小尺度通道多孔介质表面火焰边界的实验研究

推进技术 ›› 2016, Vol. 37 ›› Issue (2): 311-316.

小尺度通道多孔介质表面火焰边界的实验研究

林培华,林宇震,薛鑫,张良,张弛

北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室，北京 100191,北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室，北京 100191,北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室，北京 100191,北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室，北京 100191,北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室，北京 100191

发布日期:2021-08-15
作者简介:林培华，男，博士生，研究领域为航空发动机燃烧室研究。

Experimental Investigation for Boundary of Surface-Stabilized Flame on a Porous Media in a Mesoscale Channel

National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics， School of Energy and Power Engineering，Beihang University，Beijing 100191，China,National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics， School of Energy and Power Engineering，Beihang University，Beijing 100191，China,National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics， School of Energy and Power Engineering，Beihang University，Beijing 100191，China,National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics， School of Energy and Power Engineering，Beihang University，Beijing 100191，China and National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics， School of Energy and Power Engineering，Beihang University，Beijing 100191，China

Published:2021-08-15

摘要/Abstract

摘要： 为了更好地在小尺度燃烧室中组织燃烧，对小尺度环形通道内多孔介质表面甲烷与空气预混火焰开展了流量和雷诺数边界特性实验研究。多孔介质采用了烧结金属粉末材料，燃烧在石英玻璃管和不锈钢管以及多孔介质组成的小尺度环形通道中进行。研究结果表明:随着预混气流量的增加，环形通道内的火焰形态由多孔介质表面火焰向推举火焰衍变，与推举火焰相比，多孔介质表面火焰更适合于在微小型燃烧室内组织燃烧。稳态预混气温度随流量的增加先上升后下降，其流量范围与两个火焰形态的基本重合，可以将温度的转折点作为表面火焰边界的定量判据。对于多孔介质表面火焰流量边界而言，当量比小于1.0时，甲烷预混气的表面火焰流量边界随着当量比的增大逐渐变宽；当量比大于1.0时，随着当量比的增大，多孔介质表面火焰流量边界变窄。对于多孔介质表面火焰雷诺数边界而言，随着当量比的增大，雷诺数边界逐渐变宽。

关键词: 小尺度燃烧；多孔介质；表面火焰；预混燃烧；环形通道；实验研究

Abstract: To achieve well-organized combustion in mesoscale combustors，the mass flow and Reynold boundary of surface-stabilized flame on a porous media in an annular mesoscale channel was studied experimentally with methane-air premixture. The porous media is composed of sintered metal powder. The combustion was carried out in the mesoscale annular channel formed by a quartz glass tube，a stainless steel tube and the porous media. The experimental results indicate that the flame in the annular channel evolves from surface-stabilized flame on the porous media to lift-off flame in the channel with the increasing mass flow of the premixed gas. Compared with the lift-off flame，the surface-stabilized flame on the porous media is more suitable for the mesoscale combustion. The steady temperature of the premixed gas drops after the first rise with the increasing flow of the premixed gas. The flow range concides with that of the two flame shapes on the whole，so the turning point of the temperature is adopted as the quantitative criterion for the flow boundary of the surface-stabilized flame. As to the mass flow boundary of the surface-stabilized flame on the porous media，when the equivalent ratio is less than 1.0，the boundary is gradually widened with increasing equivalent ratio. When the equivalent ratio is greater than 1.0，the boundary is narrowed with increasing equivalent ratio. As for the Reynold boundary of the surface-stabilized flame on the porous media，the boundary is gradually widened with increasing equivalent ratio.

Key words: Mesoscale combustion；Porous media；Surface-stabilized flame；Premixed combustion；Annular channel；Experimental investigation

林培华,林宇震,薛鑫,张良,张弛. 小尺度通道多孔介质表面火焰边界的实验研究[J]. 推进技术, 2016, 37(2): 311-316.

LIN Pei-hua,LIN Yu-zhen,XUE Xin,ZHANG Liang,ZHANG Chi. Experimental Investigation for Boundary of Surface-Stabilized Flame on a Porous Media in a Mesoscale Channel[J]. Journal of Propulsion Technology, 2016, 37(2): 311-316.

参考文献

[1] Chou S K, Yang W M, Chua K J, et al. Development of Micro Power Generators-A Review[J]. Applied Energy, 2011, 88(1): 1-16.
[2] Fernandez-Pello AC. Micropower Generation Using Combustion-Issues and Approaches[J]. Proceedings of the Combustion Institute, 2002, 29(1): 883-99.
[3] Ju Y, Maruta K. Microscale Combustion: Technology Development and Fundamental Research[J]. Progress in Energy and Combustion Science, 2011, 37(6): 669-715.
[4] Shirsat V, Gupta A K. A Review of Progress in Heat Recirculating Meso-Scale Combustors[J]. Applied Energy, 2011, 88(12): 4294-309.
[5] Kaisare N S, Vlachos D G. A Review on Microcombustion: Fundamentals, Devices and Applications[J]. Progress in Energy and Combustion Science, 2012, 38(3): 321-59.
[6] Zhong B-J, Wang J-H. Experimental Study on Premixed CH4/Air Mixture Combustion in Micro Swiss-Roll Combustors[J]. Combustion and Flame, 2010,157(12).
[7] Badra, Jihad Ahmad, Masri, et al. Catalytic Combustion of Selected Hydrocarbon Fuels on Platinum: Reactivity and Hetero-Homogeneous Interactions[J]. Combustion and Flame, 2012, 159(2): 817-834.
[8] Mujeebu M A, Abdullah M Z, Bakar M Z A, et al. Applications of Porous Media Combustion Technology-A Review[J]. Applied Energy, 2009, 86(9).
[9] 蒋利桥, 赵黛青, 汪小憨, 等. 新型低热损失微燃烧器原型的实验研究[J]. 热能动力工程, 2008, 23(1).
[10] Li J, Chou S K, Li Z W, et al. Experimental Investigation of Porous Media Combustion in a Planar Micro-Combustor[J]. Fuel, 2010, 89(3): 708-715.
[11] Mcintosh A C. A Model of Large Heat Transfer Surface Combustion with Radiant Heat Emission[J]. Combustion and Flame, 1991, 83(2): 111-126.
[12] Diamantis D J, Mastorakos E, Goussis D A. Simulations of Premixed Combustion in Porous Media[J]. Combustion Theory Model, 2002, 6(3): 383-411.
[13] 赵平辉, 叶桃红, 姜海, 等. 多孔介质内火焰传播与驻定机理的研究[J]. 中国科学:E辑, 2008, 38(5):746-754.
[14] 王勇, 蒋利桥, 赵黛青, 等. 多孔介质表面火焰的燃烧特性[J]. 中国电机工程学报, 2009, 29(29): 67-71.
[15] Timothy L Marbach, Ajay K Agrawal. Investigation of a Miniature Combustor Using Porous Media Surface Stabilized Flame[J]. Combustion Science and Technology, 2007, 179(9): 1901-1922.
[16] 张龙, 许全宏, 张弛, 等. 多孔介质表面预混火焰熄火特性的实验研究[J]. 航空动力学报, 2014, 29(4): 801-806.
[17] 张龙, 许全宏, 张弛, 等. 多孔介质结构参数对表面火焰熄火特性的影响[J]. 航空动力学报, 2014,29(7): 1654-1659.
[18] 张龙, 许全宏, 张弛, 等. 限制域、预混气初始温度对多孔介质表面火焰熄火特性的影响[J]. 航空动力学报, 2014, 29(6): 1358-1362.
[19] 奚正平, 汤慧萍. 烧结金属多孔材料[M]. 北京:冶金工业出版社, 2009.
[20] 林建忠. 流体力学第2版[M]. 北京:清华大学出版社, 2013(07).
[21] 张家荣, 赵廷元. 工程常用物质的热物理性质手册[M]. 北京:新时代出版社, 1987.
[22] 孙维清, 王建中. 流量测量节流装置设计手册第2版[M]. 北京:化学工业出版社, 2005.
[23] 杨世铭, 陶文铨. 传热学第4版[M]. 北京:高等教育出版社, 2006.
[24] 魏凯丰, 宋少英, 张作群. 天然气混合气体粘度和雷诺数计算研究[J]. 计量学报, 2008, 29(3). (编辑:史亚红)　　　　　　　　　　　　　*　收稿日期:2014-02-10；修订日期:2015-04-16。作者简介:林培华,男,博士生,研究领域为航空发动机燃烧室研究。E-mail: biwolin_007@sina.com