齿间凸起对直通篦齿封严特性影响的数值研究

推进技术 ›› 2015, Vol. 36 ›› Issue (1): 119-123.

齿间凸起对直通篦齿封严特性影响的数值研究

童　飞¹,张　丽¹,华锐睿¹,陆海鹰²,梁义强²

西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072,中航工业沈阳发动机研究所，辽宁沈阳 110000,中航工业沈阳发动机研究所，辽宁沈阳 110000

发布日期:2021-08-15
作者简介:童　飞(1990—)，男，硕士，研究领域为航空发动机封严技术。

Numerical Investigation of Protrusions on Leakage of Straight-Through Labyrinth Seal

School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,AVIC Shenyang Aircraft Engine Design Institute，Shenyang 110000，China and AVIC Shenyang Aircraft Engine Design Institute，Shenyang 110000，China

Published:2021-08-15

摘要/Abstract

摘要： 为提升篦齿的密封性能，对在齿间光滑衬套上增加矩形凸起的直通篦齿的流动特性进行了数值研究，分析了压比、凸起的尺寸和轴向位置对篦齿泄漏特性的影响。和光滑齿相比，凸起破坏了壁面射流附面层的连续性，改变了流体在齿腔中的流动方向，有效地提高了通道的密封性能，降低了通道的泄漏量。结果表明，当压比为2时，含有凸起结构的篦齿的泄漏系数较光滑齿降低了13%，当压比增加到4时，泄漏系数更是降低了18%；凸起的高度越大宽度越小，凸起对篦齿密封性能的提高就越明显；凸起和下级齿之间的轴向距离越短，凸起对流入下级齿的气体流动方向改变就越大，密封性能也就越好。

关键词: 直通篦齿；密封；衬套；凸起；泄漏系数；数值研究

Abstract: To improve the performance of labyrinth seal，a straight-through labyrinth seal with protrusions on the smooth bush has been numerically investigated. The effects of pressure ratio，protrusions size and the space between teeth and protrusions are studied. Compared with smooth bush straight-through labyrinth seal，protrusions destroy the wall jet boundary layer continuity and change the direction of the jet flow，which improve the seal performance and decrease the mass flow effectively. The study reveals that when the pressure ratio is 2，the leakage coefficient of labyrinth seal with protrusions can decrease by 13% in comparison with smooth bush labyrinth seal，and when the pressure ratio is 4，the leakage coefficient is reduced by 18%. The narrower width and the higher height the protrusions can have，the better seal performance the labyrinth seal can get. Additionally，with a decrease of the axial distance between protrusion and the next tooth，the protrusion can greatly change the direction of the jet which flows into the next tooth，and thus improve the seal performance evidently.

Key words: Straight-through labyrinth seal；Seal；Bush；Protrusion；Leakage coefficient；Numerical investigation

童　飞,张　丽,华锐睿,陆海鹰,梁义强. 齿间凸起对直通篦齿封严特性影响的数值研究[J]. 推进技术, 2015, 36(1): 119-123.

TONG Fei¹,ZHANG Li¹,HUA Rui-rui¹,LU Hai-ying²,LIANG Yi-qiang². Numerical Investigation of Protrusions on Leakage of Straight-Through Labyrinth Seal[J]. Journal of Propulsion Technology, 2015, 36(1): 119-123.

参考文献

[1] 塔鲁达纳夫斯基. 非接触密封[M].李均卿, 刁元康, 译. 北京: 机械工业出版社, 1986.
[2] 刘卫华, 林丽, 朱高涛. 迷宫密封机理的研究现状及其展望[J]. 流体机械, 2007, 35(2):35-39.
[3] Stargess G J. Application of CFD to Gas Turbine Secondary Flow System[R]. AIAA-SS-3203, 1988.
[4] 2002 NASA Seal/Secondary Air System Workshop[R]. NASA/CP-2003-212458.
[5] Steward P A , Brasnett K A.The Contribution of Dynamic X-Ray to Gas Turbine Air Sealing Technology[R].AGARD-CP-237, 1978.
[6] Stocker H L, Cox D M, Holle G F. Aerodynamic Performance of Conventional and Advanced Design Labyrinth Seals with Solid-Smooth, Abradable and Honeycomb Lands[R]. NAS-3-20056, 1977.
[7] Denecke J, Scharm V, Kim S, et al.Influence of Rub-Grooves on Labyrinth Seal Leakage[J].ASME Journal of Turbomachinery, 2003, 125: 387-393.
[8] Nayak K L, Musthafa T, Ansari A.The Effects of Tooth Tip Wear and Its Aixal Displacement in Rub-Grooves on Leakage and Windage Heating of Labyrinth Seals with Honeycomb Lands[R]. AIAA 2007-5736.
[9] Rhode D L, Allen B F. Visualization and Measurements of Rub-Groove Leakage Effects on Straight-Through Labyrinth Seals[R]. ASME 98-GT-506.
[10] Rhode D L, Allen B F. Measurement and Visualization of Leakage Effects of Rounded Teeth Tips and Rub-Grooves on Stepped Labyrinths[J]. Journal of Engineering for Gas Turbines and Power, 2001, 123: 604-611.
[11] Rhode D L, Adams R G. Rub-Groove Width and Depth Effects on Flow Predictions for Straight-Through Labyrinth Seals[J].Journal of Tribology, 2004, 26(1): 781-787.
[12] 纪国剑, 吉洪湖. 直通篦齿静止衬套上磨损槽对泄漏特性影响的数值研究[J].航空动力学报, 2008, 23(8): 1403-1408.
[13] 纪国剑, 吉洪湖, 白花蕾. 齿间环形凹槽结构对直通篦齿封严特性影响的数值研究[J].流体机械, 2007, 35(12): 21-24
[14] 刘高文, 蒋兆午, 务卫涛, 等. 基于数值模拟的矩形凹槽对直通型篦齿封严特性影响研究[J].推进技术, 2013, 34(2):181-186.( LIU Gao-wen, JIANG Zhao-wu, WU Wei-tao, et al. Investigation on Effects of Rectangular Groove on Leakage of Straight-Trough Labyrinth Seal Based on Numerical Simulation[J]. Journal of Propulsion Technology, 2013, 34(2):181-186.)
[15] 纪国剑, 吉洪湖, 王政伟. 齿间浅槽结构对直通篦齿封严特性影响的实验[J].航空动力学报, 2011, 26(3): 558-562.(编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2013-12-08；修订日期:2014-02-20。作者简介:童飞(1990—),男,硕士,研究领域为航空发动机封严技术。E-mail:tf900620@163.com