非正交界面下的插值耦合传热方法

推进技术 ›› 2016, Vol. 37 ›› Issue (1): 90-97.

非正交界面下的插值耦合传热方法

刘锐,陈雄,周长省,李映坤

南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094

发布日期:2021-08-15
作者简介:刘锐，男，博士生，研究领域为航空宇航推进系统热防护工程。

Development of Interpolation Method for Conjugate Heat Transfer in Non-Orthogonal Interfaces

School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China and School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China

Published:2021-08-15

摘要/Abstract

摘要： 针对复杂热防护结构，开发了一种求解非正交性流/固界面的耦合传热程序。流体和固体区域采用同一积分、守恒型的RANS(Reynolds-Averaged Navier-Stock)方程，通过有限体积法进行离散求解。为了保证非正交界面上的温度和热流密度连续，提出了一种结合网格周边信息计算界面热流密度的插值方法。利用该插值耦合方法模拟了双层复合平板和喷管的热传导。数值结果表明:该插值方法在空间上具有2阶精度；喷管壁面上的对流换热系数沿轴向先增大后减小，在喉部上游达到最大值，当喷管入口压力增加3.38倍时，对流换热系数的最大值相应增加了3.13倍；喉衬与壳体界面上温度的计算值和试验结果存在一定差异，这是由于本文数值计算未考虑接触热阻引起的。

关键词: 耦合传热；非正交界面；插值算法；喷管

Abstract: A conjugate heat transfer (CHT) code has been developed for the complex thermal protection structures with non-orthogonal fluid/solid interfaces. Both fluid- and solid- domains employ the integral and conservative form of the Reynolds-Averaged Navier-Stock(RANS) equations，which are discretized by means of the finite volume scheme. To keep the heat flux and temperature consistent on the non-orthogonal interface，a coupling strategy using the interpolation of information from neighboring cells was proposed to calculate the heat flux on the interface. The heat conduction problems of a two-layer composite slap and nozzles were simulated using the interpolation coupling method. The numerical results indicate that the proposed interpolation method is of 2nd order accuracy in the space. The heat transfer coefficients on the nozzle wall increase and then decrease along the axial direction，reaching maximum values in the upstream of the throat. When the nozzle inlet pressure increases by 3.38 times，the maximum value of heat transfer coefficient increases by 3.13 times，accordingly. The temperature numerical results and experimental data show some differences on the interface between the insert and nozzle housing，which is caused by the neglect of the thermal contact resistance in the current simulation.

Key words: Conjugate heat transfer；Non-orthogonal interfaces；Interpolation method; Nozzles

刘锐,陈雄,周长省,李映坤. 非正交界面下的插值耦合传热方法[J]. 推进技术, 2016, 37(1): 90-97.

LIU Rui,CHEN Xiong,ZHOU Chang-sheng,LI Ying-kun. Development of Interpolation Method for Conjugate Heat Transfer in Non-Orthogonal Interfaces[J]. Journal of Propulsion Technology, 2016, 37(1): 90-97.

参考文献

[1] Qiang W,Zhaoyuan G, Chi Z, et al. Coupled Heat Transfer Simulation of a High-Pressure Turbine Nozzle Guide Vane[J]. Chinese Journal of Aeronautics, 2009, 22(3): 230-236.
[2] 何洪庆. 固体火箭喷管烧蚀和传热的基本问题[J]. 推进技术, 1993, 14(3): 22-28. (HE Hong-qing. Some Essential Problems with Ablation and Heat-Conduction in Solid Rocket Nozzle[J]. Journal of Propulsion Technology, 1993, 14(3): 93-97.)
[3] 陈超群, 徐旭. 加热器喷管热-流耦合传热分析[J]. 北京航空航天大学学报, 2010 (5): 592-595.
[4] 张兵, 韩景龙. 多场耦合计算平台与高超声速热防护结构传热问题研究[J]. 航空学报, 2011, 32(3): 400-409.
[5] 张晓光, 王长辉, 刘宇, 等. 固体火箭发动机喉衬流场及热结构耦合分析[J]. 固体火箭技术, 2011, 34(5): 579-583.
[6] Hongjun Z, Zhengping Z, Yu L, et al. Conjugate Heat Transfer Investigations of Turbine Vane Based on Transition Models[J]. Chinese Journal of Aeronautics, 2013, 26(4): 890-897.
[7] Duchaine F, Corpron A, Pons L, et al. Development and Assessment of a Coupled Strategy for Conjugate Heat Transfer with Large eddy Simulation: Application to a Cooled Turbine Blade[J]. International Journal of Heat and Fluid Flow, 2009, 30(6): 1129-1141.
[8] Roe B, Jaiman R, Haselbacher A, et al. Combined Interface Boundary Condition Method for Coupled Thermal Simulations[J]. International Journal for Numerical Methods in Fluids, 2008, 57(3): 329-354.
[9] Kanna P R, Das M K. Conjugate Forced Convection Heat Transfer from a Flat Plate by Laminar Plane Wall Jet Flow[J]. International Journal of Heat and Mass Transfer, 2005, 48(14): 2896-2910.
[10] Fife M E, Davis R L. A Conjugate Heat Transfer RANS/DES Simulation Procedure[R]. AIAA 2009-913.
[11] 黄宏艳, 王强. 轴对称喷管内外流场与结构温度场耦合计算[J]. 推进技术, 2008, 29(2): 194-198. (HUANG Hong-yan, WANG Qiang. Coupled Numerical Study of flow Field and Heated Structure for Axisymmetic Nozzles[J]. Journal of Propulsion Technology, 2008, 29(2): 194-198.)
[12] Liu Q Y, Luke E A, Cinnella P. Coupling Heat Transfer and Fluid Flow Solvers for Multidisciplinary Simulations[J]. Journal of Thermophysics and Heat Transfer, 2005, 19(4): 417-427.
[13] Henshaw W D, Chand K K. A Composite Grid Solver for Conjugate Heat Transfer in Fluid–Structure Systems[J]. Journal of Computational Physics, 2009, 228(10): 3708-3741.
[14] Pacheco J R, Pacheco-Vega A, Rodi T, et al. Numerical Simulations of Heat Transfer and Fluid Flow Problems Using an Immersed-Boundary Finite-Volume Method on Nonstaggered Grids[J]. Numerical Heat Transfer, Part B: Fundamentals, 2005, 48(1): 1-24.
[15] Pan D. An Immersed Boundary Method on Unstructured Cartesian Meshes for Incompressible Flows with Heat Transfer[J]. Numerical Heat Transfer, Part B: Fundamentals, 2006, 49(3): 277-297.
[16] Kim J, Choi H. An Immersed-Boundary Finite-Volume Method for Simulation of Heat Transfer in Complex Geometries[J]. ASME International Journal, 2004, 18(6): 1026-1035.
[17] Menter F R. Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications[J]. AIAA Journal, 1994, 32(08): 1598–1605.
[18] Back L H, Massier P F, Gier H L. Convective Heat Transfer in a Convergent-Divergent Nozzle[J]. International Journal of Heat and Mass Transfer, 1964, 7: 549-568.
[19] Lee R E. Heat Transfer to the Throat Region of a Solid Propellant Rocket Nozzle[R]. USA: Navy Ordinance Laboratory Technical Report (NOLTR), 62-72.
[20] Holman J P. Heat Transfer(10 Edition) [M]. USA: McGraw-Hill Education, 2010.(编辑:史亚红)　　　　　　　　　　　　　*　收稿日期:2014-09-20；修订日期:2014-11-03。作者简介:刘锐,男,博士生,研究领域为航空宇航推进系统热防护工程。E-mail: weaponliurui@163.com