order to achieve the feasible configuration of metal diaphragm, which plays the important role in dual-pulse solid rocket motor. Moreover, six monomial tests of metal diaphragm were conducted to validate the computing precision of designing formula. In addition, three kinds of scale experiments, namely, the compressive, opening and associated test, were performed to explore working characters of pulse separation device. The results indicate that the error between the experimental conclusions and designing results is 4.394% and the method can be applied to confirm the physical dimension of metal diaphragm.The performances of bearing capacity,seal,working characters and ablation are demonstrated and the PSD agrees well with the requirements. 

Key words: Experimental investigation; Designing method; Metal diaphragm; Pulse separation device; Dual-pulse motor

王伟,李江,王春光,田维平,任全彬. 隔舱式双脉冲发动机金属膜片设计与实验研究[J]. 推进技术, 2013, 34(8): 1115-1120.

WANG Wei¹, LI Jiang¹, WANG Chun-guang², TIAN Wei-ping³, REN Quan-bin². Study on Metal Diaphragm of Pulse Separation Device in Dual-Pulse Solid Rocket Motor[J]. Journal of Propulsion Technology, 2013, 34(8): 1115-1120.

参考文献

[1] 叶定友, 王敬超.固体发动机多次启动技术及应用[J].推进技术, 1989,10(4):71-74.(YE Ding-you, WANG Jing-chao, Investigation and Application Analysis of Multi-Start Technology in Solid Rocket Motor [J].Journal of Propulsion Technology, 1989,10(4):71-74)
[2] 王春光, 田维平, 杨德敏, 等.脉冲发动机中隔层传热炭化模型[J].推进技术, 2012,3(2):259-262.(WANG Chuan-guang, TIAN Wei-ping, YANG De-min, et al.Charring Model of Heat Transfer to Pulse Separation Device of Pulse Motor[J].Journal of Propulsion Technology, 2012,3(2):259-262.)
[3] 王春光, 刘洪超, 杨德敏.脉冲发动机隔离装置发展现状研究[J].航空兵器, 2012,(5):48-51.
[4] Wang C G, Liu H C,Yang D M.Study of Development Status and Future Development Proposals for Pulse Solid Rocket Motor[J].Applied Mechanics and Materials, 2012,(110-116):2354-2358.
[5] Naumann K W,Stadler L, Trouillot P, et al.Double-Pulse Solid Rocket Motor Technology Application and Technical Solutions[R].AIAA 2006-4761.
[6] 王长辉, 刘亚冰, 林震, 等.脉冲发动机陶瓷隔板的设计和试验研究[J].固体火箭技术, 2010,3(3):327-331.
[7] 刘亚冰, 王长辉, 刘宇, 等.双脉冲固体发动机隔板预紧载荷数值分析[J].固体火箭技术, 2010,3(5):573-577.
[8] 刘雨, 利凤祥, 李越森, 等.多脉冲固体火箭发动机陶瓷舱盖结构分析[J].固体火箭技术, 2008,1(2):179-183.
[9] 朱卫兵, 张永飞, 陈宏.双脉冲发动机内流场研究[J].弹箭与制导学报, 2012,2(01):114-118.
[10] 孙娜, 娄永春, 孙长宏.某双脉冲发动机燃烧室两相流场数值模拟[J].固体火箭技术, 2010,5(03):335-338.
[11] 刘世东, 张辉, 杨小良.脉冲发动机级间隔离技术研究[J].航空兵器, 2011,(4):55-57.
[12] 张跃峰, 房雷, 莫展, 等.一种用于脉冲发动机的级间隔离装置设计[J].航空兵器, 2012,(2):40-43.
[13] 王心清.结构设计[M].北京:宇航出版社, 1994.
[14] 休泽尔D K, 黄D.液体火箭发动机现代工程设计[M].朱宁昌, 葛李虎, 张民庆等译.北京:中国宇航出版社, 2003.
[15] 王春光, 任全彬, 田维平, 等.脉冲发动机中金属膜片式隔舱动态破坏过程研究[J].固体火箭技术, 2013,6(01):22-26.
[16] 王仁东.断裂力学理论和应用[M].北京:化学工业出版社, 1984.
[17] 刘鸿文.板壳理论[M].杭州:浙江大学出版社, 1987.
[18] Tian W P, Wang C G, Chen C.Numerical Analysis and Test Research on Work Process of PSD in Pulse Solid Rocket Motor [J].Advanced Materials Research,2012,(490-495):2290-2294.