双模态超燃冲压发动机最大供油模态计算方法研究

推进技术 ›› 2017, Vol. 38 ›› Issue (1): 34-39.

双模态超燃冲压发动机最大供油模态计算方法研究

黄　兴¹,蔡建兵¹,陈玉春²

中国航空动力机械研究所，湖南株洲 412002，,中国航空动力机械研究所，湖南株洲 412002，,西北工业大学动力与能源学院，陕西西安 710072

发布日期:2021-08-15

Research on Computation Method of Maximum Fuel Supplied Mode for Dual-Mode Scramjet

AVIC Aviation Powerplant Research Institute，Zhuzhou 412002，China,AVIC Aviation Powerplant Research Institute，Zhuzhou 412002，China and School of Power and Energy，Northwestern Polytechnical University，Xi’an 710072，China

Published:2021-08-15

摘要/Abstract

摘要： 为了获得不同飞行状态下双模态超燃冲压发动机最大供油状态，在集总参数方程的双模态超燃冲压发动机性能计算模型基础上，通过分析双模态超燃冲压发动机堵塞边界条件及工作机理，发展了最大供油模态流量平衡的求解方法，并以此为基础建立了双模态超燃冲压发动机最大供油模态计算模型。给出某飞行条件下的最大供油模态迭代计算过程，并详细描述了其所表征的物理现象，其流量平衡计算精度达10-4，并在此基础上完成了不同飞行马赫数下的最大供油模态计算，获得相应的燃烧室最大供油量及隔离段/燃烧室沿程参数分布。结果表明，该计算方法可实现双模态超燃冲压发动机最大供油模态的流量平衡计算，并能精确地捕捉给定燃油分配形式下的燃烧室最大供油量。

关键词: 双模态超燃冲压发动机；最大供油模态；集总参数方程；计算方法

Abstract: In order to obtain the character of dual-mode scramjet at maximum fuel supplied mode in different flight state，based on the performance calculation model of dual-mode scramjet including lumped parameter equation，through analyzing the chocking boundary condition and principle of scramjet，the method to solve the computation of maximum fuel supplied mode of scramjet was developed. Correspondingly，the computation model was established. The iterative computation process of maximum fuel supplied mode of scramjet in a flight condition and a detailed description of the physical phenomenon are given，its computing accuracy reaches 10-4. Then the computation of maximum fuel supplied mode of scramjet in different flight Mach number is completed，achieving the maximum fuel of combustion and the flow path parameters of isolator/combustion correspondingly. The maximum fuel supplied mode of scramjet was calculated and analyzed in the paper，the results show that the method can be used to calculate the flow balance of dual-mode scramjet exactly，and accurately capture the maximum fuel flow in different flight state when the distraction ratio of fuel is given.

Key words: Dual-mode Scramjet；Maximum fuel supplied mode；Lumped parameter equation；Computation method

黄兴,蔡建兵,陈玉春. 双模态超燃冲压发动机最大供油模态计算方法研究[J]. 推进技术, 2017, 38(1): 34-39.

HUANG Xing¹,CAI Jian-bing¹,CHEN Yu-chun². Research on Computation Method of Maximum Fuel Supplied Mode for Dual-Mode Scramjet[J]. Journal of Propulsion Technology, 2017, 38(1): 34-39.

参考文献

[1] 陈玉春, 刘小勇, 黄兴. 基于集总参数方程的超燃冲压发动机性能计算模型[J]. 推进技术, 2012, 33(6): 840-846. (CHEN Yu-chun, LIU Xiao-yong, HUANG Xing. A Model Based on Lumped Parameter Method for Performance Computation of Scramjet[J]. Journal of Propulsion Technology, 2012, 33(6): 840-846.)
[2] 黄兴, 陈玉春, 李洁, 等. 双模态超燃冲压发动机流量匹配的临界面积法[J]. 航空动力学报, 2013, 28(6): 1305-1312
[3] 黄兴, 陈玉春, 王晓东, 等. 超燃冲压发动机流量匹配工作机理研究[J]. 航空动力学报, 2014, 29(4): 852-857.
[4] 黄兴. 超燃冲压发动机特性计算与一体化设计技术研究[D]. 西安:西北工业大学, 2014.
[5] Kathleen Tran. One Dimensional Analysis Program for Scramjet and Ramjet Flowpaths[D]. Virginia: Virginia Polytechnic Inatitute and State University, 2010.
[6] Michael K. Smart, Ray Stalker. High Speed Propulsion: Engine Design-Integration and Thermal Management[R]. North Atlantic Treaty Organisation Report, 2010.
[7] Corin Segal. The Scramjet Engine Processes and Characteristics[M]. London: Cambridge University, 2009.
[8] Olds J R, Bradford J E. SCCREAM (Simulated Combined-Cycle Rocket Engine Analysis Module)-A Conceptual RBCC Engine Design Tool[R]. AIAA 97-2760.
[9] Bradford J E, Olds J R. Improvements and Enhancements to SCCREAM, a Conceptual RBCC Engine Analysis Tool[R]. AIAA 98-3775.
[10] Bradford J E. A Technique for Rapid Prediction of Aft-body Nozzle Performance for Hypersonic Launch Vehicle Design[D]. Georgia: Dissertation of Georgia Institute of Technology, 2001.
[11] Heiser W H, Pratt D T. Hypersonic Airbreathing Propulsion[M]. Washington D C: AIAA Education Series, 1994.
[12] Billig F S,Sullins G A. Optimization of Combustor-Isolator in Dual-Mode Scramjets[R]. AIAA 93-515.
[13] Billig F S. Research on Supersonic Combustion[J]. Journal of Propulsion and Power, 1993, 9(4): 499-513.
[14] Shapiro A H. The Dynamics and Thermodynamics of Compressible Fluid Flow[M]. New York: Ronald Press, 1953.
[15] Cheristopher Ryan Corbin. Design and Analysis of a Mach 3 Dual Mode Scramjet Combustor[R]. AIAA 2008-02644.
[16] Nestler D E, Daywitt J E. Boundary Layer Separation Correlations for Hypersonic Inlet Analyses[R]. General Electric Report AMJ-86-01, 1986.
[17] Rodger Joseph Biasca. Chemical Kinetics of Scramjet Propulsion[D]. Massachusetts:　Massachusetts Institute of Technology, 1988.
[18] Chiang-Hwa Ren. A Computer Based Model for the Performance Analysis of a Scramjet Propulsion System[D]. Massachusetts: Massachusetts Institute of Technology, 1989.
[19] Kyle Charles Markell. Exergy Methods for the Generic Analysis and Optimization of Hypersonic Vehicle Concepts[D]. Virginia: Virginia Polytechnic Institute and State University, 2005.　　　　　　　　　　　　　*　收稿日期:2015-06-04；修订日期:2015-11-24。作者简介:黄兴,男,博士,工程师,研究领域为航空宇航推进理论与工程,E-mail: huangxing831020@126.com(编辑:史亚红)