多孔陶瓷氢气发汗冷却特性研究 *

推进技术 ›› 2014, Vol. 35 ›› Issue (10): 1387-1391.

多孔陶瓷氢气发汗冷却特性研究 *

李　青¹,孙纪国²

贵州理工学院理学院，贵州贵阳 550003;北京航空航天大学宇航学院，北京 100191

发布日期:2021-08-15
作者简介:李　青(1967—)，男，硕士，副教授，研究领域为热能动力设备与应用领域教学与科研工作。

Experimental Investigation of Transpiration Cooling Through Porous Ceramics Using Hydrogen

School of Science，Guizhou Institute of Technology，Guiyang 550003，China;School of Astronautics，Beihang University，Beijing 100191，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究复合材料微孔发汗冷却热防护技术，研究了冷冻浇注成型工艺定向直孔道碳化硅多孔陶瓷在高压高热流密度时氢气的发汗冷却特性。用电弧加热主流空气产生高温燃气、氢气发汗冷却对多孔陶瓷材料进行了13次热试验研究。试验的材料孔隙率为10～28%，燃烧室压力为3.6～7.9MPa，冷却氢气注入率为0.008～0.021。试验表明，当多孔陶瓷材料氢发汗冷却的注入率为1%时，主流高温燃气与微孔壁面之间的换热减少了30%以上。多孔陶瓷材料氢发汗冷却可以有效减小壁面与燃气之间的对流热流。研究得出了陶瓷多孔材料在高压大热流环境下用氢气发汗冷却的性能关联式。

关键词: 陶瓷多孔材料；发汗冷却；氢气；传热

Abstract: In order to investigate porous ceramics transpiration cooling performance and potentials using hydrogen as coolant at high pressure and high heat flux，a model chamber was designed and fabricated by reaction bonded SiC with radial directed pore by freeze-casting，which has well oriented pore structure green bodies obtained from a slurry. All the tests were executed in an air arc-heater. Totally 13 hot tests were carried out with 10～28% media porosity，at 3.6～7.9MPa chamber pressure and blowing ratio about 0.008～0.021. The results indicate a significant reduction of heat transfer rate through porous ceramics by hydrogen transpiration cooling. For a blowing ratio of 1%，the local heat transfer coefficient was reduced by about 30% relative to the heat transfer coefficient with no blowing. Some empirical correlations are modified.

Key words: Porous ceramics；Transpiration cooling；Hydrogen；Heat transfer

李　青,孙纪国. 多孔陶瓷氢气发汗冷却特性研究 *[J]. 推进技术, 2014, 35(10): 1387-1391.

LI Qing¹,SUN Ji-guO². Experimental Investigation of Transpiration Cooling Through Porous Ceramics Using Hydrogen[J]. Journal of Propulsion Technology, 2014, 35(10): 1387-1391.

参考文献

[1] Yanovske L S. Physical Basis of Transpiration Cooling for Engines of Flying Apparatus[M].Moscow: MAI Press, 1996.
[2] Mueggenburg H H, Hidahl J W, Kessler E L. Platelet Actively Cooled Thermal Management Devices[R].AIAA 92-3127.
[3] Terry J E, Caras G J. Transpiration and Film Cooling of Liquid Rocket Nozzles[R].AD-486409, 1966.
[4] Haeseler D, Mading C, Rubinskiy V, et al. Experimental Investigation of Transpiration Cooled Hydrogen-Oxygen Subscale Chambers[R].AIAA 98-3664.
[5] Serbest E, Haidn O, Hald H, et al. Effusion Cooling in Rocket Combustors Applying Fiber Reinforced Ceramics[R].AIAA 99-2911.
[6] Bartle E R, Leadon B M. The Effectiveness as a Universal Measure of Mass Transfer Cooling for a Turbulent Boundary Layer[C].California: Proceedings of the 1962 Heat Transfer and Fluid Mechanics Institute, Stanford University Press, 1962.
[7] Kays W M, Crawford M E. Convective Heat and Mass Transfer[M].New York: McGraw-Hill Inc., 1993.
[8] Rannie W D. A Simplified Theory of Porous Wall Cooling[M].Pasadena: Jet Propulsion Laboratory California Institute of Technology, 1947.
[9] Laganelli L. Comparison between Film Cooling and Transpiration Cooling System in High Speed Flow[R].AIAA 70-153.
[10] Wheeler H L, Duwez P. Heat Transfer Through Sweat Cooled Porous Tubes[J].Jet Propulsion, 1955, 25(1).
[11] Chen F, Bowman W J, Bowersox R. Effect of Transpiration Cooling on Nozzle Heat Transfer[J].J.Spacecraft, 1995, 33(3): 453-455 .
[12] Meinert J, Huhn J, Serbest E, et al. Turbulent Boundary Layers with Foreign Gas Transpiration[J].J.of Spacecraft and Rockets, 2001, 38(2).
[13] Lezuo M, Haidn O J. Transpiration Cooling in H2/O₂-Combustion Devices[R]. AIAA 96-2581.
[14] Frohlke K, Haidn O, Serbest E. New Experimental Results on Transpiration Cooling for H2/O₂ Rocket Combustion Chambers[R]. AIAA 98-3443.
[15] May L R, Burkhardt W M. Transpiration Cooled Throat for Hydrocarbon Rocket Engines[R].AD-A244255, 1991.
[16] Greuel D, Herbertz A, Haidn O J, et al. Transpiration Cooling Applied to C/C Liners of Cryogenic Liquid Rocket Engines[R]. AIAA 2004-3682.
[17] Tang J, Chen Y F, Sun J G, et al. Properties and Application of Oriented Porous SiC as Transpiration Cooling Materials[C]. Chengdu: The 4th China International Conference on High Performance Ceramics, 2005.
[18] Keener D, Lenertz J, Bowersox R, et al. Transpiration Cooling Effects on Nozzle Heat Transfer and Performance[J]. J.of Spacecraft and Rockets, 1995, 32(6).(编辑:梅瑛) 　　　　　　　　　　　　　*　收稿日期:2013-10-15；修订日期:2014-03-26。作者简介:李青(1967—),男,硕士,副教授,研究领域为热能动力设备与应用领域教学与科研工作。E-mail:gylq206@sina.com