基于改进粒子群算法的串列叶型优化设计

推进技术 ›› 2016, Vol. 37 ›› Issue (8): 1469-1476.

基于改进粒子群算法的串列叶型优化设计

宋召运,刘波,程昊,茅晓晨

西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072,西北工业大学动力与能源学院，陕西西安 710072

发布日期:2021-08-15
作者简介:宋召运，男，博士生，研究领域为压气机气动热力学。
基金资助:
国家自然科学基金(51236006)；先进航空发动机协同创新中心资助。

Optimization of Tandem Blade Based on Modified

School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China and School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China

Published:2021-08-15

摘要/Abstract

摘要： 为了提高串列叶型优化设计的质量，设计了一套基于改进粒子群算法的串列叶型自动优化系统。研究了原始粒子群算法，提出了一种粒子群算法的改进方法。结果发现，改进粒子群算法的收敛速度和收敛精度明显优于原始粒子群算法和遗传算法。以50°大弯角串列叶型为研究对象，使用程序对串列叶型参数化。以叶型参数和串列叶型相对位置的参数作为优化变量，结合BP神经网络和改进粒子群算法对串列叶型进行优化设计。优化结果表明，优化后的叶型在设计攻角时的总压损失系数降低了22%，静压比升高了0.6%，在负攻角时，优化后的叶型的流动性能得到了明显改善。适当减小串列叶型前后缘的半径可以减小叶型的损失，合理的缝隙结构可以有效减小前排叶型压力面和后排叶型吸力面附面层的分离损失。

关键词: 串列叶型；叶型优化；BP神经网络；粒子群算法

Abstract: To improve the optimization design quality of tandem blade，an automatic optimization system of tandem blade was developed based on Modified Particle Swarm Optimization Algorithm (MPSO). The mechanism of original PSO was deeply researched and a modified method of PSO was presented. The performance of MPSO was compared with genetic Algorithm and original PSO. The comparison indicates MPSO can obtain better convergence speed and precision. An optimization system is developed based on BP neural network and MPSO. The optimization system is validated by optimizing a tandem blade of 50° blade turning. Both parameters of blade and parameters of relative position of tandem blade are treated as optimization variables. Results indicate that the total pressure loss coefficient of optimized blade decreases by 22% and the static pressure ratio increases by 0.6% at design incidence. The flow performance of optimized blade is improved at negative incidence. Decreasing the radius of leading and trailing edge properly can reduce the loss of tandem blade. Rational structure of the slot can effectively reduce separation loss of boundary layer on pressure surface of front blade and suction surface of rear blade.

Key words: Tandem blade；Blade optimization；BP neural network；Particle swarm algorithm

宋召运,刘波,程昊,茅晓晨. 基于改进粒子群算法的串列叶型优化设计[J]. 推进技术, 2016, 37(8): 1469-1476.

SONG Zhao-yun,LIU Bo,CHENG Hao,MAO Xiao-chen. Optimization of Tandem Blade Based on Modified[J]. Journal of Propulsion Technology, 2016, 37(8): 1469-1476.

参考文献

[1] Godard A, Fourmaux A, Burguburu S, et al. Design Method of a Subsonic Aspirated Cascade[R]. ASME 2008-GT-50835.
[2] Liesner K, Meyer R, Lemke M, et al. On the Efficiency of Secondary Flow Suction in a Compressor Cascade [R]. ASME 2010-GT-22336.
[3] 吴国钏. 串列叶栅理论[M]. 北京:国防工业出版社, 1996.
[4] Saha U K, Roy B. Experimental Investigations on Tandem Compressor Cascade Performance at Low Speeds [J]. Experimental Thermal and Fluid Science, 1997, 14(3): 263-276.
[5] Saha U K, Roy B. High Deflection Linar Tandem Compressor Cascade Under Variable Camber Operation[R]. ISABE 97-7101.
[6] Burger G D, Keenan M J. Single-Stage Experimental Evaluation of Highly-Loaded High-Mach-Number Compressor Stages: Part 3 Data and Performance Tandem Rotor[R]. NASA-CR-72773, 1971.
[7] Brent J A, Clemmons D R. Single-Stage Experimental Evaluation of Highly-Loaded High-Mach-Number Compressor Stages: Part 8 Final Report[R]. NASA-CR-134713, 1974.
[8] Wu G, Zhang B, Guo B. Experimental Investigation of Tandem Blade Cascade with Double Circular Arc-Profile[R]. ASME 85-IGT-94.
[9] 苗厚武, 高金满, 郭捷. 串列叶片的应用研究[J]. 航空动力学报, 1991, 6(3): 203-207.
[10] Sanger N L. Analytical Study of the Effects of Geometric Changes on the Flow Characteristics of Tandem-Bladed Compressor Stators[R]. NASA TN-D-6264, 1971.
[11] Bammert K, Staude R. Optimization for Rotor Blades of Tandem Design for Axial Flow Compressors[R]. ASME 79-GT-125.
[12] 沈淳, 滕金芳. 轴向相对位置对串列叶栅气动性能影响的数值研究[J]. 科学技术与工程, 2013, 13(5):1238-1241.
[13] 赵斌, 刘宝杰. 跨声串列转子及前后排叶片匹配特性分析[J]. 航空学报, 2011, 32(6): 978-987.
[14] 赵斌, 刘宝杰. 前、后排叶片相对位置对串列转子性能的影响[J]. 推进技术, 2012, 33(1): 26-36. (ZHAO Bin, LIU Bao-jie. Effects of Relative Geometry Position of Forward and Aft Blades on Performance of Tandem Rotor[J]. Journal of Propulsion Technology, 2012, 33(1): 26-36.)
[15] 薛亮, 韩万金. 基于遗传算法与近似模型的全局气动优化方法[J]. 推进技术, 2008, 29(3): 360-366. (XUE Liang, HAN Wan-jin. Global Aerodynamic Optimization Method Using Genetic Algorithms and Surrogate Model[J]. Journal of Propulsion Technology, 2008, 29(3):360-366.)
[16] Kennedy J, Eberhart R C. Swarm Intelligence[M]. US: Morgan Kaufmann Publishers, 2001.
[17] Hu X H, Shi Y H, Eberhart R. Recent Advances in Particle Swarm[C]. Portland: Proceedings of IEEE Congress on Evolutionary Computation, 2004.
[18] Xie X F, Zhang W J , Yang Z L . A Dissipative Particle Swarm Optimization[J]. Proceedings of IEEE Congress on Evolutionary Computation, 2002, 8(2): 1456-1461.
[19] Clercy M, Kennedy J. The Particle Swarm-Explosion, Stability, and Convergence in a Multidimensional Complex Space[J]. IEEE Transactions on Evolutionary Computation, 2002 , 6(1): 58-73.
[20] Kennedy J , Eberhart R C . Particle Swarm Optimization[C]. USA: Proceedings of IEEE International Conference on Neural Networks, 1995.(编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2015-04-06；修订日期:2015-05-15。基金项目:国家自然科学基金(51236006)；先进航空发动机协同创新中心资助。作者简介:宋召运,男,博士生,研究领域为压气机气动热力学。E-mail: szylast@126.com