基于改进蚁群算法的薄壁件柔性工装布局优化

推进技术 ›› 2016, Vol. 37 ›› Issue (6): 1165-1174.

基于改进蚁群算法的薄壁件柔性工装布局优化

周涛¹,熊珍琦²,姚为²,秦英²

西北工业大学自动化学院，陕西西安 710072,北京航星机器制造有限公司，北京 100013,北京航星机器制造有限公司，北京 100013,北京航星机器制造有限公司，北京 100013

发布日期:2021-08-15
作者简介:周涛，男，博士生，研究领域为系统工程技术。
基金资助:
国防基础科研基金(A0420132503)。

Flexible Tooling Layout Optimization for Thin-WalledWorkpieces Based on Improved Ant Colony Algorithm

School of Automation，Northwestern Polytechnical University，Xi’an 710072，China,Beijing Hangxing Technology Development Co.，Ltd.，Beijing 100013，China,Beijing Hangxing Technology Development Co.，Ltd.，Beijing 100013，China and Beijing Hangxing Technology Development Co.，Ltd.，Beijing 100013，China

Published:2021-08-15

摘要/Abstract

摘要： 为解决薄壁件刚性差，在制造过程中易因工装夹紧力产生弹性变形等问题，提出了一种基于改进蚁群算法的薄壁件柔性工装布局优化方法，对薄壁件的柔性工装进行了布局优化。该方法通过有限元分析与蚁群/遗传混合算法相结合的方法进行了工装定位/支承阵列的布局优化。实例验证表明，采用改进遗传蚁群算法对工装布局进行优化，可使柔性工装系统中定位/支承阵列布局的拓扑形态和分布密度处于最优状态，使薄壁件最大变形量缩小47%。

关键词: 薄壁件；工装布局优化；有限元分析；蚁群/遗传算法

Abstract: In order to reduce the elastic deformation of thin-walled workpieces with poor rigidity，when it

Key words: Thin-walled workpiece；Tooling layout optimization；Finite element analysis；Ant colony/

周涛,熊珍琦,姚为,秦英. 基于改进蚁群算法的薄壁件柔性工装布局优化[J]. 推进技术, 2016, 37(6): 1165-1174.

ZHOU Tao¹,XIONG Zhen-qi²,YAO Wei²,QIN Ying². Flexible Tooling Layout Optimization for Thin-WalledWorkpieces Based on Improved Ant Colony Algorithm[J]. Journal of Propulsion Technology, 2016, 37(6): 1165-1174.

参考文献

[1] ZHANG Hui, YANG Ji-ping, WANG Jun-ping. Technologies on High Speed Drilling Deep Holes of Cast-Aluminium Thin-Wall Piece[J]. Journal of Propulsion Technology, 2001, 22(6): 526-528. (张辉, 杨继平, 王君平. 铸铝薄壁件高速钻深孔技术研究[J]. 推进技术, 2001, 22(6): 526-528.)
[2] WANG Zhong-jin, WANG Zhong-ren, WANG Junping, et al. Viscous Pressure Forming of Super-Alloy Super-Thin Wall Corrugated Parts Applied to Rmjet Engine[J]. Journal of Propulsion Technology, 2002, 23(1): 84-88. (王忠金, 王仲仁, 王君平, 等. 冲压发动机超薄壁波纹形件的粘性介质压力成形[J]. 推进技术, 2002, 23(1): 84-88.)
[3] Kaya N. Machining Fixture Locating and Clamping Position Optimization Using Genetic Algorithms [J]. Computers in Industry, 2006, 57: 112-120.
[4] Padmanaban K P, Arulshri K P, Prabhakaran G. Machining Fixture Layout Design Using Ant Colony Algorithm Based Continuous Optimization Method[J]. International Journal of Advanced Manufacturing Technology, 2009, 45: 922-934.
[5] Meshram R C, Patil C R, Shirbhate A D. Optimization of Machining Fixture: Validation of Clamping Force on Side Frame of Ginning Machine[J]. Mechanical Engineering Division, 2011, 92: 48-52.
[6] Rodrigo A, Placid M. Optimal Placement of Fixture Clamps Minimizing the Maximum Clamping Forces[J]. Transactions of the ASME, 2002, 1264: 686-694.
[7] 秦国华, 王子琨, 吴竹溪, 等. 基于神经网络与遗传算法的薄壁件多重装夹布局优化[J]. 机械工程学报, 2015, 51(1): 203-212.
[8] 王运巧, 梅中义, 范玉青. 壁弧形件装夹布局有限元优化[J]. 机械工程学报, 2005, 41(6): 214-217.
[9] 董辉跃, 柯映林. 铣削加工中薄壁件工装布局方案优选的有限元模拟[J]. 浙江大学学报, 2004, 38(1):17-21.
[10] CAI W, HU S J, YUAN J X. Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations[J]. Transactions of the ASME, 1996, 118: 318-324.
[11] 王刚, 钟志水, 黄永青. 基于蚁群遗传算法的网格资源调度研究[J]. 计算机仿真, 2009, 04: 240-243.
[12] 霍军周, 李广强, 滕弘飞, 等. 人机结合蚁群/遗传算法及其在卫星舱布局设计中的应用[J]. 机械工程学报, 2005, 41(3):112-136.
[13] HE Yun-qin, LIANG Guo-zhu. System Parameter Optimization of Solid Propellant Rocket Motors Based on Ant Colony Algorithm[J]. Journal of Propulsion Technology, 2010, 31(1): 5-11. (何允钦, 梁国柱. 基于蚁群算法的固体火箭发动机总体参数优化[J]. 推进技术, 2010, 31(1): 5-11.)
[14] CHEN W F, NI L J, XUE J B. Deformation Control Through Fixture Layout Design and Clamping Force Optimization[J]. International Journal of Advanced Manufacturing Technology, 2008, 38(9-10): 860-867.
[15] Tim J T E, Ganod G C. Specifying Semantic Web Service Compositions Using UML and OCL[C]. Salt Lake City: Proceedings of the 16th International Conference on Web Services, 2007: 521-528.　　　　　　　　　　　　　*　收稿日期:2015-12-24；修订日期:2016-02-28。基金项目:国防基础科研基金(A0420132503)。作者简介:周涛,男,博士生,研究领域为系统工程技术。E-mail: zhouhtkg@163.com(编辑:刘萝威)