轴向间距对低反力度压气机性能影响的二维非定常数值研究

推进技术 ›› 2017, Vol. 38 ›› Issue (10): 2218-2223.

轴向间距对低反力度压气机性能影响的二维非定常数值研究

王仲奇,王松涛,张龙新

哈尔滨工业大学发动机气体动力研究中心，黑龙江哈尔滨 150001,哈尔滨工业大学发动机气体动力研究中心，黑龙江哈尔滨 150001,哈尔滨工业大学发动机气体动力研究中心，黑龙江哈尔滨 150001

发布日期:2021-08-15
作者简介:王仲奇，男，中国工程院院士，教授，研究领域为叶轮机械气动热力学。
基金资助:
国家自然科学基金项目(51436002；51206035)；国家自然科学基金创新研究群体项目(51121004)。

Performance Evaluation of a Low-Reaction Compressor with Different Axial Spacing by 2D Unsteady Simulation

Engine Aerodynamics Research Centre，Harbin Institute of Technology，Harbin 150001，China,Engine Aerodynamics Research Centre，Harbin Institute of Technology，Harbin 150001，China and Engine Aerodynamics Research Centre，Harbin Institute of Technology，Harbin 150001，China

Published:2021-08-15

摘要/Abstract

摘要： 为进一步明晰低反力度压气机内部复杂流动机理，以低速低反力度吸附式压气机叶展中截面微元段作为研究对象，借助非定常数值模拟的方法，探讨了变轴向间距对低反力度压气机气动性能的影响。研究结果显示，轴向间距缩短后，转子受下游静子势流的作用更为明显，近尾缘区域静压波动幅度增加、尾迹亏损加剧；在静子流道输运过程中，转子尾迹呈现出明显的离散趋势且与静子吸力面附面层干涉作用加剧，这导致静子通流损失增加12.976%，整机效率降低了0.16%。

关键词: 低反力度压气机；轴向间距；非定常数值模拟

Abstract: To further clarify the complex flow mechanism within a low-reaction compressor， unsteady simulations were conducted on the mid-span micro element of a low speed low-reaction aspirated compressor. Effects of the axial gap between rotor and stator on the aerodynamic performance of the aspirated compressor were studied in detail by 2D unsteady simulation. The results show that， as the axial gap is reduced， on the one hand， the influence of the downstream stator potential effect on the rotor is more pronounced， which results in an intensified pressure fluctuation adjacent to the rotor trailing edge and an aggravated wake decay; on the second hand， as transported through the stator passage， the rotor wake presents a stronger tendency to be discrete and its interactions with the stator suction side boundary layer is aggravated， which leads to an increase of stator throughflow loss by 12.976% and a decrease of the whole stage efficiency by 0.16%.

Key words: Low-reaction compressor；Axial spacing；Unsteady simulation

王仲奇,王松涛,张龙新. 轴向间距对低反力度压气机性能影响的二维非定常数值研究[J]. 推进技术, 2017, 38(10): 2218-2223.

WANG Zhong-qi,WANG Song-tao,ZHANG Long-xin. Performance Evaluation of a Low-Reaction Compressor with Different Axial Spacing by 2D Unsteady Simulation[J]. Journal of Propulsion Technology, 2017, 38(10): 2218-2223.

参考文献

[1] 陈绍文, 兰云鹤, 王春雪, 等. 基于转捩模型的吸附式压气机正弯叶片数值研究[J]. 推进技术, 2014, 35(9): 1188-1193. (CHEN Shao-wen, LAN Yun-he, WANG Chun-xue, et al. Numerical Study of Positively Curved Blade in Aspirated Compressor Cascade Based on Transition Model[J]. Journal of Propulsion Technology, 2014, 35(9): 1188-1193.)
[2] 张龙新, 杜鑫, 刘勋, 等. 基于主/被动联合控制技术设计的高负荷扩压叶栅内部流场结构研究[J]. 推进技术, 2015, 36(11): 1662-1668. (ZHANG Long-xin, DU Xin, LIU Xun, et al. Study on the Flow Structure of a Highly-Loaded Compressor Cascade Designed with Active and Passive Flow Control Methods [J]. Journal of Propulsion Technology, 2015, 36(11):1662-1668.)
[3] 张龙新, 陈绍文, 郭昊雁, 等. 端壁采用孔式抽吸对扩压叶栅气动性能的影响[J]. 推进技术, 2013, 34(9): 1204-1208. (ZHANG Long-xin, CHEN Shao-wen, GUO Hao-yan, et al. Effects of End-Wall Taking Hole-Suction on Aerodynamic Performance of a Compressor Cascade[J]. Journal of Propulsion Technology, 2013, 34(9): 1204-1208.)
[4] Gümmer V, Goller M, Swoboda M. Numerical Investigation of End Wall Boundary Layer Removal on Highly Loaded Axial Compressor Blade Rows[J]. Journal of Turbomachinery, 2008, 130.
[5] Kerrebrock J L, Reijnen D P, Ziminsky WS, et al. Aspirated compressors[R]. ASME 97-GT-525.
[6] Kerrebrock J L, Drela M A, Merchant A, et al. A Family of Designs for Aspirated Compressors[R]. ASME 98-GT-196.
[7] Merchant A A, Drela M, Kerrebrock J L, et al. Aerodynamic Design and Analysis of a High Pressure Ratio Aspirated Compressor Stage[R]. ASME 2000-GT-619.
[8] Merchant A A. Design and Analysis of Axial Aspirated Compressor Stages[D]. Massachusetts: Massachusetts Institute of Technology, 1999.
[9] Zhang M, He L. Combining Shaping and Flow Control for Aerodynamic Optimization[J]. AIAA Journal, 2015, 53(4): 888-901.
[10] 刘波, 李俊, 杨小东, 等. 吸附式压气机叶型及抽吸方案耦合优化设计[J]. 推进技术, 2014, 35(9): 1194-1201. (LIU Bo, LI Jun, YANG Xiao-dong, et al. Coupling Optimization Design for Aspirated Compressor Airfoil and Aspirated Scheme[J]. Journal of Propulsion Technology, 2014, 35(9): 1194-1201.)
[11] Guidotti E, Turner M G. Analysis of the Unsteady Flow in an Aspirated Counter-Rotating Compressor Using the Nonlinear Harmonic Method[R]. ASME GT 2009-60285.
[12] Knapke R D, Turner M G. Unsteady Simulations of a Counter-Rotating Aspirated Compressor[R]. ASME GT 2013-95209.
[13] Knapke R D, Turner M G. Detailed Unsteady Simulation of a Counterrotating Aspirated Compressor with a Focus on the Aspiration Slot and Plenum[J]. International Journal of Rotating Machinery, 2013, (1): 1-17.
[14] 都昆, 王松涛. 转静干涉对跨声速吸附式压气机流场的影响分析[J]. 推进技术, 2015, 36(5): 713-721. (DU Kun, WANG Song-tao. Effects of Rotor-Stator Interaction on Flow Field of a Transonic Boundary Layer Suction Compressor[J]. Journal of Propulsion Technology, 2015, 36(5): 713-721.)
[15] 王松涛, 羌晓青, 冯国泰, 等. 低反动度附面层抽吸式压气机及其内部流动控制[J]. 工程热物理学报, 2009, 30(1): 35-40.
[16] 李绍斌, 陈浮, 颜培刚, 等. 静叶时序对压气机叶片附面层流动影响的数值研究[J]. 航空学报, 2007, (S1): 62-69.
[17] Valkov T V, Tan C S. Effect of Upstream Rotor Vortical Disturbances on the Time-Averaged Performance of Axial Compressor Stators,Part 1: Framework of Technical Approach and Wake-Stator Blade Interactions[J]. Journal of Turbomachinery, 1999, 121(3): 378-386.
[18] Smith L H. Wake Dispersion in Turbomachines[J]. Journal of Fluids Engineering, 1966, 88(3): 688-690.
[19] Adamczyk J J, Strazisar A J, Okiishi T H. Wake Recovery Performance Benefit in a High-Speed Axial Compressor[J]. Journal of Turbomachinery, 2002, 124(2):275-284.　　　　　　　　　　　　　*　收稿日期:2017-05-27；修订日期:2017-06-14。基金项目:国家自然科学基金项目(51436002；51206035)；国家自然科学基金创新研究群体项目(51121004)。作者简介:王仲奇,男,中国工程院院士,教授,研究领域为叶轮机械气动热力学。E-mail: wangzhongqi@hit.edu.cn(编辑:朱立影)