微尺度冲击冷却通道换热特性实验研究

推进技术 ›› 2015, Vol. 36 ›› Issue (1): 82-88.

微尺度冲击冷却通道换热特性实验研究

郑杰¹,朱惠人¹,郭涛¹,孟通¹,郭文²,苏云亮²

西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072,中国燃气涡轮研究院涡轮室，四川成都 610500,中国燃气涡轮研究院涡轮室，四川成都 610500

发布日期:2021-08-15
作者简介:郑杰(1987—)，男，博士生，研究领域为航空发动机高温部件冷却设计。
基金资助:
国家重点基础研究发展规划资助项目(2013CB035702)。

Experimental Investigation on Jet Impingement Heat Transfer for Micro-Channel

School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,Turbine Group，China Gas Turbine Establishment ，Chengdu 610500 ，China and Turbine Group，China Gas Turbine Establishment ，Chengdu 610500 ，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究真实发动机尺寸下冲击通道的流动与换热情况，选取冲击孔与气膜孔孔径均为D=0.3mm，0.4mm，0.5mm，冲击距H/D=2，2.5，3.0，孔间距P/D=5，10，雷诺数Re范围为1000～10000，保证与真实发动机工况相等的克努森数下，对不同结构微小冲击通道的整体换热情况进行分析比较。结果表明:在相同的雷诺数下，通道整体平均换热系数随着孔径的减小而增加，随着冲击距H/D的增加而减小，随着冲击孔间距P/D的增加而减小，并且拟合出了相关经验关系式。

关键词: 冲击冷却；微尺度；换热系数；雷诺数

Abstract: Experiments are conducted to investigate the flow and heat transfer characteristics of inner cooling channel with real engine sizes. The diameter of impingement holes and film holes are 0.3mm，0.4mm and 0.5mm，respectively. Ratios of the distance between the impingement plate and the target plate to the impingement hole diameter(H/D)are 2，2.5 and 3.0，respectively. Hole pitch to diameter ratios(P/D)are 5 and 10， respectively. The Reynolds number varies from 1000 to 10000，Knudsen number is equal to the Knudsen number in real working condition of engine. The thermodynamic characteristics of micro-scale impingement channels with different geometry are studied. The results show that with the same Reynolds number，average heat transfer coefficient of channel increases as the hole diameter decreases，and it decreases as the magnitude of H/D or P/D increases，and the empirical correlation has been fitted.

Key words: Impingement cooling；Micro-scale；Heat transfer coefficients；Reynolds

郑杰,朱惠人,郭涛,孟通,郭文,苏云亮. 微尺度冲击冷却通道换热特性实验研究[J]. 推进技术, 2015, 36(1): 82-88.

ZHENG Jie¹,ZHU Hui-ren¹,GUO Tao¹,MENG Tong¹,GUO Wen²,SU Yun-liang². Experimental Investigation on Jet Impingement Heat Transfer for Micro-Channel[J]. Journal of Propulsion Technology, 2015, 36(1): 82-88.

参考文献

[1] Bunker R S. Gas Turbine Heat Transfer: Ten Remaining Hot Gas Path Challenges[J]. Journal of Turbomachinery, 2007, 129(2): 193-201.
[2] 陶然, 权晓波, 徐建中, 等. 微尺度流动研究中的几个问题[J]. 工程热物理学报, 2001, 22(5): 575-577.
[3] Turner S E, Lam L C, Faghri M, et al. Experimental Investigation of Gas Flow in Microchannels[J]. Journal of Heat Transfer, 2004, 126(5): 753-763.
[4] 张效伟, 朱惠人, 张霞, 等. 小尺度孔的流量系数试验[J]. 航空动力学报: 2010, 25(11): 2479-2485.
[5] Celata G P, Cumo M, Mcphail S J, et al. Experimental Study on Compressible Flow in Microtubes[J]. International Journal of Heat and Fluid Flow, 2007, 28(1): 28-36.
[6] 马吉. 微小通道内低雷诺数流动的实验研究[D]. 南京: 南京航空航天大学, 2004.
[7] Weaver S A, Barringer M D, Thole K A. Micro Channels with Manufacturing Roughness Levels[R]. ASME GT-2010-22976.
[8] Kosar A, Mishra C, Peles Y. Laminar Flow Across a Bank of Low Aspect Ratio Micro Pin Fins[J]. Journal of Fluids Engineering, Transactions of the ASME, 2005, 127(3): 419-430.
[9] Marques C, Kelly K W. Fabrication and Performance of a Pin Fin Micro Heat Exchanger[J].Journal of Heat Transfer, 2004, 126(3): 434-444.
[10] Owhaib W, Palm B. Experimental Investigation of Single-Phase Convective Heat Transfer in Circular Microchannels[J]. Experimental Thermal and Fluid Science, 2004, 28(2-3): 105-110.
[11] Jiang L, Wang Y, Wong M, et al. Fabrication and Characterization of a Microsystem for a Micro-Scale Heat Transfer Study[J].Journal of Micromechanics and Microengineering, 1999, 9(4): 422-428.
[12] Jung J Y, Oh H S, Kwak H Y. Forced Convective Heat Transfer of Nanofluids in Microchannels [J]. International Journal of Heat and Mass Transfer, 2009, 52(1-2): 466-472.
[13] Van Rij J, Ameel T, Harman T. The Effect of Viscous Dissipation and Rarefaction on Rectangular Microchannel Convective Heat Transfer [J]. International Journal of Thermal Sciences, 2009, 48(2): 271-281.
[14] 许艳芝, 朱惠人, 郑杰. 克努森数在微尺度相似流动特性研究中的作用[J]. 航空动力学报, 2013, 28(8): 1752-1758.
[15] Al Bakhit H, Fakheri A. A Hybrid Approach for Full Numerical Simulation of Heat Exchangers [R]. ASME HT2005-72745.(编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2013-12-17；修订日期:2014-01-17。基金项目:国家重点基础研究发展规划资助项目(2013CB035702)。作者简介:郑杰(1987—),男,博士生,研究领域为航空发动机高温部件冷却设计。E-mail:zhengjie543210@163.com