推进技术 ›› 2015, Vol. 36 ›› Issue (10): 1547-1553.

• 结构强度振动 • 上一篇    下一篇

基于子结构试验建模综合的火箭发动机结构动力分析

杜飞平1,谭永华2,陈建华1   

  1. 西安航天动力研究所,陕西 西安 710100,航天推进技术研究院,陕西 西安 710100,西安航天动力研究所,陕西 西安 710100
  • 发布日期:2021-08-15
  • 作者简介:杜飞平(1986—),男,博士生,工程师,研究领域为液体火箭发动机结构动态特性分析。

Structural Dynamic Analysis of Rocket Engine Based on Synthetic Technology for Substructure Test Model

  1. Xi’an Aerospace Propulsion Institute,Xi’an 710100,China,Academy of Aerospace Propulsion Technology,Xi’an 710100,China and Xi’an Aerospace Propulsion Institute,Xi’an 710100,China
  • Published:2021-08-15

摘要: 为了预测补燃循环液体火箭发动机的结构动态特性,采用子结构试验建模综合技术,对四机并联液体火箭发动机的结构动力学进行了研究。在考虑喷管内外壁材料差异的基础上,利用刚度和质量等效原则,建立了精确的喷管有限元模型,然后采用分布参数法建立了发动机有限元模型。结果表明:单机子结构模型的误差小于1.35%;四机并联发动机模型的误差小于2.19%;且仿真振型与实际模态试验结果保持一致。说明该方法的计算结果可靠,能提高结构动态分析的精度和效率。

关键词: 液体推进剂火箭发动机;子结构试验建模;试验模态分析;模态参数;有限元法

Abstract: In order to predict the structural dynamic characteristics of a staged combustion liquid rocket engine,a new synthetic technology for substructure test model was adopted for structural dynamic analysis of the four parallel connected liquid rocket engines. By considering the material differences between the inner and outer wall of the nozzle,the precise finite element model of the nozzle was established using the principles of mass and stiffness equivalence. Then the finite element model of the rocket engine was established using the method of distributed parameters. The results show that the error of the substructure model of the single engine model is less than 1.35%. The error of the model of four parallel connected engines is less than 2.19%. And the simulation modes of vibration are very consistent with the ones obtained from the practical test modal values. It shows that the calculation results by this method are reliable. And it can improve the precision and efficiency of structural dynamic analysis.

Key words: Liquid propellant rocket engine;Substructure test model;Test modal analysis;Modal parameters;Finite element method