针栓喷注式MMH/NTO推力室燃烧及传热数值仿真

推进技术 ›› 2015, Vol. 36 ›› Issue (10): 1487-1494.

针栓喷注式MMH/NTO推力室燃烧及传热数值仿真

张连博¹,毛晓芳²,汪凤山²,徐旭¹

北京航空航天大学宇航学院，北京 100191,北京控制工程研究所，北京 100190,北京控制工程研究所，北京 100190,北京航空航天大学宇航学院，北京 100191

发布日期:2021-08-15
作者简介:张连博(1987—)，男，硕士生，研究领域为航空宇航推进理论与工程。

Numerical Simulation of Pintle Thruster Combustion and Heat Transfer for MMH/NTO Hypergolic Bipropellant

School of Astronautics，Beijing University of Aeronautics and Astronautics，Beijing 100191，China,Beijing Institute of Control Engineering，Beijing 100190，China,Beijing Institute of Control Engineering，Beijing 100190，China and School of Astronautics，Beijing University of Aeronautics and Astronautics，Beijing 100191，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究针栓喷注器不同压降、动量比和雾化细度对燃烧室流场结构和推力室性能的影响，采用Euler-Lagrange方法对针栓喷注式双组元MMH/NTO自燃推进剂液体火箭发动机进行了燃烧流动与耦合传热数值仿真。燃料液滴喷射的初始条件由VOF方法计算获得，流场计算采用Realizable k-ε湍流模型及11组分4步反应化学动力学模型，流固耦合区域对流换热为耦合换热边界。结果显示，采用VOF方法获得的液滴初始喷射角度与实验值相差1.8%～3.5%；仿真计算室压与热试车结果相差2.73%。仿真研究表明:针栓喷注器的压降对燃烧室流场特性的影响要比动量比的影响更显著；对于内路为燃料外路为氧化剂的针栓喷注器而言，改善燃料路的雾化效果所获得的推力室性能比改善氧化剂路的雾化效果所获得的性能更敏感。

关键词: 针栓式喷注器；自燃推进剂；液体火箭发动机；燃烧流动与传热；数值仿真

Abstract: In order to investigate the effects of pintle injector pressure drop，momentum ratio and particle size on combustor flow field structure and thruster performances，numerical simulation of combustion and conjugate heat transfer for a MMH/NTO hypergolic bipropellant pintle engine was performed by Euler-Lagrange method. The initial condition of injecting liquid droplets was obtained by VOF model. Realizable k-ε turbulence model and 4-step with 11 species chemical reaction model were utilized to simulate the flow fields. The heat transfer of Fluid-Structure Interaction(FSI)region was conjugate heat transfer boundary. The results show that，there is a difference of 1.8% to 3.5% between initial injecting angle obtained by VOF and test data. The difference of chamber pressure between simulation and test is about 2.73%. As the simulation results shown，the pintle injector’s pressure drop has salient effect on combustor performance than momentum ratio. For the pintle configuration with inner fuel and outer oxidizer，the thruster performance obtained by improving the atomization of fuel is more sensitive than by improving the atomization of oxidizer.

Key words: Pintle injector；Hypergolic propellant；Liquid rocket engine；Combustion flow and heat transfer；Numerical simulation

张连博,毛晓芳,汪凤山,徐旭. 针栓喷注式MMH/NTO推力室燃烧及传热数值仿真[J]. 推进技术, 2015, 36(10): 1487-1494.

ZHANG Lian-bo¹,MAO Xiao-fang²,WANG Feng-shan²,XU xu¹. Numerical Simulation of Pintle Thruster Combustion and Heat Transfer for MMH/NTO Hypergolic Bipropellant[J]. Journal of Propulsion Technology, 2015, 36(10): 1487-1494.

参考文献

[1] 张育林. 变推力液体火箭发动机及其控制技术[M].北京:国防工业出版社, 2001.
[2] Elverum G, Staudhammer P. The Decent Engine for the Lunar Module[R]. AIAA 67-521.
[3] Austin B L, Heister S D, Anderson W E. Characterization of Pintle Engine Performance for Nontoxic Hypergolic Bipropellants[R]. Journal of Propulsion and Power, 2005, 21(4): 627-635.
[4] Gordon A Dressler, Martin Bauer J. TRW Pintle Engine Heritage and Performance Characteristics[R]. AIAA 2000-3871.
[5] Gavitt K, Mueller T, Wong T, et al. TRW LCPE 650 Klbf LOX/LH2 Test Results[R]. AIAA 2000-3853.
[6] Gavitt K, Mueller T. Testing of the 650 Klbf LOX/LH2 Low Cost Pintle Engine(LCPE)[R]. AIAA 2001-3987.
[7] Tom Mueller, Gordon Dressler. TRW 40 Klbf LOX/RP-1 Low Cost Pintle Engine Test Results[R]. AIAA 2000-3863.
[8] 韩泉东. 空间变推力液体火箭发动机流量调节及燃烧过程仿真研究[D]. 长沙:国防科技大学, 2006.
[9] 李进贤, 岳春国, 侯晓, 等. 针栓式变推力火箭发动机内流场数值仿真研究[J]. 计算机仿真, 2009, 26(8): 49-52.
[10] 岳春国, 李进贤, 冯喜平, 等. 针栓式变推力火箭发动机技术现状与发展探索[J]. 世界科技研究与发展,2008, 30(5): 609-612.
[11] 王振国. 液体火箭发动机燃烧过程建模与数值仿真[M]. 北京:国防工业出版社, 2012.
[12] 聂万胜, 丰松江. 液体火箭发动机燃烧动力学模型与数值计算[M]. 北京:国防工业出版社, 2011.
[13] 林庆国. 空间轨控发动机高效燃烧室仿真与实验研究[D]. 长沙:国防科技大学, 2013.
[14] Knab O,Preclik D,Estublier D.Flow Field Prediction within Liquid Film Cooled Combustion Chambers of Storable Bi-Propellant Rocket Engines[R]. AIAA 98-3370.
[15] Xu Kun-mei, Cai Guo-biao, Zheng Yun-tao. Flow Field Numerical Study within Thrust Chamber of Aerospace Small Liquid Propellant Rocket Engine[R]. IAC-06-C4.P.1.06, 2006.
[16] 张其阳, 王兵, 张会强, 等. 液膜内冷与辐射外冷发动机室压上限的研究[J]. 推进技术, 2013, 34(6): 781-785. (ZHANG Qi-yang, WANG Bing, ZHANG Hui-qiang, et al. A Study on Chamber Pressure Upper Limit of Liquid Rocket Engine Utilizing Film and Radiative Cooling[J]. Journal of Propulsion Technology, 2013, 34(6): 781-785.)
[17] 庄逢辰. 液体火箭发动机喷雾燃烧的理论、模型及应用[M]. 长沙:国防科技大学出版社, 1995.(编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2014-07-16；修订日期:2014-09-12。作者简介:张连博(1987—),男,硕士生,研究领域为航空宇航推进理论与工程。E-mail: zlb.0827@sa.buaa.edu.cn