基于原位拉伸的推进剂/衬层界面力学性能研究

推进技术 ›› 2014, Vol. 35 ›› Issue (1): 115-122.

基于原位拉伸的推进剂/衬层界面力学性能研究

邱欣¹,李高春²,丁彪¹,曹名川¹

海军航空工程学院研究生管理大队,山东烟台 264001;海军航空工程学院飞行器工程系,山东烟台 264001;海军航空工程学院研究生管理大队,山东烟台 264001;海军航空工程学院研究生管理大队,山东烟台 264001

发布日期:2021-08-15
作者简介:邱欣(1985—),男,博士生,研究领域为固体火箭发动机寿命预估。E-mail:qiuqiulizh2012@sina.com
基金资助:
武器装备预研基金项目(9140A280102)。

Study on Propellant/Liner Interface Mechanical Property Using In-Situ Tensile Method

Graduate Management Team, Naval Aeronautical Engineering Institute,Yantai 264001,China;Department of Aircraft Engineering, Naval Aeronautical Engineering Institute,Yantai 264001,China;Graduate Management Team, Naval Aeronautical Engineering Institute,Yantai 264001,China;Graduate Management Team, Naval Aeronautical Engineering Institute,Yantai 264001,China

Published:2021-08-15

摘要/Abstract

摘要： 为了解释某种HTPB复合固体推进剂/衬层粘接试件载荷-位移曲线的“双峰”特征,设计了一种基于推进剂/衬层微型试件的原位拉伸试验方法,根据界面细观破坏形态与载荷变化过程,提出了界面处颗粒脱湿及基体断裂过程分别对应两个载荷峰的假设。采用改进的并联Maxwell元件模型对界面断裂行为进行了模拟计算,重现了断裂过程的载荷-位移曲线的“双峰”特征,验证了假设的合理性。通过模拟计算实测曲线,给出了推进剂基体与颗粒之间的近似粘接强度等参数,为推进剂/衬层粘接系统细观材料参数计算方法提供了一种参考。 

关键词: 粘接界面;原位拉伸;失效模式;细观力学 

Abstract: In order to explain a double peak feature of an HTPB composite solid propellant/liner specimen load-displacement curve, an in-situ tensile method based on a kind of miniature specimen was devised. According to the microscopic fracture process and tensile curves of miniature specimens, a hypothesis was proposed that, the dewetting of granulated filler along the interface and breaking of the binder caused the double peak feature. By simulating the fracture process of propellant/liner interface with improved parallel Maxwell model method, the load-displacement curve with double peak feature was regenerated, which verified the rationality of the hypothesis. By simulating the test curve, several micro mechanical parameters such as the approximate strength of particle-binder interface strength was given, which provided a referable method to compute the micro mechanical parameter of propellant/liner adhesive system. 

Key words: Adhesive interface; In-situ tensile; Fracture mode; Mesoscopic mechanism

邱欣,李高春,丁彪,曹名川. 基于原位拉伸的推进剂/衬层界面力学性能研究[J]. 推进技术, 2014, 35(1): 115-122.

QIU Xin,LI Gao-chun,DING Biao,CAO Ming-chuan. Study on Propellant/Liner Interface Mechanical Property Using In-Situ Tensile Method[J]. Journal of Propulsion Technology, 2014, 35(1): 115-122.

参考文献

[1] 邢耀国, 金广文, 许学春, 等.某型固体火箭发动机综合性能试验与寿命评估[J].推进技术, 2004,5(2):176-179.(XING Yao-guo, JIN Guang-wen, XU Xue-chun, et al.Comprehensive Property Tests and Service Life Evaluation for Solid Rocket Motors[J].Journal of Propulsion Technology, 2004,5(2):176-179.)
[2] Bills K W, Svob G J,Plank R W, et al.A Cumulative-Damage Concept for Propellant-Liner Bonds in Solid Rocket Motors[J].Journal of Spacecraft, 1965,3(3):408-412.
[3] 李晓光, 阳建红.丁羟推进剂/衬层界面材料力学性能研究[J].化学推进剂与高分子材料, 2007,5(6):52-55.
[4] 陈刚,王小英,张雪.未老化NEPE推进剂/衬层粘接试件拉伸失效模式研究[J].固体火箭技术,2012,5(6):787-791.
[5] 李高春, 刘祝卿, 唐波, 等.基于数字图像相关方法的粘接界面细观破坏分析 [J].宇航材料工艺, 2012, (3):82-85.
[6] 杨庆生, 杨卫.强韧化材料的细观力学设计[J].力学进展, 1997,7(2):177-184.
[7] 常新龙, 余堰峰, 张有宏, 等.HTPB推进剂老化断裂性能试验[J].推进技术, 2011,2(4):564-568.(CHANG Xin-long, YU Yan-feng, ZHANG You-hong,et al.Test on Aging Fracture Properties of HTPB Propellant[J].Journal of Propulsion Technology, 2011,2(4):564-568.)
[8] Kai Frode Grythe, Finn Knut, Torbjorn Olsen Hansen.Adhesion in Solid Propellant Rocket Motors[J].The Journal of Adhesion, 2007,3:223-254.
[9] Liu C T.2302MI Fracture Mechanics and Service Life Prediction Research[R].ADA409500,9.
[10] 刘祝卿, 李高春, 邢耀国, 等.复合固体推进剂细观损伤扫描电镜实验及数值模拟[J].推进技术, 2011,2(3):412-416.(LIU Zhu-Qing, LI Gao-chun, XING Yao-guo, et al.Numerical Simulation and SEM Study on the Microstructural Damage of Composite Solid Propellants[J].Journal of Propulsion Technology,2011,2(3):412-416.)
[11] 常武军, 鞠玉涛, 王蓬勃.HTPB推进剂脱湿与力学性能的相关性研究[J].兵工学报,2012,3(3):261-266.
[12] 邱欣, 李高春, 邢耀国.HTPB推进剂与衬层界面破坏过程试验研究[J].兵工学报, 2013,4(1):66-71.
[13] 李高春,邢耀国,戢治洪,等.复合固体推进剂细观界面脱粘有限元分析[J].复合材料学报,2011,28(3):229-235.
[14] 杜善义,王彪.复合材料细观力学[M].北京:科学出版社,1998:343-353.
[15] 李高春, 邢耀国, 王玉峰, 等.基于细观力学的复合固体推进剂模量预估方法[J].推进技术, 2007,8(4):441-444.( LI Gao-chun, XING Yao-guo, WANG Yu-feng, et al.A Micro Mechanical Method of the Effective Modulus Estimation for the Composite Propellant[J].Journal of Propulsion Technology, 2007,8(4) :441-444.)
[16] 常武军, 鞠玉涛, 胡少青.HTPB固化胶片的超弹性本构模型[J].推进技术, 2012,3(5):795-798.(CHANG Wu-jun, JU Yu-tao, HU Shao-qing.Research on Hyper Elastic Constitutive Model for HTPB Cross Linked Specimen[J].Journal of Propulsion Technology,2012,3(5):795-798.)