基于推阻平衡的喷管型面截短方法研究及试验验证

推进技术 ›› 2014, Vol. 35 ›› Issue (2): 151-156.

基于推阻平衡的喷管型面截短方法研究及试验验证

赵强,徐惊雷,范志鹏

南京航空航天大学能源与动力学院,江苏南京 210016;南京航空航天大学能源与动力学院,江苏南京 210016;南京航空航天大学能源与动力学院,江苏南京 210016

发布日期:2021-08-15
作者简介:赵强(1989—),男,硕士生,研究领域为内流气体动力学。E-mail:chikeeyzq@126.com

Experimental and Numerical Study of Truncation Method for Thrust Nozzle Profile Based on Balance of Thrust and Friction

College of Energy and Power Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;College of Energy and Power Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;College of Energy and Power Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Published:2021-08-15

摘要/Abstract

摘要： 出于减小喷管壁面摩擦损失的考虑以及发动机的整体布局的受制,传统推力喷管设计方法得到的理想喷管通常需要进行适当截短。合理的截短方法有助于保持喷管性能,因此,通过壁面单元受力分析并考虑单元体内的推力与阻力关系,提出了一种推阻平衡的喷管截短设计方法。使用上述方法对一个三次曲线型面的三维原始完全膨胀喷管进行截短,使喷管长度减小25%,重量减小34%。通过风洞试验与数值模拟结果对比发现,截短后的喷管推力系数提高1.5%,升力也得到有效提高,验证了此种截短方法的正确性。截短后喷管处于欠膨胀状态,与理论分析得到的最大静推力状态结果相符。 

关键词: 推力喷管;壁面剪切力;截短;推阻平衡;推力系数 

Abstract: Considering the adverse effects of wall friction and restricted by the overall layout of scramjet, thrust nozzles designed by traditional methods sometimes are too long and need to be truncated. A new truncation method based on the balance of thrust and friction was brought forward. To verify the method, an ideal expansion nozzle with a cubic curve as the expansion profile was designed, and then truncated by the new method. As a result, the length and the weight of the nozzle are reduced by 25% and 34%, respectively. Cold-flow experiment and numerical simulation were conducted on the truncated nozzle, and they fit well. The simulation results show that the thrust coefficient increases by 1.5% and the lift performance increases as well. The truncated nozzle works at under-expanded condition,and the truncation method is fully verified. 

Key words: Thrust nozzle; Shearing stress; Truncation;Thrust friction balance;Thrust coefficient

赵强,徐惊雷,范志鹏. 基于推阻平衡的喷管型面截短方法研究及试验验证[J]. 推进技术, 2014, 35(2): 151-156.

ZHAO Qiang, XU Jing-lei, FAN Zhi-peng. Experimental and Numerical Study of Truncation Method for Thrust Nozzle Profile Based on Balance of Thrust and Friction[J]. Journal of Propulsion Technology, 2014, 35(2): 151-156.

参考文献

[1] 骆晓臣,张堃元.隔离段内超声速流动摩擦阻力分析[J].空气动力学学报,2009,7(1):124-128.
[2] Lederer R,Krüger W.Nozzle Development as a Key Element for Hypersonics[R].AIAA 93-5058.
[3] MacLean M K.Static Internal Performance Tests of Single Expansion Ramp Nozzles Concepts Designde with LO Considerations[R].AIAA 93-2429.
[4] Britton J Olson, Sanjiva K Lele.Low-Frequency Unsteadiness in Nozzle Flow Separation[R].AIAA 2012-2974.
[5] Edwards Clw, Small Wj, Weidner Jp, et al.Studies of Scramjet/Airframe Integ-Ration Techniques for Hypersonic Aircraft[R].AIAA 75-58.
[6] 莫建伟,徐惊雷,全志斌.截短喷管试验与数值模拟研究[J].推进技术, 2012,3(6):940-945.(MO Jian-wei, XU Jing-lei, QUAN Zhi-bing.Experimental and Numerical Study of the Truncated SERN[J].Journal of Propulsion Technology, 2012,3(6):940-945.)
[7] 徐华松,谷良贤.高超声速飞行器后体喷管设计[J].航空动力学报, 2007,2(2):257-260.
[8] Jan Ostland.Flow Processes In Rocket Engine Nozzles With Focus On Flow Separation and Side-Loads[D].Sweden:Royal Institute of Technology Department of Mechanics, 2002.
[9] Hoffman J D.Design of Compressed Truncated Perfect Nozzle[R].AIAA 85-1172.
[10] 全志斌,徐惊雷,莫建伟.SERN膨胀型面的非线性缩短设计[J].推进技术, 2012,3(6):951-955.(QUAN Zhibing, XU Jing-lei, MO Jian-wei.Design of Nonlinearly Compressed Perfect Nozzle Profile[J].Journal of Propulsion Technology, 2012,3(6):951-955.)
[11] Ralf H Stark, Bernd H Wagner.Experimental Flow Investigation of a Truncated Ideal Contour Nozzle[R].AIAA 2006-5208.
[12] 张艳慧.非对称大膨胀比喷管设计及性能分析[D].南京:南京航空航天大学, 2006.
[13] Going M.Nozzle Design Optimization by Method-of-Characteristics[R].AIAA 90-2024.
[14] Tayo Ladeinde, Hsun Chen.Performance Comparison of a Full-Length and a Truncated Aerospike Nozzle[R].AIAA 2010-6593.
[15] Masahiro Takahashi, Shichi Ueda, Takeo Tomita, et al.Transient Flow Simulation of a Compressed Truncated Perfect Nozzle[R].AIAA 2001-3681.
[16] 徐惊雷,张艳慧,张堃元.超燃冲压发动机非对称喷管非设计状态性能计算[J], 推进技术, 2007,8(3):287-290.(XU Jing-lei, ZHANG Yanhui.Numerical Simulation of Single Expansion Ramp Nozzle for Scramjet on the Off-Design Point[J].Journal of Propulsion Technology, 2007,8(3):287-290.)