横向热气流中单液滴剪切破碎特性研究

推进技术 ›› 2016, Vol. 37 ›› Issue (10): 1928-1937.

横向热气流中单液滴剪切破碎特性研究

金仁瀚¹,刘勇²,王锁芳²

盐城工学院车辆工程学院，江苏盐城 224001,南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016

发布日期:2021-08-15
作者简介:金仁瀚，男，博士，讲师，研究领域为航空发动机燃烧室燃油雾化。

Experimental Investigations of Breakup Characteristic

College of Autormotive Engineening，Yancheng Institute of Technology，Yancheng 224001，China,Nanjing University of Aeronautics and Astronautics，Jiangsu Province Key Laboratory of Aerospace Power System，Nanjing 210016，China and Nanjing University of Aeronautics and Astronautics，Jiangsu Province Key Laboratory of Aerospace Power System，Nanjing 210016，China

Published:2021-08-15

摘要/Abstract

摘要： 为了获得热气流中单液滴剪切破碎特性，采用高速摄像机对液滴变形、破碎过程进行了捕获。结果表明:液滴初始直径减小、气流温度增加，降低了液滴发生剪切破碎所需最小气动力；液滴破碎特征时间，随气动力增加呈线性递减变化趋势，且其值与变化梯度都随液滴初始直径增加而增大；液滴破碎区域面积、子液滴质量百分数随气动力增加呈先增加后减小的变化趋势，液滴初始直径增加，液滴破碎区域面积随之增加，而子液滴质量百分数则随之减小；剪切破碎锥角，随气动力增加呈线性减小的变化趋势；液滴破碎程度随液滴初始直径增加有明显改善；标准离差率数学模型可以用于子液滴群空间分布均匀性方面的研究。

关键词: 液滴破碎；雾化；热气流；喷雾；高速摄像机

Abstract: In order to obtain characteristics of single droplet deformation and breakage in a continuous and uniform heating air flow，the high-speed cameras was applied to measure single droplet deformation and breakage. Experimental results show that the reduction on original diameters of droplet and the increase on airflow temperature both could decrease the minimum requirements of aerodynamic force on the sheet-thinning breakup. The character time of droplet breakup has a negative relationship with the aerodynamics，while its value and change gradient are both positively associated with the original droplet diameter. The area of droplet breakup and the percentage of sub-droplet quality increase firstly but then change to decrease with the increase of aerodynamics. The area of droplet breakup increases as the increase of original diameters，but at the same time the percentage of sub-droplet quality decreases. The broken cone angle of sheet-thinning has a negative linear relationship with the aerodynamics. The level of droplet breakup is significantly improved as the increase of droplet original diameter. The standard deviation rate model can be applied on the study of the uniformity of sub-droplets space distribution.

Key words: Droplet breakup；Atomization；Heated air flow；Sprays；High-speed cameras

金仁瀚,刘勇,王锁芳. 横向热气流中单液滴剪切破碎特性研究[J]. 推进技术, 2016, 37(10): 1928-1937.

JIN Ren-han¹,LIU Yong²,WANG Suo-fang². Experimental Investigations of Breakup Characteristic[J]. Journal of Propulsion Technology, 2016, 37(10): 1928-1937.

参考文献

[1] Dai Z, Faeth G M. Temporal Properties of Secondary Drop Breakup in the Multimode Breakup Regime[J]. International Journal of Multiphase Flow, 2001, 27: 217-236.
[2] Hui Zhao, Hai-Feng Liu , Xian-Kui Cao, et al. Breakup Characteristics of Liquid Drops in Bag Regime by a Continuous and Uniform Air Jet Flow[J]. International Journal of Multiphase Flow, 2011, 37: 530-534.
[3] Guildenbecher D R, Lopez-Rivera C, Sojka P E. Secondary Atomization[J]. Experiments in Fluids, 2009, 46, 371-402.
[4] Ranger A A, Nicholls J A. Aerodynamic Shattering of Liquid Drops[J]. AIAA Journal, 1969, 7(2): 285-290.
[5] Liu Z, Reitz R D. An Analysis of the Distortion and Breakup Mechanisms of High Speed Liquid Drops[J]. International Journal of Multiphase Flow, 1997, 23(4):631-650.
[6] Chou W H, Hsiang L P, Faeth G M. Temporal Properties of Drop Breakup in the Shear Breakup Regime[J]. International Journal of Multiphase Flow, 1997, 23(4):651-669.
[7] Igra D, Takayama K. Investigation of Aerodynamic Breakup of a Cylindrical Water Droplet[J]. Atomization Spray, 2001, 11(2): 167-185.
[8] Igra D, Ogawa T, Takayama K. A Parametric Study of Water Column Deformation Resulting from Shock Wave Loading[J]. Atomization Spray, 2002, 12: 577-591.
[9] Lee C H, Reitz R D. An Experimental Study of the Effect of Gas Density on the Distortion and Breakup Mechanism of Drops in High Speed Gas Stream[J]. International Journal of Multiphase Flow, 2000, 26: 229-244.
[10] Lee C H, Reitz R D. Modeling the Effects of Gas Density on the Drop Trajectory and Breakup Size of High-speed Liquid Drops[J]. Atomization Spray, 1999, 9:497-517.
[11] Lee C S, Reitz R D. Effect of Liquid Properties on the Breakup Mechanism of High-Speed Liquid Drops[J]. Atomization Spray, 2001, 11: 1-19.
[12] Khosla S, Smith C E, Throckmorton R P. Detailed Understanding of Drop Atomization by Gas Crossflow Using the Volume of Fluid Method[C]. Toronto, Canada: ILASS Americas, 19th Annual Conference on Liquid Atomization and Spray Systems, 2006.
[13] Simmons H C. The Correlation of Drop-Size Distributions in Fuel Nozzle Sprays, Part I: The Drop-Size/Volume-Fraction Distribution[J]. Journal of Engineering for Gas Turbines and Power, 1977, 99(3): 309-314.
[14] 冯守义, 牛志刚, 费立群, 等. 高密度烃燃料雾化特性试验[J]. 推进技术, 2011, 32(4): 512-519. (FENG Shou-yi, NIU Zhi-gang, FEI Li-qun, et al. Experiment on Atomization Characteristics of High Density Hydrocarbon[J]. Journal of Propulsion Technology, 2011, 32(4): 512-519.)
[15] 金仁瀚, 张铮, 刘勇, 等. 横向加热气流中直射式喷嘴侧喷雾化特性研究[J]. 推进技术, 2013, 34(5): 658-663. (JIN Ren-han,ZHANG Zheng, LIU Yong, et al. Experimental Study on Atomization Characteristics of Simple Nozzle in Heating Cross Flow [J]. Journal of Propulsion Technology, 2013, 34(5):658-663.)
[16] 杨淑莹. VC++图像处理程序设计[M]. 北京:清华大学出版社, 2005.
[17] 金仁瀚, 刘勇, 朱冬清, 等. 连续均匀气流中单液滴破碎特性试验[J]. 推进技术, 2016, 37(2). (JIN Ren-han, LIU Yong, ZHU Dong-qing, et al. Experimental Investigations of Breakup Characteristic of Single Droplet in the Continuous Uniform Airflow[J]. Journal of Propulsion Technology, 2016, 37(2).)
[18] Chou W H, Faeth G M. Temporal Properties of Secondary Drop Breakup in the Bag Breakup Regime[J]. International Journal of Multiphase Flow, 1998, 24: 889-912.
[19] 金仁瀚, 刘勇, 冯志鹏, 等. 双旋流燃烧室单头部油雾特性实验研究[J]. 航空动力学报, 2014, 29(2):250-258.　　　　　　　　　　　　　*　收稿日期:2015-06-01；修订日期:2015-07-28。作者简介:金仁瀚,男,博士,讲师,研究领域为航空发动机燃烧室燃油雾化。E-mail: kingrenhan@163.com(编辑:朱立影)