环形腔多油垫静压推力轴承膜厚高速重载特性

推进技术 ›› 2016, Vol. 37 ›› Issue (7): 1350-1355.

环形腔多油垫静压推力轴承膜厚高速重载特性

于晓东,孙丹丹,吴晓刚,隋甲龙,刘丹,付旭

哈尔滨理工大学机械动力工程学院，黑龙江哈尔滨 150080,哈尔滨理工大学机械动力工程学院，黑龙江哈尔滨 150080,哈尔滨理工大学机械动力工程学院，黑龙江哈尔滨 150080,哈尔滨理工大学机械动力工程学院，黑龙江哈尔滨 150080,哈尔滨理工大学机械动力工程学院，黑龙江哈尔滨 150080,哈尔滨理工大学机械动力工程学院，黑龙江哈尔滨 150080

发布日期:2021-08-15
作者简介:于晓东，男，博士，教授，硕士生导师，研究领域为润滑理论及摩擦学。
基金资助:
国家自然科学基金(51375123；51075106)；黑龙江省自然科学基金(E2016040)。

High Speed and Heavy Load Characteristic on Oil

Mechanical Power & Engineering College，Harbin University of Science and Technology，Harbin 150080，China,Mechanical Power & Engineering College，Harbin University of Science and Technology，Harbin 150080，China,Mechanical Power & Engineering College，Harbin University of Science and Technology，Harbin 150080，China,Mechanical Power & Engineering College，Harbin University of Science and Technology，Harbin 150080，China,Mechanical Power & Engineering College，Harbin University of Science and Technology，Harbin 150080，China and Mechanical Power & Engineering College，Harbin University of Science and Technology，Harbin 150080，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究高速重载对静压推力轴承油膜厚度的影响，采用理论分析和实验验证相结合的方法，依据润滑理论和摩擦学原理推导出环形腔多油垫静压推力轴承旋转工作台转速、载荷与间隙油膜厚度的关系，设计了油膜厚度测试装置，并进行了实验验证。研究结果表明:随着旋转工作台转速升高和承载增大，惯性流量、剪切和挤压热增大，润滑油粘度下降，致使油膜厚度变薄，局部出现油膜破裂和干摩擦，导致静压支承摩擦失效。

关键词: 静压推力轴承；环形腔多油垫；油膜厚度；高速重载特性；实验研究

Abstract: In order to study the effects of high speed and heavy load on oil film thickness of hydrostatic thrust bearing，the method of combining theoretical analysis and experimental verification was adopted. The relation among oil film thickness，rational speed and load of the worktable in annular multi-pad hydrostatic thrust bearing was deduced by using lubricating theory and tribology principles. A test rig was designed for testing the oil film thickness of the above bearing，and a proven experiment was carried out. The calculated results qualitatively agree well with the experimental data. It has been found that by increasing the rotational speed and load the inertia lubricant flow rate，the heat of shear and extrusion increase，and lubricating oil viscosity declines sharply. The oil film thickness gets thin quickly and boundary lubrication or dry friction appears in local bearing friction pair together with bearing friction pair uneven deformation，and then tribology failure happens.

Key words: Hydrostatic thrust bearing；Annular recess multi-pad；Oil film thickness；High speed and heavy load characteristic；Experimental research

于晓东,孙丹丹,吴晓刚,隋甲龙,刘丹,付旭. 环形腔多油垫静压推力轴承膜厚高速重载特性[J]. 推进技术, 2016, 37(7): 1350-1355.

YU Xiao-dong,SUN Dan-dan,WU Xiao-gang,SUI Jia-long,LIU Dan,FU Xu. High Speed and Heavy Load Characteristic on Oil[J]. Journal of Propulsion Technology, 2016, 37(7): 1350-1355.

参考文献

[1] 张艳芹,陈瑶. 四种油腔形状重型静压轴承承载性能理论分析[J]. 哈尔滨理工大学学报, 2013, 18(2): 68-71.
[2] 刘剑平. 流变模型对剪切稀化流体弹流油膜厚度影响的研究[J]. 中国机械工程, 2011, 21(20): 2415-2418.
[3] Chen G H, Kang Y, Chang Y P. Influences of Recess Geometry and Restrictor Dimension on Flow Patterns and Pressure Distribution of Hydrostatic Bearings[C]. American: American Society of Mechanical Engineers, Proceedings of the ASME Turbo Expo, 2007: 1045-1053.
[4] 叶仪, 殷晨波, 李萍. 静压支承系统油膜特性分析[J]. 南京工业大学学报(自然科学版), 2014, 36(2): 35-39.
[5] 杜巧连, 张克华. 动静压液体轴承油膜承载特性的数值分析[J]. 农业工程学报, 2008, 24(6): 137-140.
[6] 李晓阳, 任淼. 波动载荷下静压支承油膜的数值仿真[J]. 北京工业大学学报, 2012, 38(7): 992-996.
[7] 刘涛, 王益群, 王海芳. 冷轧AGC静-动压轴承油膜厚度的分析与补偿[J]. 机床与液压, 2005, 8(4): 62-65.
[8] 芦定军, 杨建军, 黄德全, 等. 推力滑动轴承瓦块倾角的数值研究[J]. 润滑与密封, 2004, (3): 40-41.
[9] Grabovskii V I. Optimum Clearance of a Gas Hydrostatic Thrust Bearing with Maximum Load Capacity [J]. Fluid Dynamics, 2007, 35(4): 525-533.
[10] Crabtree Aaron B, Manring Noah D, Johnson Robert E. Pressure Measurements for Translating Hydrostatic Thrust Bearings[J]. International Journal of Fluid Power, 2005, 6(3): 19-24.
[11] 蒙文, 易传云. 高速插齿机静压主轴实验设计[J]. 润滑与密封, 2010, 35(2): 87-89.
[12] Han G H, Li J Y, Dong Y H. Control Method of Heavy Hydrostatic Thrust Bearing[C]. Hangzhou: 2009 International Conference on Intelligent Human-Machine Systems and Cybernetics, 2009: 62-65.
[13] Zhang Yanqin, Yu Zeyang, Chen Yao. Simulation and Experimental Study of Lubrication Characteristics of Vertical Hydrostatic Guide Rail [J]. High Technology Letters, 2014, 20(3): 315-320.
[14] Zhang Yan-Qin, Fan Li-Guo. Simulation and Experimental Analysis on Supporting Characteristics of Multiple Oil Pad Hydrostatic Bearing Disk[J]. Journal of Hydrodynamics, 2013, 25(2): 236-241.
[15] Yanqin Zhang, Weiwei Li, Zeyang Yu. Flow Criterion Research on Fluid in Hydrostatic Bearing from Laminar to Turbulent Transition[J]. International Journal of Hybrid Information Technology, 2014, 7(3): 369-374.
[16] Yanqin Zhang, Yao Chen, Zeyang Yu. Influence of Strengthening Rib Location on Temperature Distribution of Heavy Vertical Lathe Worktable[J]. International Journal of u- and e- Service, Science and Technology, 2014, 7(1): 65-71.
[17] Yan Qin Zhang, Wei Wei Li, Li Guo Fan, Simulation and Experimental Analysis of Influence of Inlet Flow on Heavy Hydrostatic Bearing Temperature Field[J]. Asian Journal of Chemistry, 2014, 26(17): 5478-5482.
[18] 韩东江, 杨金福, 陈昌婷, 等. 轴承供气压力对静压气体轴承-转子系统动力学特性影响的实验[J]. 推进技术, 2014, 35(9): 1265-1270. (HAN Dong-jiang, YANG Jin-fu, CHEN Chang-ting, et al. Experimental Research for Effects of Bearing Supply Gas Pressure on Aerostatic Bearing-Rotor System Dynamic Characteristics[J]. Journal of Propulsion Technology, 2014, 35(9): 1265-1270.)
[19] 钟冲, 刘振侠, 胡剑平, 等. 轴承腔壁面油膜厚度超声测量实验研究[J]. 推进技术, 2014, 35(8):1110-1115. (ZHONG Chong, LIU Zhen-xia, HU Jian-ping, et al. Experimental Study of Ultrasonic Measurement of Oil Film Thickness in Bearing Chamber Wall [J]. Journal of Propulsion Technology, 2014, 35(8): 1110-1115.)
[20] 庞志成. 液体气体静压技术[M]. 哈尔滨:黑龙江人民出版社, 1981.
[21] 陈燕生. 液体静压支承原理和设计[M]. 北京:国防工业出版社, 1980.
[22] 丁振坤. 液体静压支承设计[M]. 上海:上海科学技术出版社, 1986.
[23] 陈伯贤. 流体润滑理论及其应用[M]. 北京:机械工业出版社, 1991.
[24] 韩占忠, 王敬, 兰小平. FLUENT流体工程仿真计算实例与应用[M]. 北京:北京理工大学出版社, 2004.
[25] 王福军. 计算流体动力学分析—FLUENT软件原理与应用[M]. 北京:北京清华大学出版社, 2004.
[26] 张艳芹. 重型静压推力轴承综合物理场研究[D]. 哈尔滨:哈尔滨理工大学, 2009.(编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2015-02-27；修订日期:2015-04-15。基金项目:国家自然科学基金(51375123；51075106)；黑龙江省自然科学基金(E2016040)。作者简介:于晓东,男,博士,教授,硕士生导师,研究领域为润滑理论及摩擦学。E-mail: hustyuxiaodong@163.com