推进技术 ›› 2015, Vol. 36 ›› Issue (6): 933-939.

• 材料 推进剂 燃料 • 上一篇    下一篇

低燃速贫氧推进剂燃气发生器端面燃烧规律动态诊断研究

田赤军1,黄海龙2,高新锋2,郑日恒2,3,胡小兵2,赖谋荣2,刘佩进4   

  1. 海军装备部天津军事代表局,北京100073,北京动力机械研究所,北京 100074,北京动力机械研究所,北京 100074,北京动力机械研究所,北京 100074; 北京动力机械研究所 高超声速冲压发动机技术重点实验室,北京 100074,北京动力机械研究所,北京 100074,北京动力机械研究所,北京 100074,西北工业大学 燃烧、热结构与内流场重点实验室,陕西 西安 710072
  • 发布日期:2021-08-15
  • 作者简介:田赤军(1961—),男,高工,研究领域为导弹发动机总体。E-mail:tianchijun1961@163.com        通讯作者:黄海龙(1979—),男,工程师,研究领域为固体火箭发动机设计。

Diagnosis of Transient End Burning Law for Gas Generator with Low Burning Velocity Fuel Rich Propellant

  1. Tianjin Delegate Station of Navy Armaments Department,Beijing 100073,China,Beijing Power Machinery Institute,Beijing 10074,China,Beijing Power Machinery Institute,Beijing 10074,China,Beijing Power Machinery Institute,Beijing 10074,China; Science and Technology on Scramjet Laboratory,Beijing Power Machinery Institute,Beijing 100074,China,Beijing Power Machinery Institute,Beijing 10074,China,Beijing Power Machinery Institute,Beijing 10074,China and Science and Technology on Combustion,Internal Flow and Thermal-Structure Laboratory,Northwestern Polytechnical University,Xi’an 710072,China
  • Published:2021-08-15

摘要: 为了探索冲压发动机用低燃速贫氧推进剂燃气发生器端面燃烧的规律,采用X射线荧屏分析技术对全尺寸燃气发生器端面燃烧规律进行了诊断研究。试验成功采集了燃气发生器药柱燃面随时间的退移图像,图像数据表明低燃速贫氧推进剂药柱沿轴线方向以近似“三维”锥面体进行退移,在45s左右逐渐形成相对稳定的锥顶角68.5°。试验数据还表明,锥面效应一方面引起燃气发生器药柱燃速由1.60mm/s增大到1.80mm/s;另一方面引起装药燃烧室压强由初始平衡压强0.89MPa爬升到最大工作压强1.75MPa。工作结束后喷管喉径固体线性沉积率为2.68μm/s。

关键词: 低燃速;贫氧推进剂;端面燃烧;动态诊断研究;燃气发生器;冲压发动机

Abstract: In order to explore transient end burning law for gas generator with low burning velocity fuel-rich propellant used in ramjet,transient diagnosis research is conducted in the full-scale gas-generator with X-ray screen analytical technique by which the grain end burning images are obtained successfully in the experiment. Images show that end burning of approximative 3D conical body shrinks back along the center axis direction. The near constant cone angle is 68.5° that begins to be formed at 45s. The test data also show that the conical burning action increases the grain burning velocity from 1.60mm/s to 1.80mm/s,while it increases the chamber pressure from 0.89MPa to 1.75MPa. Solid linear deposition rate of nozzle throat is 2.68μm/s after working. Diagnostic research of gas generator end burning law is obtained.

Key words: Low burning velocity;Fuel-rich propellant;End burning;Transient diagnosis research;Gas generator;Ramjet engine