导流块深度对抛物形凹面腔中激波反射聚焦的影响

推进技术 ›› 2016, Vol. 37 ›› Issue (9): 1786-1793.

导流块深度对抛物形凹面腔中激波反射聚焦的影响

谭胜¹,陈鑫^1,2,何立明¹,荣康³,张强⁴,朱晓彬¹,张一豪¹

空军工程大学航空航天工程学院，陕西西安 710038,空军工程大学航空航天工程学院，陕西西安 710038; 先进航空发动机协同创新中心，北京 100191,空军工程大学航空航天工程学院，陕西西安 710038,中国人民解放军94710部队，江苏无锡 214142,中国人民解放军95835部队，新疆乌鲁木齐 830091,空军工程大学航空航天工程学院，陕西西安 710038,空军工程大学航空航天工程学院，陕西西安 710038

发布日期:2021-08-15
作者简介:谭胜，男，硕士生，研究领域为气动热力推进与新概念脉冲爆震发动机。
基金资助:
国家自然科学基金青年科学基金(51106178)。

Effects of Deflector Depth on Shock Wave Focusing

Aeronautics and Astronautics Engineering Institute Air Force Engineering University，Xi’an 710038，China,Aeronautics and Astronautics Engineering Institute Air Force Engineering University，Xi’an 710038，China; The Collaborative Innovation Center for Advanced Aero-Engine，Beijing 100191，China,Aeronautics and Astronautics Engineering Institute Air Force Engineering University，Xi’an 710038，China,Chinese People’s Liberation Army with Number of 94710，Wuxi 214142，China,Chinese People’s Liberation Army with Number of 95835，Urumqi 830091，China,Aeronautics and Astronautics Engineering Institute Air Force Engineering University，Xi’an 710038，China and Aeronautics and Astronautics Engineering Institute Air Force Engineering University，Xi’an 710038，China

Published:2021-08-15

摘要/Abstract

摘要： 为研究导流块深度对抛物形凹面腔内径向入射激波聚焦过程的影响，对马赫数为1.41的径向入射激波在导流块深度分别为0，5，10，15mm的凹面腔内反射聚焦过程进行了实验研究。结合高速CCD拍摄到的凹面腔中气流流场纹影照片和动态压力传感器测得的聚焦过程中流场的压力变化，对径向入射激波在凹面腔内的反射聚焦过程进行了描述。通过比较不同导流块深度下激波反射聚焦过程，发现随着导流块深度的加深，前导激波聚焦和反射激波聚焦的时间差会减小，使激波聚焦的强度增大，当导流块深度从0mm增加到15mm时，激波聚焦所致的峰值压力从0.39MPa增加到0.51MPa。但是，随着导流块深度的加深，压力增益下降，并使排气过程的难度加大，因此导流块深度为10mm左右时能取得较好的聚焦效果。

关键词: 激波聚焦；径向入射；抛物形凹面腔；导流块深度

Abstract: In order to obtain the effects of the deflector depth on the process of shock wave focusing in a parabolic cavity，experiments were carried out to investigate the radial incident shock focusing with Mach number 1.41 in cavity where the depths of deflectors were 0，5，10，15mm，respectively. Based on schlieren images of flow field in cavity captured by high-speed CCD camera and pressure histories recorded by dynamic pressure sensors，the behaviour of radial incident shock wave reflect and focus in a parabolic cavity was described. The shock wave focusing processes of different deflectors were compared. With the increase of the depth of deflectors，the time interval between leading shock focusing and reflect shock focusing decreases，which makes the strength of shock wave focusing increase. When the depth of deflectors increases from 0mm to 15mm，the peak pressure caused by the shock wave focusing increases from 0.39MPa to 0.51MPa. However，with the increase of depth，the pressure gain reduces and exhaust process becomes much more difficult. Therefore，the depth of deflectors being about 10mm can achieve better focusing effects.

Key words: Shock wave focusing；Radial incident；Parabolic cavity；Depth of deflector

谭胜,陈鑫,何立明,荣康,张强,朱晓彬,张一豪. 导流块深度对抛物形凹面腔中激波反射聚焦的影响[J]. 推进技术, 2016, 37(9): 1786-1793.

TAN Sheng¹,CHEN Xin^1,2,HE Li-ming¹,RONG Kang³,ZHANG Qiang⁴,ZHU Xiao-bin¹,ZHANG Yi-hao¹. Effects of Deflector Depth on Shock Wave Focusing[J]. Journal of Propulsion Technology, 2016, 37(9): 1786-1793.

参考文献

[1] Roy G, Frolov S, Borisov A, et al. Pulse Detonation Propulsion: Challenges, Current Status, and Future Perspective[J]. Progress in Energy and Combustion Science, 2004, 30(6): 545-672.
[2] 严传俊, 刘军, 范玮, 等. 脉冲爆震发动机工作原理与循环分析[J]. 推进技术, 1996, 17(3):56-63. (YAN Chuan-jun, LIU Jun, FAN Wei, et al. Operating Principle and Cycle Analysis of Pulse Detonation Engine[J]. Journal of Propulsion Technology, 1996, 17(3): 56-63.)
[3] 严传俊, 范玮, 郑龙席, 等. 脉冲爆震发动机原理及关键技术[M]. 西安:西北工业大学出版社, 2005.
[4] Smirnov N N, Nikitin V F, Boichenko A P, et al. Deflagration to Detonation Transition in Gases and Its Application to Pulsed Detonation Devices[C]. Moscow: Gaseous and Heterogeneous Detonations, 1999.
[5] Li C, Kailasanath K. Detonation Initiation in Pulse Detonation Engines[R]. AIAA 2003-1170.
[6] Kailasanath K. Recent Developments in the Research on Pulse Detonation Engine[J]. AIAA Journal, 2003, 38: 1698-1708.
[7] Schauer F, Stutrud J. Detonation Initiation Studies and Performance Results for Pulsed Detonation Engine Applications [R]. AIAA 2001-1129.
[8] 韩启祥, 王家骅, 王波. 预混气爆震管中爆燃到爆震转捩距离的研究[J]. 推进技术, 2003, 24(1): 63-66. (HAN Qi-xiang, WANG Jia-hua, WANG Bo. Investigation of Deflagration to Detonation Transition Distance in a Tube with Mixture [J]. Journal of Propulsion Technology, 2003, 24(1): 63-66.)
[9] Levin V A , Nechaev J N, Tarasov A I. A New Approach to Organizing Operation Cycles in Pulse Detona-tion Engines[C]. Moscow: High-Speed Deflagration and Detonation: Fundamentals and Control, 2001: 223-238.
[10] Achasov O V, Panyazkov O G. Some Gasdynamic Methods for Control of Detonation Initiation and Propagation [C]. Moscow: High-Speed Deflagration and Detonation: Fundamentals and Control, 2001: 31-44.
[11] Leyva I A, Tangirala V, Dean A J. Investigation of Unsteady Flow Field in a 2-Stage PDE Resonator[R]. AIAA 2003-715.
[12] 李海鹏, 何立明, 陈鑫, 等. 不同结构形式凹面腔内的激波会聚起爆爆震波数值研究[J]. 兵工学报, 2009, 30(增刊):47-51.
[13] 张强, 何立明, 李海鹏, 等. 尾喷管对2-Stage PDE性能影响的数值模拟[J]. 空军工程大学学报(自然科学版), 2011, 12(1): 10-14.
[14] 曾昊, 何立明, 苏建勇. 凹面腔尺寸和曲率对激波会聚起爆的影响分析[J]. 空气动力学学报, 2013, 31(1): 82-87.
[15] 荣康, 何立明, 张建邦, 等. 喷口导流环结构对激波聚焦起爆的影响分析[J]. 推进技术, 2012, 33(2): 299-305. (RONG Kang, HE Li-ming, ZHANG Jian-bang, et al. Investigaton on the Effects of Delector Structure on Detonaton Initiation by Shock Wave Focusing[J]. Journal of Propulsion Technology, 2012, 33(2): 299-305.)
[16] 何立明, 荣康, 曾昊, 等. 射流宽度对激波会聚起爆的影响分析[J]. 空气动力学学报, 2012, 30(3): 322-327.
[17] Law C, Muritala A O, Skews B W. Unsteady Flow with Separation Behind a Shock Wave Diffracting over Curved Walls[J]. Shock Waves, 2014, 24: 283-294.
[18] Skews B W, Kleine H. Flow Features Resulting from Shock Wave Impact on a Cylindrical Cavity[J]. Journal of Fluid Mechanics, 2007, 580: 481-493.　　　　　　　　　　　　　*　收稿日期:2016-01-06；修订日期:2016-04-05。基金项目:国家自然科学基金青年科学基金(51106178)。作者简介:谭胜,男,硕士生,研究领域为气动热力推进与新概念脉冲爆震发动机。E-mail: tsh201201401007@163.com(编辑:朱立影)