LHT-100霍尔推力器热特性模拟分析 *

推进技术 ›› 2014, Vol. 35 ›› Issue (12): 1715-1721.

LHT-100霍尔推力器热特性模拟分析 *

孙明明,顾　左,马永斌,丁　汀,龙建飞

兰州空间技术物理研究所真空低温技术与物理国家级重点实验室，甘肃兰州 730000,兰州空间技术物理研究所真空低温技术与物理国家级重点实验室，甘肃兰州 730000,兰州空间技术物理研究所真空低温技术与物理国家级重点实验室，甘肃兰州 730000,兰州空间技术物理研究所真空低温技术与物理国家级重点实验室，甘肃兰州 730000,兰州空间技术物理研究所真空低温技术与物理国家级重点实验室，甘肃兰州 730000

发布日期:2021-08-15
作者简介:孙明明(1985—)，男，博士，工程师，研究领域为空间电推进技术。

Thermal Analysis of a LHT-100 Hall Thruster

National Key Laboratory of Vacuum and Cryogenic Technology on Physics，Lanzhou Institute of Physics，Lanzhou 730000，China,National Key Laboratory of Vacuum and Cryogenic Technology on Physics，Lanzhou Institute of Physics，Lanzhou 730000，China,National Key Laboratory of Vacuum and Cryogenic Technology on Physics，Lanzhou Institute of Physics，Lanzhou 730000，China,National Key Laboratory of Vacuum and Cryogenic Technology on Physics，Lanzhou Institute of Physics，Lanzhou 730000，China and National Key Laboratory of Vacuum and Cryogenic Technology on Physics，Lanzhou Institute of Physics，Lanzhou 730000，China

Published:2021-08-15

摘要/Abstract

摘要： 为了对LHT-100霍尔推力器提出热设计优化措施，采用有限元仿真软件进行LHT-100霍尔推力器的稳态、瞬态及空间在轨环境模拟热分析研究，并通过热平衡试验进行了结果比对。分析及试验结果表明，处于工作状态时霍尔推力器的高温部件主要是放电腔、阳极和导磁底座，而受高温影响薄弱部件内线圈、气路组件的温度则分别达到了约401～421℃和141～381℃。热设计优化建议为，在放电腔与内线圈之间增加独立热屏结构后可以有效降低内线圈温度约80～90℃，在阳极气路组件上存在的热应力会是影响霍尔推力器可靠性的重要因素，需要在热设计中得到充分考虑。

关键词: 霍尔推力器；热分析；热设计；温度分布

Abstract: :In order to optimize thermal design of a LHT-100 Hall thruster，the thermal behaviour of a LHT-100 Hall thruster was described. Warm-up time，steady-state temperature distribution and space environment simulation for the thruster were simulated by the finite element analysis software. The simulation results were compared with thermal-balance experiment results，which show the high temperature components are discharge chamber，anode and magnetizer，and the thermal weakness components include inner circuitry and anode insulation parts，whose temperature are up to 401～421℃ and 141～381℃. Thermal design optimization measures suggest that increasing heat shield between discharge chamber and inner circuitry will reduce the inner circuitry temperature about 80～90℃，and thermal deformation occurred in the anode insulation parts is the core factor which influences the reliability of the Hall thruster，which should be considered in thermal design.

Key words: Hall thruster；Thermal analysis；Thermal design；Temperature distribution

孙明明,顾　左,马永斌,丁　汀,龙建飞. LHT-100霍尔推力器热特性模拟分析 *[J]. 推进技术, 2014, 35(12): 1715-1721.

SUN Ming-ming,GU Zuo,MA Yong-bin,DING Ting,LONG Jian-fei. Thermal Analysis of a LHT-100 Hall Thruster[J]. Journal of Propulsion Technology, 2014, 35(12): 1715-1721.

参考文献

[1] 毛根旺, 韩先伟, 杨涓, 等. 电推进研究的技术状态和发展前景[J].推进技术, 2000, 21(5):1-5.(MAO Gen-wang, HAN Xian-wei, YANG Juan, et a1.Research State of Electric Propulsion and Its Development Prospect[J].Journal of Propulsion Technology, 2000, 21(5):1-5.)
[2] 段萍, 沈鸿娟, 刘金远, 等. 霍尔推力器等离子体磁鞘特性[J].推进技术, 2011, 32(6):799-805.(DUAN Ping, SHEN Hong-juan, LIU Jin-yuan, et a1.Characteristics of Magnetized Sheath in Hall Thruster[J].Journal of Propulsion Technology, 2011, 32(6):799-805.)
[3] 廖宏图, 余水淋, 康小录. 霍尔推力器内部等离子体流场数值分析[J].推进技术, 2005, 26(3):270-275.(LIAO Hong-tu, YU Shui-lin, KANG Xiao-lu.Numerical Analysis on Inner Plasma Flow of Hall Effect Thrust[J]. Journal of Propulsion Technology, 2005, 26(3).)
[4] 张天平. 国外离子和霍尔电推进技术最新进展[J].真空与低温, 2006, 12(4):187-193.
[5] Jonathan Van Noord. NEXT ion Thruster Thermal Model[C]. USA: 43rd Joint Propulsion Conference, 2007.
[6] 刘辉, 于达仁. 霍尔推力器的二维粒子模拟研究[C].郑州:中国工程热物理学会传热传质学术会议, 2008.
[7] Dorf L, Raitses Y. Effect of Magnetic Field Profile on the Anode Fall in a Hall-Effect Thruster Discharge[J]. Physics of Plasmas, 2006, 13(5): 97-104.
[8] Barral S, Makowski K. Wall Material Effects in Stationary Plasma Thrusters[J]. Physics of Plasmas, 2003, 10(10): 4137-4152.
[9] Archipov B A, Krochak L Z, Maslennikov N Y. Thermal Design of the Electric Propulsion System Components[R]. AIAA 98-3489.
[10] Pagnon D, Darnon F. Time Resolved Characterization of the Plasma and Plume of a SPT Thruster[R]. AIAA 99-2428.
[11] Roche S, Barral S, Bechu S. Thermal Analysis of a Stationary Plasma Thruster[R]. AIAA 99-2296.
[12] Khartov S, Serovaisky V, Smakhtin A, et al. The Investigation of the Temperature Field in the SPT Structure Elements[R]. IEPC 95-I 74.
[13] Korsun A, Tverdokhlebova E, Gabdullin F. Verification of SSM Hall Thruster Plume Model Considering the Electric Plasma Processes[R]. AIAA 2004-155.
[14] 宁中喜, 于达仁, 魏振磊. 空心阴极加热功率对霍尔推力器性能的影响[C]. 成都:第十三届全国等离子体科学技术会议, 2007.
[15] 孙明明, 顾左, 郭宁, 等. 离子推力器热特性模拟分析[J]. 强激光与粒子束, 2010, 22(5):1149-1152. (编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2013-11-26；修订日期:2013-12-23。作者简介:孙明明(1985—),男,博士,工程师,研究领域为空间电推进技术。E-mail:smmhappy@63.com