气氢气氧同轴剪切喷注器燃烧流场的PLIF测量及仿真研究

推进技术 ›› 2016, Vol. 37 ›› Issue (7): 1380-1386.

气氢气氧同轴剪切喷注器燃烧流场的PLIF测量及仿真研究

李峰,俞南嘉,戴健

北京航空航天大学宇航学院，北京 100191,北京航空航天大学宇航学院，北京 100191,北京航空航天大学宇航学院，北京 100191

发布日期:2021-08-15
作者简介:李峰，男，硕士生，研究领域为航空宇航推进理论与工程。

Simulation and PLIF Experiment Study of Combustion

School of Astronautics，Beihang University，Beijing 100191，China,School of Astronautics，Beihang University，Beijing 100191，China and School of Astronautics，Beihang University，Beijing 100191，China

Published:2021-08-15

摘要/Abstract

摘要： 为探究同轴剪切气气喷注燃烧火焰结构及验证仿真方法的可行性，利用RANS方法对实验工况进行了计算，得到了燃烧室温度和OH分布，以及流场结构。并通过实验，利用平面激光诱导荧光(PLIF)技术测量了透明燃烧室内气氢气氧同轴剪切喷注燃烧火焰的激光诱导OH荧光，得到了火焰结构图像。实验结果表明，在燃烧室前端形成了回流区和结构稳定的剪切燃烧层，在剪切和回流的共同作用下形成了OH尖峰。随OH尖峰下游湍流涡的发展，火焰结构产生褶皱，使燃烧得到了加强。将仿真和实验结果进行对比发现，两者剪切燃烧层位置最大相差0.6mm，OH尖峰轴向位置相差2mm，径向尺寸均为7mm。仿真和实验结果吻合较好，利用该仿真模型对实际情况进行预测是可行的。

关键词: 同轴剪切喷注器；气-气燃烧；平面激光诱导荧光；数值仿真

Abstract: In order to study the flame structure of gas-gas combustion and the practicability of the simulation method，RANS was applied to get the temperature，OH distribution and the characteristics of flow field. In addition，planar laser induced hydroxyl fluorescence (OH-PLIF) technology has been used to image the flame utilizing gas hydrogen/gas oxygen shear coaxial injector in a transparent combustion chamber. The results show that a large recirculation zone and a stable combustion shear layer are established in the front of the chamber. The shear stress，together with the influence of recirculation，shapes a OH peak，and its size and position were measured. With the development of turbulent vortex，folds occur and the combustion are enhanced. The comparison of the results of experiment and simulation shows that there are deviations of 0.6mm in the position of combustion shear layer and 2 mm in the axial position of OH peak. While the radial positions of OH peak are both 7 mm. The simulation results are in good accordance with the measurements although they moderately overpredict the positions of combustion shear layer and OH peak. It is concluded that the computational model can be used to predict the experiment conditions.

Key words: Shear coaxial injector；Gas-gas combustion；PLIF；Numerical simulation

李峰,俞南嘉,戴健. 气氢气氧同轴剪切喷注器燃烧流场的PLIF测量及仿真研究[J]. 推进技术, 2016, 37(7): 1380-1386.

LI Feng,YU Nan-jia,DAI Jian. Simulation and PLIF Experiment Study of Combustion[J]. Journal of Propulsion Technology, 2016, 37(7): 1380-1386.

参考文献

[1] 蔡国飙, 李家文, 田爱梅, 等. 液体火箭发动机设计[M]. 北京:北京航空航天大学出版社, 2011.
[2] Mayer W, Schik A, Schweitzer C, et al. Injection and Mixing Processes in High Pressure LOX/GH2 Rocket Combustors[R]. AIAA 96-2620.
[3] Candel, Herding S, Synder G, et al. Experimental Investigation of Shear Coaxial Cryogenic Jet Flames[J]. Journal of Propulsion & Power, 1998, 14(5): 826-834.
[4] Branam R, Schneider G, Volpp A, et al. Injection Characteristics on the Surface of a Coaxial Jet[R]. AIAA 2002-3695.
[5] 李茂, 高玉闪, 金平, 等. 气气喷嘴推进剂入口温度对燃烧和壁温的影响[J]. 北京航空航天大学学报, 2011, 9.
[6] 杜正刚, 高玉闪, 金平, 等. 速度比对气-气喷嘴燃烧性能的影响[J]. 推进技术, 2009, 30(5).(DU Zheng-gang, GAO Yu-shan, JIN Ping, et al.Effect of Velocity Ratio on Combustion Process Gas-Gas Injector[J]. Journal of Propulsion Technology, 2009, 30(5).)
[7] 杜正刚, 高玉闪, 李茂, 等. 同轴双剪切气-气喷嘴实验研究[J]. 推进技术, 2010, 31(2): 170-173. (DU Zheng-gang, GAO Yu-shan, LI Mao, et al. Experimental Investigation on Dual Shear Coaxial Gas-Gas Injector[J]. Journal of Propulsion Technology, 2010, 31(2): 170-173.)
[8] Marshall W M, Pal S, Woodward R D, et al. Benchmark Wall Heat Flux Data for a GO₂/GH2 Single Element Combustor[R]. AIAA 2005-3572.
[9] Conley A, Vaidyanathan A, Segal C. Heat Flux Measurements for a GO₂/GH2 Single-Element, Shear Injector[J]. Journal of Spacecraft and Rockets, 2007, 44(3): 633-639.
[10] Masquelet M, Menon S. Large Eddy Simulation of Flame-Turbulence Interactions in a GH2-GO₂ Shear Coaxial Injector[R]. AIAA 2008-5030.
[11] Archambault M, Cohn R, Talley D, et al. Computational Analysis of a Single-Element, Shear-Coaxial, GH2/GO₂ Engine[R]. AIAA 2002-1088.
[12] 赵建荣, 陈立红, 俞刚, 等. 显示OH浓度分布图像的平面激光诱导荧光技术[J]. 光学技术, 2000, 26(5): 429-431.
[13] 郭培卿, 臧述升, 葛冰, 等. 合成气扩散燃烧的 OH-PLIF 测量[J]. 航空动力学报, 2011, 26(4): 842-847.
[14] 李麦亮, 周进, 耿辉, 等. 平面激光诱导荧光技术在超声速燃烧中的应用[J]. 推进技术, 2004, 25(4): 381-384. (LI Mai-liang, ZHOU Jin, GENG Hui. Application of PLIF in Research on Supersonic Combustion[J]. Journal of Propulsion Technology, 2004, 25(4): 381-384.)
[15] Rasmussen C C, Dhanuka S K, Driscoll J F. Visualization of Flameholding Mechanisms in a Supersonic Combustor Using PLIF[J]. Proceedings of the Combustion Institute, 2007, 31(2): 2505-2512.
[16] Vaidyanathan A, Gustavsson J, Segal C. Heat Fluxes/OH PLIF Measurements in a GO₂/GH2 Single-Element, Shear Injector[R]. AIAA 2007-5591.
[17] Foust M J, Deshpande M, Pal S, et al. Experimental and Analytical Characterization of a Shear Coaxial Combusting GO₂/GH2 Flowfield[R]. AIAA 96-0646.
[18] 耿辉, 翟振辰, 桑艳, 等. 利用OH-PLIF技术显示超声速燃烧的火焰结构[J]. 国防科技大学学报, 2006, 28(2): 1-6.
[19] 李茂, 杜正刚, 金平, 等. 富氢/富氧燃气同轴气-气喷嘴燃烧性能仿真与分析[J]. 航空动力学报, 2010, 25(4): 835-840.
[20] Theron M, Bellenoue M. Experimental Investigation of the Effects of Heat Release on Mixing Processes and Flow Structure in a High-Speed Subsonic Turbulent H2 Jet[J]. Combustion and Flame, 2006, 145(4): 688-702. (编辑:张荣莉)　　　　　　　　　　　　　*　收稿日期:2015-02-14；修订日期:2015-05-20。作者简介:李峰,男,硕士生,研究领域为航空宇航推进理论与工程。E-mail: ericleefeng@163.com