外流马赫数对逆流推力矢量喷管性能的影响

推进技术 ›› 2014, Vol. 35 ›› Issue (4): 442-448.

外流马赫数对逆流推力矢量喷管性能的影响

刘赵淼,陈川,申峰, 徐迎丽

北京工业大学机械工程与应用电子技术学院,北京 100124;北京工业大学机械工程与应用电子技术学院,北京 100124;北京工业大学机械工程与应用电子技术学院,北京 100124;北京工业大学机械工程与应用电子技术学院,北京 100124

发布日期:2021-08-15
作者简介:刘赵淼(1970—) ,女,博士,教授,研究领域为计算流体力学和微流体力学。 E-mail:lzm@bjut.edu.cn
基金资助:
北京市自然科学基金重点项目(KZ201210005003)。

Impact of Mach Number of External Flow on Performance of Counterflow Thrust Vectoring Nozzle

Beijing University of Technology, College of Mechanical Engineering and Applied Electronics Technology, Beijing 100124, China;Beijing University of Technology, College of Mechanical Engineering and Applied Electronics Technology, Beijing 100124, China;Beijing University of Technology, College of Mechanical Engineering and Applied Electronics Technology, Beijing 100124, China;Beijing University of Technology, College of Mechanical Engineering and Applied Electronics Technology, Beijing 100124, China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究外流马赫数变化对逆流推力矢量喷管内部流场结构和性能特点的影响,参考实验,数值模拟了不同马赫数下的流场结构、喷管矢量角和逆向二次流质量流量系数。结果表明:外流马赫数从0增加到0.8的过程中,喷管内流场结构会随着外流马赫数的增大而不断变化从而改变主流两侧压力差,进而导致矢量角逐渐减小,与此同时二次流质量流量系数快速增大；外流马赫数从0.8增大到1.5的过程中,流场结构和矢量角随马赫数变化没有明显变化,二次流质量流量系数缓慢增大。 

关键词: 逆流推力矢量;外流干扰;马赫数;数值模拟 

Abstract: In order to find the effects of different Ma of the external flow on the performance and structure of internal flow field of counterflow thrust vectoring nozzle, referring to the experiment, numerical simulation was applied to study the flow field, vectoring angle and mass flux ratio of secondary flow under different Ma(0~1.5). The results show that, as the Ma increases from 0to 0.8, the flow filed in the nozzle changes so as to change the difference of pressure across the primary flow, resulting in the vectoring angle decrease, and the mass flux ratio of secondary flow will increase quickly. As the Ma increases from 0.8to 1.5, both the flow filed and the vectoring angle have no change, and the mass flux ratio of secondary flow will increase slowly. 

Key words: Counterflow thrust vectoring; Impact of external flow; Mach number; Numerical simulation

刘赵淼,陈川,申峰,徐迎丽. 外流马赫数对逆流推力矢量喷管性能的影响[J]. 推进技术, 2014, 35(4): 442-448.

LIU Zhao-miao, CHEN Chuan, SHEN Feng, XU Ying-li. Impact of Mach Number of External Flow on Performance of Counterflow Thrust Vectoring Nozzle[J]. Journal of Propulsion Technology, 2014, 35(4): 442-448.

参考文献

[1] Strykowski P J , Krothapalli A .The Countercurrent Mixing Layer:Strategies For Shear Layer Control[R].AIAA 93-3260.
[2] 连永久.射流推力矢量控制技术研究[J].飞机设计, 2008,8(2):19-24.
[3] Deere K A .Summary Of Fluidic Thrust Vectoring Research Conducted at NASA Langley Research Center[R].AIAA 2003-3800.
[4] Krothapalli A , Forliti D J .Thrust Vector Control of Rectangual Jets Using Counterflow[R].AFOSR-TR-95.
[5] Strykowski P J .An Experimental/Modeling Study of Jet Attachment During Counterflow Thrust Vectoring[R].NASA/NAG 1-1736.
[6] Dores D ,Madruga S M ,Krothapalli A ,et al.Characterization of a Counterflow Thrust Vectoring Scheme On A Gas Turbine Engine Exhaust Jet[R].AIAA 2006-3516.
[7] Dores D .Feedback Control For Counterflow Thrust Vectoring with a Turbine Engine:Experiment Design and Robust Control Design and Implementation[D].Tallahassee:College of Engineering, Florida State University,2005.
[8] 杨建军,汪明生.逆流推力矢量喷管基本流动特征的数值研究[J].航空学报,2008,9(4):770-775.
[9] 汪明生,杨建军.几何参数对逆流矢量喷管性能的影响研究[J].火箭推进, 2009,5(2):30-36.
[10] 杨建军.逆流控制的推力矢量喷管气动特性研究[D].南京:南京航空航天大学,2007.
[11] Deere K A .Computational Investigation of The Aerodynamic Effects on Fluidic Thrust Vectoring[R].AIAA 2000-3598.
[12] 刘刚,杨永,李聪,二股流喷射控制推力矢量数值计算研究[J],航空计算技术, 2005,5(2):50-53.
[13] 王占学,李志杰.喷管气动参数对推力矢量影响的数值模拟[J].推进技术,2008,9(2):187-193.(WANG Zhan-xue,LI Zhi-jie.Effect of Aerodynamic Parameters of Main and Secondary Flow Path on Thrust Vetoring[J].Journal of Propulsion Technology,2008,29(2):187-193.)
[14] 邹欣华,王强.不同飞行条件下反流控制矢量喷管的内流特性[J].北京航空航天大学学报,2011,7(2):227-230.
[15] 张群锋,吕志咏,王戈一.轴对称射流矢量喷管的试验和数值模拟[J].推进技术,2004,5(2):140-143.(ZHANG Qun-feng, LU Zhi-yong,WANG Ge-yi.Numerical Simulation of an Axisymmetric Fluidic Vectoring Nozzle[J].Journal of Propulsion Technology,2004,5(2):140-143.