基于有限元分析的激波管电晕放电单元设计及特性分析

推进技术 ›› 2015, Vol. 36 ›› Issue (11): 1748-1753.

基于有限元分析的激波管电晕放电单元设计及特性分析

沈双晏,金星,张鹏,杨波

装备学院激光推进及其应用国家重点实验室，北京 101416,装备学院激光推进及其应用国家重点实验室，北京 101416,装备学院激光推进及其应用国家重点实验室，北京 101416,装备学院激光推进及其应用国家重点实验室，北京 101416

发布日期:2021-08-15
作者简介:沈双晏(1987—)，男，博士生，研究领域为等离子体强化点火。
基金资助:
国家自然科学基金(11372356)。

Design and Characteristic of Corona Discharge Unit in Shock Tube Based on Finite Element Analysis

Equipment Academy，State Key Laboratory of Laser Propulsion & Application，Beijing 101416，China,Equipment Academy，State Key Laboratory of Laser Propulsion & Application，Beijing 101416，China,Equipment Academy，State Key Laboratory of Laser Propulsion & Application，Beijing 101416，China and Equipment Academy，State Key Laboratory of Laser Propulsion & Application，Beijing 101416，China

Published:2021-08-15

摘要/Abstract

摘要： 为在激波管中研究等离子体对碳氢燃料点火延迟时间的影响，基于有限元分析方法，模拟了在激波管末端面使用同轴放电的方式对激波管壁进行放电，计算了放电过程中的电参数，相比圆柱形电极，带尖端的放电电极更容易在局部产生更高的电场强度。内径10cm的圆筒中，对于直径1cm的电极，附加100kV的电压周围最大电场强度为176kV/cm。对于顶端带尖端的电极，尖端处的最大电场强度达到了435kV/cm。而对于侧面带尖端的电极，尖端处的最大电场强度约为250kV/cm。依据仿真的结果，设计了激波管放电单元，并进行基于激波管的电晕放电实验。研究了不同内径金属圆筒中电晕放电与电弧放电的电压范围。当圆筒内径为40mm时，适合电晕放电的功率范围为3～16.7W。圆筒内径为100mm时，适合电晕放电的功率范围为1.6～50.5W。

关键词: 激波管；电晕放电；放电单元；有限元

Abstract: In order to study the effect of ignition delay of hydrocarbon fuel acted by plasma，the discharge at the end of the shock tube in coaxial discharge was simulated based on finite element analysis. The electrical parameters in the discharge process were calculated. The electrode with tips would produce higher electric field intensity locally compared with the cylinder electrode. 100kV voltage applied on 1cm diameter electrode in 10cm inner diameter cylinder would produce 176kV/cm maximum electric field intensity. The electrode with tip at top would produce 435kV/cm maximum electric field intensity and the electrode with tip at side would produce 250kV/cm maximum electric field intensity. The discharge unit of the shock tube was designed based on the simulation results and the corona discharge experiment was carried out. The voltage range of corona discharge and arc discharge in metal cylinder of different diameter was studied. The power range is 3～16.7W for the 40mm inner diameter cylinder and 1.6～50.5W for the 100mm inner diameter cylinder when corona discharge was taking place.

Key words: Shock tube；Corona discharge；Discharge unit；Finite element

沈双晏,金星,张鹏,杨波. 基于有限元分析的激波管电晕放电单元设计及特性分析[J]. 推进技术, 2015, 36(11): 1748-1753.

SHEN Shuang-yan,JIN Xing,ZHANG Peng,YANG Bo. Design and Characteristic of Corona Discharge Unit in Shock Tube Based on Finite Element Analysis[J]. Journal of Propulsion Technology, 2015, 36(11): 1748-1753.

参考文献

[1] Starikovskaia S M. Plasma Assisted Ignition and Combustion[J]. Journal of Physics D: Applied Physics, 2006, 39(16): 265-299.
[2] Timothy O, Yinguang J. Investigation of Non-Equilibrium Plasma Induced Kinetic Ignition of Counter flow Diffusion Flames [R]. AIAA 2008-1361.
[3] Joseph K L, Yinguang J. A Study of Plasma-Assisted Ignition in a Small Internal Combustion Engine[R]. AIAA 2012-1133.
[4] 韦宝禧, 欧东, 闫明磊, 等. 超燃燃烧室等离子体点火和火焰稳定性能[J]. 北京航空航天大学学报, 2012, 38(12): 1572-1576.
[5] 李勇, 沈怀荣. 非平衡等离子体对甲烷点火和火焰传播的机理分析[J]. 推进技术, 2013, 34(11): 1530-1536. (LI Yong, SHEN Huai-rong. Mechanism Analysis of Non-Equilibrium Plasma Effects on Ignition and Flame Propagation of Methane/Air Mixture[J]. Journal of Propulsion Technology, 2013, 34(11): 1530-1536.)
[6] Pang G A, Davidson D F, Hanson R K. Experimental Study and Modeling of Shock Tube Ignition Delay Times for Hydrogen- Oxygen-Argon Mixtures at Low Temperatures[J]. Proceedings of the Combustion Institute, 2009, 32(1): 181-188.
[7] 廖钦. 煤油及其裂解产物自点火现象的初步实验研究[D]. 合肥:中国科学技术大学, 2009: 10-18.
[8] 梁金虎, 王苏, 张灿, 等. H2O/CO₂污染对RP-3航空煤油着火特性的影响[J]. 推进技术, 2015, 36(3): 336-344. (LIANG Jin-hu, WANG Su, ZHANG Can, et al. Effect of H2O and CO₂ on Ignition Characteristics of RP-3 Aviation Kerosene[J]. Journal of Propulsion Technology, 2015, 36(3): 336-344.)
[9] 马洪安, 解茂昭, 曾文, 等. RP-3航空煤油着火特性的影响因素分析[J]. 推进技术, 2015, 36(2): 306-313. (MA Hong-an, XIE Mao-zhao, ZENG Wen, et al. Influencing Factor Analysis for Ignition Characteristics of RP-3 Kerosene[J]. Journal of Propulsion Technology, 2015, 36(2): 306-344.)
[10] Kosarev I N, Aleksandrov S V, Starikovskaia S M, et al. Kinetics of Ignition of Saturated Hydrocarbons by Nonequilibrium Plasma: CH4-Containing Mixtures[J]. Combustion and Flame, 2008, 154: 569-586.
[11] Kosarev I N, Aleksandrov S V, Kindysheva S M, et al. Kinetics of Ignition of Saturated Hydrocarbons by NonEquilibrium Plasma: C2H6- to C5H12- Containing Mixtures[J]. Combustion and Flame, 2009, 156: 221-233.
[12] Kosarev I N, Pakhomov A I, Kindysheva S V, et al. Nanosecond Discharge Ignition in Acetylene-Containing Mixtures[J]. Plasma Sources Science and Technology, 2013, 22: 1-9.
[13] 陈曦, 黄韬, 付巍. 基于有限元分析的静电探测器电极设计[J]. 北京理工大学学报, 2011, 31(4): 413-416.
[14] 胡辉, 杨旗, 包斌, 等. 基于ANSYS的空气电弧放电等离子体温度数值模拟[J]. 电工电能新技术, 2009, 28(2): 20-28.
[15] 赵贵. 基于AFM探针的电晕放电初步研究[D]. 合肥:中国科学技术大学, 2011: 37-50.
[16] 陈强. 激波管流动的理论和实验技术[M]. 合肥: 中国科技大学五系, 1979: 81-83.
[17] 许根慧, 姜恩永, 盛京, 等. 等离子体技术与应用[M]. 北京:化学工业出版社, 2006: 30-32.
[18] 张谷令, 敖玲, 胡建芳, 等. 应用等离子体物理学[M]. 北京:首都师范大学出版社, 2008: 80-85. 　　　　　　　　　　　　　*　收稿日期:2015-05-18；修订日期:2015-07-25。基金项目:国家自然科学基金(11372356)。作者简介:沈双晏(1987—),男,博士生,研究领域为等离子体强化点火。E-mail: ssy_fly@163.com(编辑:梅瑛)