跨声速压气机转子的二次流旋涡结构

推进技术 ›› 2015, Vol. 36 ›› Issue (4): 504-512.

跨声速压气机转子的二次流旋涡结构

王如根,胡加国,余超,李坤

空军工程大学航空航天工程学院，陕西西安 710038,空军工程大学航空航天工程学院，陕西西安 710038,空军工程大学航空航天工程学院，陕西西安 710038,空军工程大学航空航天工程学院，陕西西安 710038

发布日期:2021-08-15
作者简介:王如根( 1962—)，男，教授，博士生导师，研究领域为航空推进系统气动热力理论、发动机总体设计。
基金资助:
国家自然科学基金重点项目( 51336011)。

ResearchonSecondaryFlowVortexStructureinTransonic

School of Aeronautics and Astronautics Engineering，Air Force Engineering University，Xi’an 710038，China,School of Aeronautics and Astronautics Engineering，Air Force Engineering University，Xi’an 710038，China,School of Aeronautics and Astronautics Engineering，Air Force Engineering University，Xi’an 710038，China and School of Aeronautics and Astronautics Engineering，Air Force Engineering University，Xi’an 710038，China

Published:2021-08-15

摘要/Abstract

摘要： 为了明确跨声速轴流压气机内部流场结构，数值模拟了 NASA Rotor37转子，结合 λ2准则分析流场参数，探索流动的规律和旋涡结构。研究发现，压气机转子的旋涡模型主要由马蹄涡、壁角涡、径向涡、脱落涡、泄漏涡、诱导涡和分离涡等 7个旋涡组成。马蹄涡吸力面分支耗散，压力面分支向相邻的吸力面发展。壁角涡与脱落涡位于叶根角区，引起流动损失和角区失速。径向涡位于激波后吸力面的分离区内，它扩大吸力面分离、引起低能流体向叶顶堆积。激波与叶尖泄漏在叶顶通道中形成 3涡:泄漏涡、诱导涡和分离涡，而叶栅通道出口存在分离涡和由泄漏涡与诱导涡合成的叶顶通道涡。泄漏涡与诱导涡破碎在流道中间产生的堵塞区，分离涡造成吸力面尾缘的低速区，共同触发跨声速压气机的失稳。

关键词: 跨声速轴流压气机；数值模拟；涡动力学；二次流；旋涡模型

Abstract: To study the flow structure in transonic axial compressor，numerical simulation was conducted with NASA Rotor37 and the flow field parameters were analyzed to explore the vortex flow pattern and structurecoupled with the λ2 criteria. It is found that vortex model in the rotor is consisted of seven major vortexes: horse. shoe vortex，corner vortex，shedding vortex，radial vortex，leakage vortex，induced vortex and separation vortex.Suction side leg of horseshoe vortex is dissipated while pressure side leg develops to adjacent suction side. Majoreffect of shedding vortex and corner vortex induces flow loss and hub corner stall，which are located at the root of blade. Radial vortex，which is located behind shock and in separation zone，enlarges the suction side separationand causes migration of low energy fluid in boundary layer to the tip. Coupling of shockwave and tip leakage in.duces the formation of three vortex structure in blade tip passage，namely leakage vortex，induced vortex and sepa. ration vortex. At outlet of tip cascade，there are two vortexes，separation vortex and tip passage vortex combined by leakage vortex and induced vortex. Blockage in the middle of the flow channel caused by the crushing of leak.age vortex and induced vortex，as well as the low-speed zone caused by separation vortex，trigger instability of transonic axial compressor.

Key words: Transonic axial compressor；Numerical simulation；Vorticity dynamics；Secondary flow；Vortex

王如根,胡加国,余超,李坤. 跨声速压气机转子的二次流旋涡结构[J]. 推进技术, 2015, 36(4): 504-512.

WANG Ru-gen,HU Jia-guo,YU Chao,LI Kun. ResearchonSecondaryFlowVortexStructureinTransonic[J]. Journal of Propulsion Technology, 2015, 36(4): 504-512.

参考文献

[1] Hah C,Wennerstrom A J.Three-Dimensional Flow Fields Inside a Transonic Compressor with Swept Blades[R].ASME 90-GT-359.
[2] Schlechtriem W E, Lotzerich M.Breakdown of TipLeakage Vortices in Compressors at Flow ConditionsClose to Stall[R].ASME 97-GT-41.
[3] Cornish J J.Vortex Flows[R].ATAA 83-1812.
[4] Moore X X,Richardson Y Y.Skewed Boundary LayerFlow near End Walls of a Compressor Cascade[J].ASME Journal of Engineering for Gas Turbines and Pow.er,1957,79:1789-1800.
[5] 唐燕平,陈懋章,陈芳.扩压叶栅中的旋涡运动[J].航空动力学报, 1990,5(2):103-112.
[6] Kang S.Investigation of the Three Dimensional Flowwithin a Compressor Cascade with and without Tip Clear.ance[D].Belgium: Vrije Universiteit Brussel,1993: I-1-V-44.
[7] 张华良,王松涛,王仲奇 .冲角对压气机叶栅内二次涡的影响[ J].航空动力学报, 2006,21(1):150-155.
[8] 张华良,王松涛,王仲奇 .叶片弯曲对大折转压气机叶栅内分离结构的影响[ J].推进技术, 2007,28(1): 36-39.(ZHANG Hua-liang,WANG Song-tao,WANG Zhong-qi.Effect of Bowed Blades on the Separation Structures[J].Journal of Propulsion Technology,2007, 28(1):36-39.)
[9] 陈绍文,陈浮,张晓辉,等 .大转角正弯扩压叶栅流场性能实验与数值研究[ J].推进技术, 2008,29 (3):349-354.(CHEN Shao-wen,CHEN Fu,ZHANG Xiaohui,et al.Experimental and Numerical Investiga.tion for Flow in Bowed Compressor Cascade with LargeTurningangles[J].Journal of Propulsion Technology, 2008,29(3):349-354.)
[10] Inoue M,Kuroumaru M.Three-Dimensional Structure and Decay of Vortices behind an Axial Flow RotationBlade Row[R].ASME 83-GT-69.
[11] 于贤君,刘宝杰,蒋浩康 .压气机转子尖部三维复杂流动 I——实验与理论研究[ J].航空学报, 2010,31 (1):48-57.
[12] Wisler D C.Advanced Compressor and Fan Systems[M].US: Lecture Notes from UTSI Short Course Aero- propulsion,Dayton,OH,1987.
[13] Reid L,Moore R D.Design and Overall Performance ofFour Highly-Loaded,High-Speed Inlet Stages for an Advanced,High-Pressure-Ratio Core Compressor[R].NASA TP-1337,1978.
[14] Suder K L,Celestina M L.Experimental and Computa.tional Investigation of the Tip Clearance Flow in a Tran. sonic Axial Compressor Rotor[R].NASA TM-106711, 1994.
[15] Hoffman W H,Ballman J.Flow Mechanisms in a Tran.sonic Turbo Compressor at Conditions near Stall[R].IS.ABE 2005-1139.
[16] 卢新根 .轴流压气机内部流动失稳及其被动控制策略研究[ D].西安 :西北工业大学, 2007.
[17] Jeong J,Hussain F.On the Identification of a Vortex[J].Journal of Fluid Mechanics,1995,285: 69-94.
[18] Chakraborty P,Balachandar S,Adrian A J.On the Re.lationships between Local vortex Identification Schemes[J].Journal of Fluid Mechanics,2005,535:189-214.
[19] 胡子俊,张楠,姚惠之,等 .涡判据在孔腔涡旋流动拓扑结构分析中的应用[ J].船舶力学, 2013,16(8):839-846.
[20] Dallmann U.Topological Structure of Three Dimension.al F1ow Separations[R].DFVLR-IB,221-82,A07, 1983.
[21] 张涵信,邓小刚 .二维定常分离流和涡运动的定性分析研究[ J].空气动力学报, 1992,10(1):8-19.
[22] Lei V M,Spakovszky Z S,Greitzer E M.A Criterion for Axial Compressor Hub Corner Stall[R].ASME 2006-GT-91332.
[23] Joslyn H,Dring R.Axial Compressor Stator Aerodynam.ics[J].ASME Journal of Engineering for Gas Turbines and Power,1985,107:485-493.(编辑:张荣莉)* 收稿日期:2014-04-19；修订日期:2014-05-08。基金项目:国家自然科学基金重点项目( 51336011)。作者简介:王如根( 1962—),男,教授,博士生导师,研究领域为航空推进系统气动热力理论、发动机总体设计。 E-mail:tianye_cardc@163.com