双脉冲发动机中金属膜片动态与静态打开对比分析

推进技术 ›› 2014, Vol. 35 ›› Issue (9): 1259-1264.

双脉冲发动机中金属膜片动态与静态打开对比分析

刘伟凯,何国强,王春光

西北工业大学燃烧、热结构和内流场重点实验室，陕西西安 710072;西北工业大学燃烧、热结构和内流场重点实验室，陕西西安 710072;西北工业大学燃烧、热结构和内流场重点实验室，陕西西安 710072

发布日期:2021-08-15
作者简介:刘伟凯(1973—)，男，博士生，研究领域为固体特种发动机总体研究。

Research on Dynamic and Static Opening of Metal Diaphragm

Science and Technology on Combustion，Internal Flow and Thermal-Structure Laboratory，Northwestern Polytechnical University，Xi’an 710072，China;Science and Technology on Combustion，Internal Flow and Thermal-Structure Laboratory，Northwestern Polytechnical University，Xi’an 710072，China;Science and Technology on Combustion，Internal Flow and Thermal-Structure Laboratory，Northwestern Polytechnical University，Xi’an 710072，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究双脉冲发动机中金属膜片的打开特性，分别选取Ductile damage模型和Brittle cracking模型来模拟膜片静态和动态打开过程。数值计算发现膜片分别在3.46MPa静态内压载荷和1.95MPa动态内压载荷作用下打开。为了验证计算结果的有效性，进行了膜片的冷流静态打开和热流动态打开试验，膜片分别在平均3.75MPa静态载荷和平均2.2MPa动态载荷作用下打开，数值计算结果与试验结果一致，说明了数值计算方法的有效性。计算结果和试验结果表明，膜片的静态打开压强明显高于动态打开压强，分析认为是由于膜片的塑性变形、材料本身特性及预制缺陷处的应力松弛引起的。根据隔舱的冷流及热流单项试验可以发现，膜片的打开形式与预期一致，满足双脉冲发动机的使用要求。

关键词: 双脉冲发动机；金属膜片；动态打开；静态打开

Abstract: In order to study the opening property of metal diaphragm in double pulse solid rocket motor，ductile damage model and brittle cracking model were used to simulate the dynamic and static opening process. The simulation static opening pressure was 3.46 MPa and the simulation dynamic opening pressure was 1.95 MPa. To further verify the accuracy of simulation，the verification tests were carried out. The real average static opening pressure was 3.75 MPa and the real average dynamic opening pressure was 2.2 MPa. The computational results agree with the tests results well. The numerical method in this article is effective. The static opening pressure is obviously higher than the dynamic opening pressure，which is considered to be due to the plastic deformation of the diaphragm，the material itself characteristics and stress relaxation of prefabricated defect. It can be found that opening mode of metal diaphragm is in line with expectations in the cold and heat tests，which can satisfy with the design requirements.

Key words: Double pulse motor；Metal diaphragm；Static opening；Dynamic opening

刘伟凯,何国强,王春光. 双脉冲发动机中金属膜片动态与静态打开对比分析[J]. 推进技术, 2014, 35(9): 1259-1264.

LIU Wei-kai,HE Guo-qiang,WANG Chun-guang. Research on Dynamic and Static Opening of Metal Diaphragm[J]. Journal of Propulsion Technology, 2014, 35(9): 1259-1264.

参考文献

[1] Wang Chunguang,Liu Hongchao,Yang Demin.Study of Development Status and Future Development Proposals for Pulse Soild Rocket Motor[J].Applied Mechanics and Materials,2012,(110-116): 2354-2358.
[2] 王春光,刘洪超,杨德敏.脉冲发动机隔离装置发展现状研究[J].航空兵器,2012,(5): 48-52.
[3] 王春光,田维平,任全彬,等.脉冲发动机中隔层工作过程的数值分析及试验[J].推进技术,2012,33(5):790-794.(WANG Chun-guang,TIAN Wei-ping,REN Quan-bin?,et al.Numerical Analysis and Test on Work Process of Pulse Separation Device in Pulse Motor[J].Journal of Propulsion Technology,2012,33(5): 790-794.)
[4] 石瑞,王长辉,苌艳楠.双脉冲固体发动机铝膜隔板设计和试验研究[J].固体火箭技术,2012,36(2) :190-194.
[5] 孙娜,娄永春,孙长宏.某双脉冲发动机燃烧室两相流场数值分析[J].固体火箭技术,2012,35(3) :335-338.
[6] 刘亚冰,王长辉,刘宇.双脉冲发动机燃烧室局部烧蚀特性分析[J].固体火箭技术,2010,33(4) :453-456.
[7] 曹熙炜,刘宇,任军学.内孔隔板脉冲固体火箭发动机流场分析[J].航空动力学报,2011,26(2): 448-452.
[8] 朱卫兵,张永飞,陈宏.双脉冲发动机内流场研究[J].弹箭与制导学报,2012,32(1): 114-118.
[9] 王春光,任全彬,田维平,等.脉冲发动机中金属膜片式隔舱动态破坏过程研究[J].固体火箭技术,2013,36(1): 573-577.
[10] 刘伟凯,惠博.双脉冲发动机中金属膜片式隔舱设计方法[J].固体火箭技术,2013,36(4): 486-490.
[11] 解德,钱勤,李长安.断裂力学中的数值计算方法及工程应用[M].北京: 科学出版社,2009.
[12] 高庆.工程断裂力学[M].重庆: 重庆大学出版社, 1986.(编辑:张荣莉)收稿日期:2013-07-22；修订日期:2013-10-23。作者简介:刘伟凯(1973—),男,博士生,研究领域为固体特种发动机总体研究。E-mail:wakenliu@gmail.com