超声速等离子喷涂颗粒加热熔化与细化过程分析

推进技术 ›› 2016, Vol. 37 ›› Issue (5): 930-936.

超声速等离子喷涂颗粒加热熔化与细化过程分析

谭超¹,魏正英¹,魏培¹,刘伯林¹,韩志海²

西安交通大学机械制造系统国家重点实验室，陕西西安 710049,西安交通大学机械制造系统国家重点实验室，陕西西安 710049,西安交通大学机械制造系统国家重点实验室，陕西西安 710049,西安交通大学机械制造系统国家重点实验室，陕西西安 710049,西安交通大学材料科学与工程学院，陕西西安 710049

发布日期:2021-08-15
作者简介:谭超，男，硕士生，研究领域为等离子喷涂过程。E-mail: wtanchao@stu.xjtu.edu.cn 通讯作者:魏正英，女，教授，博导，研究领域为数字化产品开发与快速制造。
基金资助:
国防“九七三”资助项目(613112-K3)；西安交通大学金属材料强度国家重点实验室开放研究项目(20131310)。

Analysis of Melting and Refining Process of Supersonic Plasma Spraying Particles

State Key Laboratory of Manufacturing Systems Engineering，Xi’an Jiaotong University，Xi’an 710049，China,State Key Laboratory of Manufacturing Systems Engineering，Xi’an Jiaotong University，Xi’an 710049，China,State Key Laboratory of Manufacturing Systems Engineering，Xi’an Jiaotong University，Xi’an 710049，China,State Key Laboratory of Manufacturing Systems Engineering，Xi’an Jiaotong University，Xi’an 710049，China and School of Material Science and Engineering，Xi’an Jiaotong University，Xi’an 710049，China

Published:2021-08-15

摘要/Abstract

摘要： 针对超声速等离子喷涂过程中颗粒撞击基体前熔化状态未知的问题，利用数值计算方法分析了单个颗粒在超声速气流中的加热熔化过程，并对颗粒的破碎细化行为进行了探究。计算考虑颗粒内部相变后，得到不同时刻颗粒内部的温度分布更加合理，通过分析得到了颗粒熔化界面随加热时间的变化曲线，其在0.35ms时完全熔化，这与实验分析结果相符。熔融颗粒在进入到高温高速等离子体射流中粒径会迅速减小，统计得到100mm处小于5μm的颗粒所占比例最大，超过了50%，与实验收集粒子的粒度分布一致。

关键词: 超声速等离子喷涂；颗粒；熔化状态；破碎细化

Abstract: To solve the problem of unknown molten status of particles before striking the substrate in supersonic plasma spraying process，individual particle heating and melting process in supersonic flow was studied using numerical methods，and particle broken and refining behavior was explored. After considering the phase transition inside the particle in the calculation，the temperature distribution at different time was more reasonable. The curve of particle melting interface changing over the heating time was obtained. Particles were completely melted at the time of 0.35ms，which was consistent with experimental results. When molten particles injected into high-temperature and high-velocity plasma jet，their diameter decreased sharply. The statistic at the distance of 100mm showed particles smaller than 5μm made up a significant proportion，which was more than 50% and consistent with the particle size distribution by particles collected experiment.

Key words: Supersonic plasma spray；Particle；Molten status；Broken refinement

谭超,魏正英,魏培,刘伯林,韩志海. 超声速等离子喷涂颗粒加热熔化与细化过程分析[J]. 推进技术, 2016, 37(5): 930-936.

TAN Chao¹,WEI Zheng-ying¹,WEI Pei¹,LIU Bo-lin¹,HAN Zhi-hai². Analysis of Melting and Refining Process of Supersonic Plasma Spraying Particles[J]. Journal of Propulsion Technology, 2016, 37(5): 930-936.

参考文献

[1] 韩志海, 王海军, 白宇,等.超音速等离子喷涂制备细密柱晶结构热障涂层研究进展[J].热喷涂技术, 2011, 3(2): 1-14.
[2] Bai Y, Han Z H, Li H Q, et al. Structure-Property Differences Between Supersonic and Conventional Atmospheric Plasma Sprayed Zirconia Thermal Barrier Coatings[J]. Surface and Coatings Technology, 2011, 205 (13-14): 3833-3839.
[3] He J, Ice M, Lavemia E. Particle Melting Behavior During High-Velocity Oxygen Fuel Thermal Spraying[J]. Journal of Thermal Spray Technology, 2001, 10(1): 83-93.
[4] 韩志海, 王海军, 白宇, 等. 喷涂粒子在等离子体射流中的加热历程及熔化状态研究[J]. 热喷涂技术, 2012, 4(2): 35-43.
[5] Dyshlovenko S, Pateyron B, Pawlowski L, et al. Numerical Simulation of Hydroxyapatite Powder Behavior in Plasma Jet[J]. Surface & Coatings Technology, 2004, 179(1): 110-117.
[6] Ahmed I, Bergman T L. Optimization of Plasma Spray Processing Parameters for Deposition of Nanostructured Powders for Coating Formation[J]. Journal of Fluids Engineering-Transactions of the ASME, 2006, 128(2):394-401.
[7] Li L, Vaidya A, Sampath S. Particle Characterization and Splat Formation of Plasma Sprayed Zirconia[J]. Journal of Thermal Spray Technology, 2006, 15(1): 97-105.
[8] Zhang H, Wei G, Zheng L, et al. Numerical and Experimental Studies of Substrate Melting and Re-Solidification during Thermal Spraying[J]. Journal of Materials Science & Technology, 2003, 19: 137-140.
[9] Xiong H B, Zheng L L, Streibl T, et al. A Critical Assessment of Particle Temperature Distributions During Plasma Spraying: Numerical Studies for YSZ[J]. Plasma Chemistry and Plasma Processing, 2006, 26(1): 53-72.
[10] Xiong H B, Zheng L L, Li L, et al. Melting and Oxidation Behavior of in-Flight Particles in Plasma Spray Process[J]. International Journal of Heat and Mass Transfer, 2005, 48(25-26): 5121-5133.
[11] Joseph D D, Belanger J, Beavers G S. Breakup of a Liquid Drop Suddenly Exposed to a High-Speed Airstream[J]. International Journal of Multiphase Flow, 1999, 25(6-7): 1263-1303.
[12] Zhao W T, Wu J H, Bai Y, et al. Melting Refining Mechanisms in Supersonic Atmospheric Plasma Spraying[J]. Plasma Chemistry Plasma Process, 2013, 32(6):1227-1242.
[13] 胡福胜, 魏正英, 刘伯林, 等. 高效能超音速喷枪内等离子喷涂三维数值分析[J]. 材料科学与工艺, 2013, 21(2): 137-142.
[14] 谭超, 魏正英, 魏培, 等. 内送粉超声速等离子喷涂流场特性分析[J]. 推进技术, 2015, 36(1): 30-36. (TAN Chao, WEI Zheng-ying, WEI Pei, et al. Numerical Analysis of Plasma Flow with Supersonic Plasma Gun[J]. Journal of Propulsion Technology, 2015, 36(1): 30-36.)
[15] 谭超, 魏正英, 魏培, 等. 内送粉超音速等离子喷涂颗粒飞行状态分析[J]. 西安交通大学学报, 2014, 48(6): 91-97. 　　　　　　　　　　　　　*　收稿日期:2014-12-30；修订日期:2015-03-10。基金项目:国防“九七三”资助项目(613112-K3)；西安交通大学金属材料强度国家重点实验室开放研究项目(20131310)。作者简介:谭超,男,硕士生,研究领域为等离子喷涂过程。E-mail: wtanchao@stu.xjtu.edu.cn通讯作者:魏正英,女,教授,博导,研究领域为数字化产品开发与快速制造。E-mail: zywei@ mail.xjtu.edu.cn(编辑:张荣莉)