甲烷/空气射流抬举火焰的大涡模拟计算

推进技术 ›› 2014, Vol. 35 ›› Issue (5): 654-660.

甲烷/空气射流抬举火焰的大涡模拟计算

韩超,张培,叶桃红,陈义良

中国科学技术大学热科学与能源工程系，安徽合肥 230027;中国科学技术大学热科学与能源工程系，安徽合肥 230027;中国科学技术大学热科学与能源工程系，安徽合肥 230027;中国科学技术大学热科学与能源工程系，安徽合肥 230027

发布日期:2021-08-15
作者简介:韩超(1992—)，男，硕士生，研究领域为湍流燃烧。E-mail:danielhc@mail.ustc.edu.cn
基金资助:
国家自然科学基金(51176178)，国家自然科学重点基金(50936005)。

Large Eddy Simulation of CH 4 /Air Lifted Flame

Department of Thermal Science and Energy Engineering， University of Science and Technology of China，Hefei 230027， China;Department of Thermal Science and Energy Engineering， University of Science and Technology of China，Hefei 230027， China;Department of Thermal Science and Energy Engineering， University of Science and Technology of China，Hefei 230027， China;Department of Thermal Science and Energy Engineering， University of Science and Technology of China，Hefei 230027， China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究中高温伴流中的自动着火特性，采用大涡模拟(LES)和均匀搅拌器(PSR)结合假定概率密度函数的建表湍流燃烧模型对甲烷/空气射流在高温伴流中的抬举火焰数值研究，并比较反应进度的不同概率密度分布对结果的影响。结果表明，计算结果与实验值符合得较好。PSR建表方法能够捕捉到高温伴流抬举火焰的点火过程，能够正确预测火焰的抬举高度，但在火焰稳定燃烧区域该建库燃烧模型还存在不足。同时，反应进度的亚格子脉动对准确模拟抬举高度十分重要。

关键词: 抬举火焰；大涡模拟；均匀搅拌器；自动着火

Abstract: Large eddy simulation(LES) and tabulated table using perfectly stirred reactor(PSR) combined with presumed probability density function(PDF) combustion model were applied to investigate the lifted flame of CH 4 /air jet in high temperature coflow. The effect of different shapes of PDF for progress variable was investigated. The numerical results indicate that distribution of temperature and mass fractions of major compositions in different relative locations are in good agreement with the experimental data. The method of tabulated table with PSR can capture the auto-ignition process of the flame and the lifted height of the flame，but performs not so good in the stable flame zone. The results also show that the sub-grid variance of the progress variables is essential to predict lifted height correctly.

Key words: Lifted flame；Large eddy simulation；Perfectly stirred reactor；Autoignition

韩超,张培,叶桃红,陈义良. 甲烷/空气射流抬举火焰的大涡模拟计算[J]. 推进技术, 2014, 35(5): 654-660.

HAN Chao,ZHANG Pei,YE Tao-hong,CHEN Yi-liang. Large Eddy Simulation of CH 4 /Air Lifted Flame[J]. Journal of Propulsion Technology, 2014, 35(5): 654-660.

参考文献

[1] Cabra R， Chen J Y， Dibble R W， et al. Lifted Methane–air Jet Flames in a Vitiated Coflow[J]. Combustion and Flame ， 2005， 143(4): 491-506.
[2] Christo F C， Dally B B. Modeling Turbulent Reacting Jets Issuing into a Hot and Diluted Coflow[J]. Combustion and flame ， 2005， 142(1): 117-129.
[3] Ihme M， See Y C. LES Flamelet Modeling of a Three-Stream MILD Combustor: Analysis of Flame Sensitivity to Scalar Inflow Conditions[J]. Proceedings of the Combustion Institute ， 2011， 33(1): 1309-1317.
[4] Bilger R W， Pope S B， Bray K N C， et al. Paradigms in Turbulent Combustion Research[J]. Proceedings of the Combustion Institute ， 2005， 30(1): 21-42.
[5] Pitsch H. Large-Eddy Simulation of Turbulent Combustion[J]. Annual Review of Fluid Mech anics， 2006， 38: 453-482.
[6] Pierce C D， Moin P. A Dynamic Model for Subgrid-Scale Variance and Dissipation Rate of a Conserved Scalar[J]. Physics of Fluids ， 1998， 10.
[7] Pitsch H， Steiner H. Large-Eddy Simulation of a Turbulent Piloted Methane/Air Diffusion Flame (Sandia Flame D)[J]. Physics of Fluids ， 2000， 12.
[8] Jha P K， Groth C P T. Tabulated Chemistry Approaches for Laminar Flames: Evaluation of Flame-Prolongation of ILDM and Flamelet Methods[J]. Combustion Theory and Modelling ， 2012， 16(1): 31-57.
[9] Verhoeven L M， Ramaekers W J S， Van Oijen J A， et al. Modeling Non-Premixed Laminar Co-Flow Flames Using Flamelet-Generated Manifolds[J]. Combustion and Flame ， 2012， 159(1): 230-241.
[10] Domingo P， Vervisch L， Veynante D. Large-Eddy Simulation of a Lifted Methane Jet Flame in a Vitiated Coflow[J]. Combustion and Flame ， 2008， 152(3): 415-432.
[11] Yoo C S， Sankaran R， Chen J H. Three-Dimensional Direct Numerical Simulation of a Turbulent Lifted Hydrogen Jet Flame in Heated Coflow: Flame Stabilization and Structure[J]. Journal of Fluid Mechanics ， 2009， 640(1): 453-481.
[12] Gordon R L， Masri A R， Pope S B， et al. Transport Budgets in Turbulent Lifted Flames of Methane Autoigniting in a Vitiated co-Flow[J]. Combustion and Flame ， 2007， 151(3): 495-511.
[13] Duwig C， Fuchs L. Large Eddy Simulation of a H 2 /N 2 Lifted Flame in a Vitiated Co-Flow[J]. Combustion Science and Technology ， 2008， 180(3): 453-480.
[14] Michel J B， Colin O， Angelberger C， et al. Using the Tabulated Diffusion Flamelet Model ADF-PCM to Simulate a Lifted Methane-Air Jet Flame[J]. Combustion and Flame ， 2009， 156(7): 1318-1331.
[15] Peters N. Laminar Diffusion Flamelet Models in Non-Premixed Turbulent Combustion[J]. Progress in Energy and Combustion Science ， 1984， 10(3): 319-339.
[16] Ihme M， See Y C. Prediction of Autoignition in a Lifted Methane/Air Flame Using an Unsteady Flamelet/Progress Variable Model[J]. Combustion and Flame ， 2010， 157(10): 1850-1862.
[17] Ihme M， Pitsch H. Prediction of Extinction and Rignition in Nonpremixed Turbulent Flames Using a Flamelet/Progress Variable Model: 1. A Priori Study and Presumed PDF Closure[J]. Combustion and Flame ， 2008， 155(1): 70-89.
[18] Poinsot T， Veynante D， Theoretical and Numerical Combustion， [M] Philadelphia : Edwards ， 2001.
[19] Galpin J， Angelberger C， Naudin A， et al. Large-Eddy Simulation of H 2 –Air Auto-Ignition Using Tabulated Detailed Chemistry[J]. Journal of Turbulence ， 2008 (9).1-21.
[20] Ihme M， Pitsch H. Prediction of Extinction and Reignition in Nonpremixed Turbulent Flames Using a Flamelet/Progress Variable Model: 2. Application in LES of Sandia Flames D and E[J]. Combustion and Flame ， 2008， 155(1): 90-107.
[21] Jeong J， Hussain F. On the Identification of a Vortex[J]. Journal of Fluid Mechanics ， 1995， 285(69): 69-94.