基于光强测量毛细超高压水射流集束性的实验研究

推进技术 ›› 2014, Vol. 35 ›› Issue (1): 87-92.

基于光强测量毛细超高压水射流集束性的实验研究

杨敏官, 龚辰, 王育立, 陆金刚

江苏大学能源与动力工程学院,江苏镇江 212013;江苏大学能源与动力工程学院,江苏镇江 212013;江苏大学能源与动力工程学院,江苏镇江 212013;江苏大学能源与动力工程学院,江苏镇江 212013

发布日期:2021-08-15
作者简介:杨敏官(1952—),男,教授,博士,研究领域为流体机械的性能、内流分析及实验技术。 E-mail:gcld33@163.com
基金资助:
国家自然科学基金项目(51176065)；江苏省研究生科研创新基金项目(CXZZ110567)。

Experimental Study of Ultra-High Pressure Capillary Water Jet Based on Image Intensity

School of Energy and Power Engineering, Jiangsu University, Zhenjiang 212013, China;School of Energy and Power Engineering, Jiangsu University, Zhenjiang 212013, China;School of Energy and Power Engineering, Jiangsu University, Zhenjiang 212013, China;School of Energy and Power Engineering, Jiangsu University, Zhenjiang 212013, China

Published:2021-08-15

摘要/Abstract

摘要： 准确划分射流集束段和雾化段是研究射流集束性的前提。设计了一种基于光强定量测量集束性的方法。基于该方法对具有尖锐边缘孔口和类流线型出口流道的喷嘴,在超高压喷射条件下形成的水射流结构形态进行分析,并与直柱型出口流道喷嘴射流对比分析。结果表明:光强测量法能够比较准确地划分射流集束段和雾化段,区分雾化段中核心区和气液混合区；毛细超高压水射流的集束性在雷诺数影响下由喷嘴孔口结构、出口流道结构的综合作用决定；在一定雷诺数范围内,具有尖锐边缘孔口和类流线型出口流道的喷嘴有良好的集束性,当雷诺数达到1.8×10⁴~1.9×10⁴时,射流集束段长度趋于恒定；喷嘴出口流道结构通过气流调节,对射流集束性的影响在高雷诺数下可以忽略,空气动力扰动在高雷诺数下对射流集束性影响程度显著降低。 

关键词: 超高压水射流;喷嘴结构;湍流;光学测量 

Abstract: In order to study the fluidic beam concentration (FBC) of ultra-high pressure water jet, its intact section and mixture section should be distinguished firstly. A method was developed so that FBC could be measured through images of jets. The experimental nozzle has a sharp-edge orifice and a streamline like exit structure. The jet configuration study under ultra-high pressure based on intensity analysis was presented and was compared with the jets whose nozzle has a right circular cylinder exit structure. The results show that the present method can recognize the intact section and atomization section of the water jets and it can distinguish the core part and the mixture part within the atomization section based on light intensity. The FBC of ultra-high pressure water jet was determined by the Reynolds numbers and the structure of orifice and exit. The water jets from the nozzle with sharp-edge orifice and streamline like exit structure have better FBC within limits, and the FBC of water jets will no longer change when the Reynolds number is over a certain range (18000～19000). The effects of air regulation by exit structure on the FBC are not significant when the Reynolds number is large enough. The jet FBC affected by aerodynamic disturbance will decrease under large Reynolds numbers. 

Key words: Ultra-high pressure water jet; Nozzle configuration; Turbulence; Optical measurement

杨敏官,龚辰,王育立,陆金刚. 基于光强测量毛细超高压水射流集束性的实验研究[J]. 推进技术, 2014, 35(1): 87-92.

YANG Min-guan,GONG Chen,WANG Yu-li,LU Jin-gang. Experimental Study of Ultra-High Pressure Capillary Water Jet Based on Image Intensity[J]. Journal of Propulsion Technology, 2014, 35(1): 87-92.

参考文献

[1] 洪流,池保华,李龙飞,等.模拟空间环境下射流雾化特性实验[J].推进技术, 2012,3(5):765-770.(HONG Liu, CHI Bao-hua, LI Long-fei, et al.Experimental Study on Atomization Characteristics of Liquid Injection in Simulated Space Environment[J].Journal of Propulsion Technology, 2012,3(5):765-770.)
[2] 周磊,解茂昭,贾明,等.高压燃油喷雾雾化与蒸发过程的大涡模拟[J].内燃机学报,2010,8(3).
[3] 王雄辉,黄勇,王方,等.横向气流中液体射流袋式破碎机理[J].推进技术,2012,3(2):198-204.(WANG Xiong-hui, HUANG Yong, WANG Fang, et al.Bag Breakup of Round Liquid Jets in Crossflow[J].Journal of Propulsion Technology, 2012,3(2):198-204.)
[4] Shinjo J, Umemura A.Simulation of Liquid Jet Primary Breakup:Dynamics of Ligament and Droplet Formation[J].International Journal of Multiphase Flow, 2010,6(7):513-532.
[5] Portillo J E, Collicott S H, Blaisdell G A.Measurements of Axial Instability Waves in the Near Exit Region of a High Speed Liquid Jet[J].Physics of Fluid, 2011,3(12):1-13.
[6] 冯守义,牛志刚,费立群,等.高密度烃燃料雾化特性试验[J].推进技术,2011,2(4):512-519.(FENG Shou-yi, NIU Zhi-gang, FEI Li-qun, et al.Experiment on Atomization Characteristics of High Density Hydrocarbon[J].Journal of Propulsion Technology, 2011,2(4):512-519.)
[7] Lin S P, Reitz R D.Drop and Spray Formation from a Liquid Jet[J].Annual Review of Fluid Mechanics, 1998,0:85-105.
[8] Yang F C.The Effect of Orifice Lead Cutting Edge Distance and Fluid Viscosity on Jet Performance in High-Velocity Waterjet Cutting Systems[J].International Journal of Advanced Manufacturing Technology,2009,0(3).
[9] 王长园,刘福水,吴文峰.高压甲烷气体碰壁射流扩散与卷吸特性的试验[J].内燃机学报,2012,30(5).
[10] 周乃君,杨晓力,邢志海,等.高压共轨燃油喷射雾化特性的数值预报[J].中南大学学报(自然科学版),2012,43(10):4063-4067.
[11] 赵陆明,何旭,郑亮,等.高喷射压力下生物柴油喷雾特性试验与仿真[J].农业机械学报,2012,43(9).
[12] 贾丽冬,姚春德,侯亚帮,等.甲醇低压喷射射流特征试验[J].机械工程学报,2012,48(20):153-158.
[13] 赵琳,范玮,范珍涔,等.低压环境下过热流体喷雾特性实验[J].推进技术,2012,33(5):771-778.(ZHAO Lin, FAN Wei, FAN Zhen-cen, et al.Experimental Investigation on Spray Characteristics from Superheated Liquid Jets under Low Pressure[J].Journal of Propulsion Technology, 2012,3(5):771-778.)
[14] Wang Yu-li, YANG Min-guan, GAO Bo.Effect of Interfacial Flow on the Coherency of Ultra-High Speed Water Jet in Air[C].USA:ASME-JSME-KSME Joint Fluids Engineering Conference, 2011.
[15] Vahedi Tafreshi H, Pourdeyhimi B.Simulation of Cavitation and Hydraulic Flip Inside Hydroentangling Nozzles[J].Textile Research Journal, 2004,4(4).
[16] Tafreshi H V, Pourdeyhimi B.The Effects of Nozzle Geometry on Waterjet Breakup at High Reynolds Numbers[J].Experiments in fluids, 2003,5(4):364-371.
[17] Wang Yu-li, YANG Min-guan, KANG Can, et al.Optimization Design of Water Jet Cutting Head Based on CFD Simulation and Experimental Study [C].USA:Proceedings of the 9th Pacific Rim International Conference on Water Jetting Technology, 2009.