单液滴破碎空间尺寸分布特性的实验研究

推进技术 ›› 2016, Vol. 37 ›› Issue (6): 1115-1122.

单液滴破碎空间尺寸分布特性的实验研究

朱冬清,刘勇,金仁瀚,李鹏飞

南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016

发布日期:2021-08-15
作者简介:朱冬清，男，硕士生，研究领域为航空发动机燃烧室燃油雾化及燃烧。

Experimental Study for Dimensional Distribution Characteristics of Particles Swarm of Single Droplet Breakage

Nanjing University of Aeronautics and Astronautics，Jiangsu Province key Laboratory of Aerospace Power System，Nanjing 210016，China,Nanjing University of Aeronautics and Astronautics，Jiangsu Province key Laboratory of Aerospace Power System，Nanjing 210016，China,Nanjing University of Aeronautics and Astronautics，Jiangsu Province key Laboratory of Aerospace Power System，Nanjing 210016，China and Nanjing University of Aeronautics and Astronautics，Jiangsu Province key Laboratory of Aerospace Power System，Nanjing 210016，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究液滴破碎后颗粒云空间尺寸分布的机理特性，通过试验方法并建立相应的均匀性指标数学模型，分析了不同We数对液滴破碎后颗粒群空间分布均匀性的影响。结果表明:(1)液滴袋状破碎后颗粒分布类似于袋形的蜂窝结构，并以类似爆破的形式向后方外围扩散分离。(2)多模式破碎后颗粒群为类似于“树”形结构的颗粒分布，前端有分布密集、粒径较小的聚集团，后方分布着大范围的颗粒群。(3)剪切破碎后颗粒群为类似“桶”形的颗粒分布，外围分布着大量颗粒，而内部分布较为复杂。(4)在We数为10～70时，颗粒群的离散率在整体上是呈现先升高后下降再升高的趋势。当We数为30和60时，两个方向上的离散率存在较大差异，而三种不同的破碎模式中，剪切破碎均匀性表现最好。

关键词: 均匀气流；单液滴；颗粒群分布；雾化均匀性

Abstract: In order to research the mechanism characteristics of particles dimensional distribution of single droplet breakage，an experimental method and the mathematical model of uniformity index are employed to analyze the effects of different We parameters on uniformity of particles dimensional distribution. Results indicate that:(1)Particles distribution of droplet baggy breakup is similar to the pouched honeycomb structure，with the similar form of blasting to diffuse and separate to the rear;(2)Particles distribution of droplet multi-mode breakup is similar to a tree structure. The front has an aggregation with compact-smaller particles，and the rear distributes with a wide range of particles group;(3)Particles distribution of droplet sheet-thinning breakup is similar to the bucket structure. The periphery distributes with a large number of particles，but the internal distribution is complex;(4)Within the scope of the We count for 10～70，the discrete rate of particles distribution show that trend is fall after the first rise，and then increases. But there are large difference between the discrete rates of two directions when We count for 30 or 60，and the uniformity of sheet-thinning breakup is among the best in three kinds of broken patterns.

Key words: Uniform airflow；Single droplet；Particle swarm distribution；Atomization uniformity

朱冬清,刘勇,金仁瀚,李鹏飞. 单液滴破碎空间尺寸分布特性的实验研究[J]. 推进技术, 2016, 37(6): 1115-1122.

ZHU Dong-qing,LIU Yong,JIN Ren-han,LI Peng-fei. Experimental Study for Dimensional Distribution Characteristics of Particles Swarm of Single Droplet Breakage[J]. Journal of Propulsion Technology, 2016, 37(6): 1115-1122.

参考文献

[1] 聂万胜, 庄逢辰. 喷雾特性对液体火箭发动机燃烧稳定性的影响[J]. 推进技术, 2000, 21 (3): 56-59. (NIE Wan-sheng, ZHUANG Feng-chen. Effect of Spray Characteristic on the Liquid Rocket Combustion Stability[J]. Journal of Propulsion Technology, 2000, 21(3): 56-59.)
[2] 张志荣, 冉景煜. 低温低速烟气中液滴破碎临界韦伯数与破碎时间分析[J]. 中国电机工程学报, 2012, 32(5): 78-86.
[3] Simmons H C. The Correlation of Drop-Size Distributions in Fuel Nozzle Sprays Part I: The Drop-Size/Volume-Fraction Distribution[J]. Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 1977, 99(3): 309-314.
[4] Simmons H C. The Correlation of Drop-Size Distributions in Fuel Nozzle Sprays Part II: The Drop-Size/Number Distribution [J]. Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 1977, 99(3): 315-319.
[5] Hsiang L P, Faeth G M. Near-Limit Drop Deformation and Secondary Breakup[J]. Multiphas Flow, 1992, 18(5): 635-652.
[6] Hsiang L P, Faeth G M. Drop Properties after Secondary Breakup[J]. International Journal of Multiphase Flow, 1993, 19(5): 721-735.
[7] 杨桂祥, 金如山. 加热空气流中燃油液雾特性[J]. 航空动力学报, 1989, 1(1): 76-78.
[8] 金仁瀚, 张铮, 刘勇, 等. 横向加热气流中直射式喷嘴侧喷雾化特性研究[J]. 推进技术, 2013, 34(5): 658-663. (JIN Ren-han, ZHANG Zheng, LIU Yong. Experimental Study on Atomization Characteristics of Simple Nozzle in Heating Cross Flow[J]. Journal of Propulsion Technology, 2013, 34(5): 658-663.)
[9] 冯守义, 牛志刚, 费立群, 等. 高密度烃燃料雾化特性试验[J]. 推进技术, 2011, 32(4): 512-519. (FENG Shou-yi, NIU Zhi-gang, FEI Li-qun, et al. Experiment on Atomization Characteristics of High Density Hydrocarbon[J]. Journal of Propulsion Technology, 2011, 32(4): 512-519.)
[10] Hui Zhao, Hai-Feng Liu, Xian-Kui Cao, et al. Breakup Characteristics of Liquid Drops in Bag Regime by a Continuous and Uniform Air Jet Flow[J]. International Journal of Multiphase Flow, 2011, 37(5): 530-534.
[11] Gelfand B E. Droplet Breakup Phenomena in Flows with Velocity Lag[J]. Progress in Energy and Combustion Science, 1996, 22(3): 201-265.
[12] Shraiber A A, Podvysotsky A M, Dubrovsky V V. Deformation and Breakup of Drops by Aerodynamic Forces [J]. Atomization and Sprays, 1996, 6(6): 667-692.
[13] Theofanous T G, Li G J, Dinh T N. Aero Breakup in Rarefied Supersonic Gas Flows[J]. Journal of Fluids Engineering-Transactions of the ASME, 2004, 126(4):516-527.
[14] 杨顺华, 乐嘉陵. 超声速气流中液体燃料雾化数值模拟木[J]. 推进技术, 2008, 29(5): 519-522. (YANG Shun-hua , LE Jia-ling. Numerical Simulation of Liquid Fuel Atomization in Supersonic Crossflow[J]. Journal of Propulsion Technology, 2008, 29(5): 519-522.)
[15] Guildenbecher D R, Lopez-Rivera C, Sojka P E. Secondary Atomization[J]. Experiments in Fluids, 2009, 46(3): 371-402. 　　　　　　　　　　　　　*　收稿日期:2015-01-19；修订日期:2015-03-17。作者简介:朱冬清,男,硕士生,研究领域为航空发动机燃烧室燃油雾化及燃烧。E-mail: zhudongqing0201@163.com(编辑:梅瑛)