基于拟动力学方法的反转圆柱滚子轴承动力学特性研究

推进技术 ›› 2016, Vol. 37 ›› Issue (2): 354-361.

基于拟动力学方法的反转圆柱滚子轴承动力学特性研究

任国哲,刘振侠,高文君,吕亚国,钟冲

西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129

发布日期:2021-08-15
作者简介:任国哲，男，博士，研究领域为航空发动机润滑系统性能分析与实验。E-mail: renguozhe7917@163.com 通讯作者:刘振侠，男，博士，教授，研究领域为航空发动机润滑系统、空气系统等。
基金资助:
航空科学基金(20090453006)。

Research on Dynamic Behaviors of Counter-Rotating Cylindrical Roller Bearing Based on Quasi-Dynamic Method

School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China and School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China

Published:2021-08-15

摘要/Abstract

摘要： 反转圆柱滚子轴承的性能直接影响着航空发动机工作的稳定性与可靠性。为了研究反转圆柱滚子轴承动力学特性，基于弹性流体动力润滑和流体动压润滑等理论，采用拟动力学分析方法，建立了反转圆柱滚子轴承动力学计算模型。利用该计算模型对滚子打滑率进行了验证计算，随着径向载荷的增加，计算值由7%减小至2%，与实验值吻合较好。同时，对反转圆柱滚子轴承动力学进行计算分析，研究了动态运转中轴承的载荷和速度分布，以及不同工作状态对轴承打滑率的影响。研究表明，倒装时反转圆柱滚子轴承承载区滚子受载比顺装更均匀，但非承载区滚子及保持架打滑率比顺装更严重。

关键词: 航空发动机；中介支撑；反转圆柱滚子轴承；拟动力学分析

Abstract: The characteristics of the counter-rotating cylindrical roller bearing directly affect the stability and reliability of the aero-engine. In order to study dynamic behaviors of counter-rotating cylindrical roller bearing，based on elasto-hydrodynamic lubrication theory，hydrodynamic lubrication theory as well as the quasi-dynamic analysis method，a new quasi-dynamic model of the counter-rotating cylindrical roller bearing is established. And then，this model is utilized to verify rollers sliding ratio. As the radial load increases，the calculated values decrease from 7% to 2%，which agree well with the experimental data. Moreover，the model is used to calculate and analyze the dynamic behaviors of counter-rotating cylindrical roller bearing. The distribution of dynamic load and rotating speed of the counter-rotating bearing is studied in operation and the rotating sliding ratio of the counter-rotating bearing is discussed in different conditions. Results show that the load distribution in the loaded zone is more even in the inverted configuration than it in the natural configuration，while the slipping of the rollers in the unloaded zone and the cage is more serious in the inverted configuration.

Key words: Aircraft engine；Intershaft support；Counter-rotating cylindrical roller bearing；Quasi-dynamic analysis

任国哲,刘振侠,高文君,吕亚国,钟冲. 基于拟动力学方法的反转圆柱滚子轴承动力学特性研究[J]. 推进技术, 2016, 37(2): 354-361.

REN Guo-zhe,LIU Zhen-xia,GAO Wen-jun,LV Ya-guo,ZHONG Chong. Research on Dynamic Behaviors of Counter-Rotating Cylindrical Roller Bearing Based on Quasi-Dynamic Method[J]. Journal of Propulsion Technology, 2016, 37(2): 354-361.

参考文献

[1] 季路成. 对转涡轮研究的回顾与展望[J]. 航空发动机, 2006, 32(4): 49-53.
[2] Gamble W L, Valori R. Development of Counter-rotating Intershaft Support Bearing Technology for Aircraft Gas Turbine Engines[R]. AIAA 82-1054.
[3] Hooker S. History of the Pegasus Vectored Thrust Engine[J]. Journal of Aircraft, 1981, 18(5): 322-326.
[4] 方昌德. 航空发动机的发展前景[J]. 航空发动机, 2004, 30(1): 1-5.
[5] Bill Crecelius. Counter-Rotating Differential Cylindrical Roller Bearing Development[R]. AIAA 87-1843.
[6] Zhong Chong, Hu Jian-ping, Liu Zhen-xia, et al. Application of the Ultrasonic Oil Film Thickness Measurement System in Bearing Chambers[J]. International Journal of Turbo & Jet-Engines, 2007,31(2): 159-165.
[7] 钟冲, 刘振侠, 胡剑平, 等. 轴承腔壁面油膜厚度超声测量系统的实验研究[J]. 推进技术, 2014, 35(8):1110-1115. (ZHONG Chong, LIU Zhen-xia, HU Jian-ping, et al. Experimental Study of the Ultrasonic Oil Film Thickness Measurement System in the Bearing Chamber[J]. Journal of Propulsion Technology, 2014, 35(8): 1110-1115.)
[8] 赵静宇, 刘振侠, 胡剑平, 等. 轴承腔内壁油膜运动特性的数值研究[J]. 推进技术, 2014, 35(1): 25-32. (ZHAO Jing-yu, LIU Zhen-xia, HU Jian-ping, LV Ya-guo. Numerical Study on Motion Characteristics of Lubricating Oil Film of Bearing Chamber Wall[J]. Journal of Propulsion Technology, 2014, 35(1): 25-32.)
[9] 胡绚, 罗贵火, 高德平. 圆柱滚子中介轴承拟静力学分析[J]. 航空动力学报, 2006, 21(6): 1069-1074.
[10] 胡绚, 罗贵火, 高德平. 航空发动机中介轴承的特性分析[J]. 航空动力学报, 2007, 22(3): 439-443.
[11] 林国昌, 徐从儒, 林基恕. 滚动轴承准静态分析[J]. 航空动力学报, 1992, 7(1): 17-21.
[12] 万长森. 滚动轴承的分析方法[M]. 北京:机械工业出版社, 1987.
[13] Johnson K L, Tevaarwerk J L. Shear Behavior of Elastohydrodynamic Oil Films[J]. Proceedings of the Royal Society of London Archives, 1977, 356(1685): 215-236.
[14] Biboulet N, Houpert L. Hydrodynamic Force and Moment in Pure Rolling Lubricated Contacts. Part 1: Line Contacts[J]. Proceedings of the Institution of Mechanical Engineers, 2010, 224(8): 765-779.
[15] Thomas F Conry. Transient Dynamic Analysis of High-Speed Lightly Loaded Cylindrical Roller Bearings 1-Analysis[R]. NASA Contractor Report, 1981.
[16] Frene J, Nicolas D, Degueurce B, et al. Hydrodynamic Lubrication, Journal and Thrust Bearings[M]. Paris: Eyrolles, 1990.
[17] Schlichting H. Boundary-Layer Theory [M]. New York: McGraw-Hill Book Company, 1979.
[18] Harris T A, Kotzalas M N. Advanced Concepts of Bearing Technology[M]. ISBN: 9780-8493-7182-0.
[19] Alexandre Leblanc, Daniel Nelias. Nonlinear Dynamic Analysis of Cylindrical Roller Bearing with Flexible Rings[J]. Journal of Sound and Vibration, 2009, 325(1): 145-160.
[20] Gabriel Cavallaro, Daniel Nelias. Analysis of High-Speed Intershaft Cylindrical Roller Bearing with Flexible Rings[J]. Tribology Transactions, 2005, 48(2): 154-164.　　　　　　　　　　　　　*　收稿日期:2014-11-10；修订日期:2015-01-09。基金项目:航空科学基金(20090453006)。作者简介:任国哲,男,博士,研究领域为航空发动机润滑系统性能分析与实验。E-mail: renguozhe7917@163.com通讯作者:刘振侠,男,博士,教授,研究领域为航空发动机润滑系统、空气系统等。E-mail: zxliu@nwpu.edu.cn(编辑:梅瑛)