基于气动性能优化的涡轮叶顶新型密封构型研究

推进技术 ›› 2015, Vol. 36 ›› Issue (5): 696-702.

基于气动性能优化的涡轮叶顶新型密封构型研究

李钰洁,刘永葆,贺　星

海军工程大学动力工程学院，湖北武汉 430033,海军工程大学动力工程学院，湖北武汉 430033,海军工程大学动力工程学院，湖北武汉 430033

发布日期:2021-08-15
作者简介:李钰洁(1981—)，男，博士生，研究领域为叶轮机械气动热力学。
基金资助:
国防预研基金(4010303010303)。

Optimization Research on a Novel Turbine Blade Tip Seal Configuration Based on Aerodynamic Performance

College of Power Engineering，Naval University of Engineering，Wuhan 430033，China,College of Power Engineering，Naval University of Engineering，Wuhan 430033，China and College of Power Engineering，Naval University of Engineering，Wuhan 430033，China

Published:2021-08-15

摘要/Abstract

摘要： 针对涡轮叶顶密封性能的提高，对带圆形凹槽迷宫密封进行了构型优化研究。分析了不同压比时圆形凹槽数量、尺寸及分布对密封性能以及对涡轮做功效率的影响，初步探索了圆形凹槽降低损失的机理，给出了最佳的凹槽排列方案。结果表明，圆形凹槽的容积效应使泄漏流发生小角度偏转，降低了泄漏损失；压比增大，凹槽的节流能力减弱；所得凹槽最佳排列方案在压比为1.2时，泄漏系数降低了7.14%，效率提高了0.59%；单个凹槽半径由1mm增大到5mm，泄漏系数相对于光滑密封减小5.8%，效率增加0.35%。

关键词: 涡轮；叶顶间隙；密封构型；圆形凹槽；气动性能；数值模拟

Abstract: Aiming at the improvement of the seal performance of turbine blade tip，optimization research on the labyrinth seal with circular grooves was carried out. Effects of circular groove number，dimension and distribution on the seal performance and turbine efficiency in different pressure ratio cases were analyzed. A primary grope for the mechanism of circular grooves was carried out. Optimized plan of the groove array was given. Results show that，volume effect of the circular groove changed the leakage flow direction by a small angle which decreased the leakage loss. The restrain ability decreased with the increase of pressure ratio. The optimized plan decreased the leakage coefficient by 7.14% and increased the turbine efficiency by 0.59% at the pressure ratio of 1.2. Along with the increase of the radius of the circular grooves from 1mm to 5mm，compared with the smooth style，leakage coefficient decreased by 5.8% while turbine efficiency increased by 0.35%.

Key words: Turbine； Tip clearance；Seal configuration；Circular groove；Aerodynamic performance；Numerical simulation

李钰洁,刘永葆,贺　星. 基于气动性能优化的涡轮叶顶新型密封构型研究[J]. 推进技术, 2015, 36(5): 696-702.

LI Yu-jie,LIU Yong-bao,HE Xing. Optimization Research on a Novel Turbine Blade Tip Seal Configuration Based on Aerodynamic Performance[J]. Journal of Propulsion Technology, 2015, 36(5): 696-702.

参考文献

[1] Denton J D. The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines[J]. Journal of Turbomachinery, 1993, 115(4): 621-656.
[2] J Gao, Q Zheng, G Yue, et al. Control of Shroud Leakage Flows to Reduce Mixing Losses in a Shrouded Axial Turbine[J]. Journal of Mechanical Engineering Science, 2011, 226: 1263-1277.
[3] Anker J E, Mayer J F, Casey M V. The Impact of Rotor Labyrinth Seal Leakage Flow on the Loss Generation in an Axial Turbine[J]. Journal of Power and Energy, 2005, 219(6): 481-490.
[4] 李志刚, 郎骥, 李军. 迷宫密封泄漏特性的试验研究[J]. 西安交通大学学报, 2011, 45(3): 48-52.
[5] 喻雷, 常海萍, 马虎跃. 涡轮叶冠间隙流场PIV测量[J]. 航空动力学报, 2012, 27(8):1849-1854.
[6] Schlienger J, Pfau A, Kalfas A I, et al. Effects of Labyrinth Seal Variation on Multistage Axial Turbine Flow[R]. ASME GT2003-38270.
[7] 杜发青, 吉洪湖, 帅海山, 等. 齿形几何参数对直通密封齿密封泄漏特性影响的正交实验[J]. 航空动力学报, 2013, 28(4): 825-831.
[8] 吴宏, 李澎, 陶智. 直齿直通式密封齿密封计算模型[J]. 航空动力学报, 2012, 27(10):2180-2187.
[9] 张效伟, 朱惠人, 张霞, 等. 直通型密封齿泄漏的特性试验[J]. 航空动力学报, 2011, 26(9):1970-1974.
[10] 贾惟, 刘火星. 涡轮叶栅叶冠泄漏流动数值研究[J]. 推进技术, 2013, 34(3):316-325.(JIA Wei, LIU Huo-xing. Numerical Investigation on Shroud Leakage Flow in Turbine Cascade[J]. Journal of Propulsion Technology, 2013, 34(3):316-325.)
[11] Xu J, Ambrosia M S, David L. Effect of Tooth Bending Damage on the Leakage of Straight-Through Labyrinth Seals[R]. ASME GT2013-77455.
[12] Emanuel M, Gerald M. Leakage and Rotordynamics Numerical Study of Circular Grooved and Rectangular Grooved Labyrinth Seals[R]. ASME GT2013-96001.
[13] Sekaran A. Study of Impact of Orbit Path, Whirl Ratio and Clearance on the Flow Field and Rotordynamic Coefficients for a Smooth Annular Seal [D]. Texas: Texas A&M University, 2009.
[14] 纪国剑, 吉洪湖, 王政伟. 齿间浅槽结构对直通密封齿密封特性影响的实验[J]. 航空动力学报, 2011, 26(3):558-562.
[15] 刘高文, 蒋兆武, 务卫涛, 等. 基于数值模拟的矩形凹槽对直通型密封齿密封特性影响研究[J]. 推进技术, 2013, 34(2):181-186.(LIU Gao-wen, JIANG Zhao-wu, WU Wei-tao, et al. Investigation on Effects of Rectangular Groove on Leakage of Straight-Through Labyrinth Seal Based on Numerical Simulation[J]. Journal of Propulsion Technology, 2013, 34(2):181-186.)
[16] Porreca L, Behr T, Schlienger J, et al. Fluid Dynamics and Performance of Partially and Fully Shrouded Axial Turbines[J]. Journal of Turbomachinery, 2005, 127(4): 668-678.
[17] Porreca L, Kalfas A I, Abhari R S. Optimized Shroud Design for Axial Turbine Aerodynamic Performance[R]. ASME 2007-GT-27915.(编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2014-03-19；修订日期:2014-06-05。基金项目:国防预研基金(4010303010303)。作者简介:李钰洁(1981—),男,博士生,研究领域为叶轮机械气动热力学。E-mail:majinjinlyj@126.com