航空发动机管路系统流动与换热的仿真平台

推进技术 ›› 2014, Vol. 35 ›› Issue (11): 1523-1529.

航空发动机管路系统流动与换热的仿真平台

朱鹏飞,刘振侠,任国哲,吕亚国,钟　冲

西北工业大学动力与能源学院，陕西西安 710072;西北工业大学动力与能源学院，陕西西安 710072;西北工业大学动力与能源学院，陕西西安 710072;西北工业大学动力与能源学院，陕西西安 710072;西北工业大学动力与能源学院，陕西西安 710072

发布日期:2021-08-15
作者简介:朱鹏飞(1988—)，男，博士生，研究领域为航空发动机润滑系统与空气系数。

Simulation Platform of Aero-Engine Pipeline System on Flow and Heat Transfer

School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China;School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China;School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China;School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China;School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China

Published:2021-08-15

摘要/Abstract

摘要： 为分析航空发动管路系统流动与换热特性，研究管路流动与内部结构间的热流耦合问题，利用MATLAB/Simulink建模仿真工具包，开发了航空发动机管路系统通用仿真模块库，构建了管路系统特性分析平台。基于该仿真平台，建立了航空发动机管路系统流动计算模型和热流耦合计算模型。输入边界条件后运行仿真，得到了管路系统流体的压力、温度和流量，以及内部结构各节点的温度。计算结果与商业软件Flowmaster的计算值非常接近，并且流量、压力的仿真结果与试验值的相对误差保持在6.5%以下。利用该仿真平台能搭建较高精度的系统网络模型，提高系统建模效率，可应用于发动机管路系统的设计、改进等方面。

关键词: 管路系统；流动与换热；热流耦合；通用仿真模块库

Abstract: In order to analyze the flow and heat transfer characteristics，the heat-fluid coupling of aero-engine pipeline system was investigated. A general simulation block library was developed and a characteristic analysis platform of aero-engine pipeline system was constructed through the simulation tool box Simulink of MATLAB. Based on the simulation platform the calculation model of flow and heat-fluid coupling was established. The fluid pressure，mass flow rate and temperature，and node temperature of internal structure in pipeline system could be achieved. The results of the calculation are in accordance with the Flowmaster calculation results. Comparison between experimental data with calculated values shows that the relative error of pressure and mass flow rate is less than 6.5%. The network model with a high accuracy can be built by using the simulation platform，which improves the modeling efficiency and could be applied to the design，modification of aero-engine pipeline system.

Key words: Pipeline system；Flow and heat transfer；Heat-fluid coupling；General simulation block library

朱鹏飞,刘振侠,任国哲,吕亚国,钟　冲. 航空发动机管路系统流动与换热的仿真平台[J]. 推进技术, 2014, 35(11): 1523-1529.

ZHU Peng-fei,LIU Zhen-xia,REN Guo-zhe,LU Ya-guo,ZHONG Chong. Simulation Platform of Aero-Engine Pipeline System on Flow and Heat Transfer[J]. Journal of Propulsion Technology, 2014, 35(11): 1523-1529.

参考文献

[1] 林基恕. 航空燃气涡轮发动机机械系统设计[M]. 北京: 航空工业出版社, 2005.
[2] 杜马钦柯H T, 克拉维茨 A C. 燃气涡轮发动机的滑油系统[M]. 毛可久译. 北京: 国防工业出版社, 1978.
[3] 岳阳, 梁新刚, 徐向华, 等. 柴油发动机润滑系统流动与换热仿真研究[J]. 工程热物理学报, 2012, 33(8): 1411-1414.
[4] McAmis R W, Miller J T. Modeling Fluid Flow Networks[R]. AIAA 96-3120.
[5] 刘振侠, 黄生勤, 吕亚国, 等. 航空发动机润滑系统通用分析软件开发[J]. 航空动力学报, 2007, 22(1): 12-17.
[6] 吕亚国, 刘振侠, 黄生勤. 航空发动机内流空气系统通用分析软件设计[J]. 计算机仿真, 2009, 26(7): 99-103.
[7] LU Yaguo, LIU Zhenxia, HUANG Shengqin. Numerical Simulation of Areo-Engine Lubrication System[J]. ASME Journal of Engineering for Gas Turbines and Power, 2009, 131(5): 1-4.
[8] Majumdar A K, VanHooser K P. A General Fluid System Simulation Program to Model Secondary Flows Turbomachinery[R]. AIAA 95-2969.
[9] D S Miller. Internal Flow System[M]. Cranfield: BHR Group Limited, 1990.
[10] Joukowsky N. On the Hydraulic Hammer in Water Supply Pipes[J].Proceedings of the American Water Works Association, 1904, 24(3): 341-424.
[11] 张彦光, 压力管道水锤波速影响因素的分析及其对长距离输水管道中水锤计算的影响研究[D]. 西安: 长安大学, 2005.
[12] John H Lienhard. A Heat Transfer Text-Book[M]. Cambridge: Phlogiston Press, 2006.
[13] Ghajar A J, Tam L M. Heat Transfer Measurements and Correlations in the Transition Region for a Circular Tube with Three Different Inlet Configurations[J]. Exp.Thermal and Fluid Science, 1994, 8(1): 79-90.
[14] Churchill S W, Bernstein M. A Correlating Equation for Forced Convection from Gases and Liquids to a Circular Cylinder in Cross Flow[J]. ASME J.Heat Transfer, 1997, 99(1): 300-306.
[15] 吴丁毅. 内流系统的网络计算方法[J]. 航空动力学报, 1996, 17(6): 653-657.(编辑:张荣莉)　　　　　　　　　　　　　　收稿日期:2013-12-12；修订日期:2014-01-07。作者简介:朱鹏飞(1988—),男,博士生,研究领域为航空发动机润滑系统与空气系数。E-mail:pfzhu221@163.com