基于扩展有限元的改性双基推进剂的开裂过程模拟研究

推进技术 ›› 2015, Vol. 36 ›› Issue (1): 149-154.

基于扩展有限元的改性双基推进剂的开裂过程模拟研究

汪文强,郑健,陈雄,赵超,许进升,周长省

南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094

发布日期:2021-08-15
作者简介:汪文强(1988—)，男，硕士生，研究领域为固体火箭发动机装药结构完整性分析。
基金资助:
总装重点预研项目(20101019)。

Numerical Simulation of Crack Propagation in CMDB Propellant Based on Extended Finite Element Method

School of Mechanical Engineering， Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering， Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering， Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering， Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering， Nanjing University of Science and Technology，Nanjing 210094，China and School of Mechanical Engineering， Nanjing University of Science and Technology，Nanjing 210094，China

Published:2021-08-15

摘要/Abstract

摘要： 为研究和模拟改性双基推进剂(CMDB)在准静态条件下的断裂特性，利用扩展有限元XFEM技术，建立了中心直裂缝含加载平台的圆盘形三维模型。基于线粘弹性理论，通过单轴拉伸实验直接获取改性双基推进剂的最大拉应力8.21MPa，作为仿真模型中裂纹粘聚区的断裂强度，模拟了固体推进剂在静态加载条件下裂纹实时扩展过程。结果表明实验和仿真过程中裂纹均首先呈I型扩展，最后以复合断裂形式扩展失效。讨论了推进剂在压缩断裂过程中裂纹扩展区的应力变化对裂纹扩展的影响，发现实验预期结果与仿真结果符合性良好，说明扩展有限元法能够为改性双基推进剂断裂过程的数值模拟提供新的方法。

关键词: 固体推进剂; 扩展有限元；线粘弹性；复合断裂

Abstract: In order to study and simulate the CMDB propellant fracture properties under quasi-static conditions， a three-dimensional model of a flatten disc with an embedded straight through crack was established based on the extended finite element(XEFM)technique. Based on linear visco-elastic theory， the maximum tensile stress 8.21MPa of the CMDB propellant through uniaxial tensile test was obtained directly， to be as the fracture strength of the cohesive zone.The crack propagation process of the solid propellant under static loading conditions was simulated. The crack propagated in mode-I firstly and then in mixed-mode in the solid propellant specimen that were found in both experimental and simulation results. The influence of the changing stress along crack path was analyzed. The numerical simulation results show a good agreement with the experiment results. The results suggest that the XFEM technique provides a new method to simulate the CMDB propellant fracture process.

Key words: Solid propellant；XFEM；Linear visco-elastic；Mixed-mode fracture

汪文强,郑健,陈雄,赵超,许进升,周长省. 基于扩展有限元的改性双基推进剂的开裂过程模拟研究[J]. 推进技术, 2015, 36(1): 149-154.

WANG Wen-qiang, ZHENG Jian, CHEN Xiong, ZHAO Chao, XU Jin-sheng, ZHOU Chang-sheng. Numerical Simulation of Crack Propagation in CMDB Propellant Based on Extended Finite Element Method[J]. Journal of Propulsion Technology, 2015, 36(1): 149-154.

参考文献

[1] 职世君, 孙冰, 张建伟. 固体推进剂复合型裂纹扩展数值计算[J]. 固体火箭技术, 2011, 34(1): 28-31.
[2] 韩波, 鞠玉涛, 许进升, 等. 基于粘聚区模型的推进剂开裂数值仿真[J]. 弹道学报, 2012, 24(1): 63-68.
[3] Belytschko T, Black T. Elastic Crack Growth in Finite Elements With Minimal Remeshing[J]. International Journal for Numerical Methods in Engineering, 1999, 45(5): 601-620
[4] Zi G, Belytschko T. New Crack-Tip Elements for XFEM and Applications to Cohesive Cracks[J]. International Journal for Numerical Methods in Engineering, 2003, 57(15): 2221-2240.
[5] 王春光, 田维平, 任全彬, 等. 脉冲发动机中隔层工作过程的数值分析及试验[J]. 推进技术, 2012, 33(5): 790-794. (WANG Chun-guang, TIAN Wei-ping,REN Quan-bin, et al. Numerical Analysis and Test on Work Process of Pulse Separation Device in Pulse Motor[J]. Journal of Propulsion Technology,2012,33(5):790-794.)
[6] 茹忠亮, 申崴, 赵洪波. 基于扩展有限元法的钢筋混凝土梁复合断裂过程模拟研究[J]. 工程力学, 2013, 30(5): 215-220.
[7] Erdogan F, Sih G C. On the Crack Extension in Plates Under Plane Loading and Transverse Shear[J]. Journal of basic engineering, 1963, 85(4): 519-525.
[8] 孟红磊, 鞠玉涛, 周长省. 改性双基推进剂松弛模量的确定方法[J]. 工程力学, 2012, 29(9): 359-362.
[9] Joonas Sorvari, Matti Malinen. On the Direct Estimation of Creep and Relaxation Functions[J]. Mechanics of Time-Dependent Materials, 2007, 11(2): 143-157.
[10] Tabakovi A, Kara A Ivankovi A, Gibney. Modelling the Quasi-Static Behaviour of Bituminous Material Using a Cohesive Zone Model[J]. Engineering Fracture Mechanics, 2010, 77(13): 2403-2418.
[11] Ba?ant Z P, Li YN. Cohesive Crack With Rate-Dependent Opening and Visco-Elasticity: I.Mathematical Model and Scaling[J].International Journal of Fracture, 1997, 86(3): 247-265.
[12] 张建彬, 鞠玉涛, 周长省. 双基固体推进剂率相关性研究[J]. 弹道学报, 2011, 23(4): 80-83.
[13] 孟红磊, 赵秀超, 鞠玉涛, 等. 基于累积损伤的双基推进剂强度准则及实验[J]. 推进技术, 2011, 32(1): 109-112.(MENG Hong-lei, ZHAO Xiu-chao, JU Yu-tao et al. Strength Criterion Based on Accumulative Damage for Double-Base Propellant and Experiment[J].Journal of Propulsion Technology, 2011, 32(1): 109-112.)
[14] 卢剑锋. 冲击载荷作用下材料和结构力学行为有限元模拟[D]. 北京:清华大学,2003.
[15] Lan M, Waisman H, Harari I. A Direct Analytical Method to Extract Mixed-Mode Components of Strain Energy Release Rates From Irwin's Integral Using Extended Finite Element Method[J]. International Journal for Numerical Methods in Engineering, 2013, 95(12): 1033-1052.(编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2013-12-25；修订日期:2014-03-04。基金项目:总装重点预研项目(20101019)。作者简介:汪文强(1988—),男,硕士生,研究领域为固体火箭发动机装药结构完整性分析。E-mail: 18705161879@139.com