小流量温度畸变发生器工作特性试验研究

推进技术 ›› 2017, Vol. 38 ›› Issue (12): 2836-2842.

小流量温度畸变发生器工作特性试验研究

罗玛¹,李建中²,向立军¹,刘博强²,成本林¹

中航工业航空动力机械研究所，湖南株洲 412002,南京航空航天大学航空发动机热环境与热结构工业和信息化部重点实验室，江苏南京 210016,中航工业航空动力机械研究所，湖南株洲 412002,南京航空航天大学航空发动机热环境与热结构工业和信息化部重点实验室，江苏南京 210016,中航工业航空动力机械研究所，湖南株洲 412002

发布日期:2021-08-15
作者简介:罗玛，男，硕士，高级工程师，研究领域为航空发动机热能动力工程。E-mail: rome158@163.com 通讯作者:李建中，男，博士，副教授，研究领域为航空发动机气动热力学。
基金资助:
国家自然科学基金(51476077)。

Experimental Investigation on Operating Characteristic of Small Flow Rate Temperature Distortion Generator

AVIC Aviation Powerplant Research Institute，Zhuzhou 412002，China,Nanjing University of Aeronautics and Astronautics，Key Laboratory of Aero-engine Thermal Environment and Structure，Ministry of Industry and Information Technology，Nanjing 210016，China,AVIC Aviation Powerplant Research Institute，Zhuzhou 412002，China,Nanjing University of Aeronautics and Astronautics，Key Laboratory of Aero-engine Thermal Environment and Structure，Ministry of Industry and Information Technology，Nanjing 210016，China and AVIC Aviation Powerplant Research Institute，Zhuzhou 412002，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究涡轴发动机温度畸变发生器工作特性，以氢气为燃料、空气为氧化剂，依据V型槽稳焰和传焰原理，设计了小流量温度畸变发生器，建立了小流量温度畸变发生器试验平台，针对两种不同结构温度畸变发生器进行了大量试验，获得了温度畸变发生器的总压恢复系数、总压不均匀度、面平均温升和温度分布不均匀度等工作特性，绘制了温度畸变发生器出口温度畸变图谱。结果表明:温度畸变发生器主要性能参数和出口温度图谱能够满足涡轴发动机进口温度畸变的工作要求。

关键词: 涡轴发动机；温度畸变发生器；温度畸变指数

Abstract: To investigate the operating characteristics of temperature distortion generator for a turboshaft engine， a small flow rate temperature distortion generator with hydrogen/air was designed and produced in accordance with the mechanism of flame holder and propagation by V type groove and the test rig of the temperature distortion generator was installed. ?Many tests were carried out for the two different temperature distortion generators and the operating characteristics of temperature distortion generator were achieved， such as， total pressure recovery coefficients， total pressure unwell-distributed coefficients， temperature rise of surface average， temperature unwell-distributed coefficients. The outlet temperature distortion atlas of temperature distortion generator was drawn. The results indicated that the performance and outlet temperature distortion atlas of temperature distortion generator could meet with the demands of the inlet temperature distortion for a turboshaft engine.

Key words: Turboshaft engine；Temperature distortion generator；Temperature distortion index

罗玛,李建中,向立军,刘博强,成本林. 小流量温度畸变发生器工作特性试验研究[J]. 推进技术, 2017, 38(12): 2836-2842.

LUO Ma¹,LI Jian-zhong²,XIANG Li-jun¹,LIU Bo-qiang²,CHENG Ben-lin¹. Experimental Investigation on Operating Characteristic of Small Flow Rate Temperature Distortion Generator[J]. Journal of Propulsion Technology, 2017, 38(12): 2836-2842.

参考文献

[1] 叶巍, 唐世建, 白磊. 进气温度畸变对某发动机稳定性影响的研究[J]. 燃气涡轮试验与研究, 2006, 19(4).
[2] 王润明, 王惠儒, 侯敏杰, 等. 温度畸变发生器研制[J]. 燃气涡轮试验与研究, 2002, 15(2).
[3] 展之宏, 宁烽, 宁交贤. 发动机进口流场温度畸变测试技术研究[J]. 数据采集与处理, 2000, (2).
[4] 罗卫东, 李锋, 高贤智, 等. 高温升旋流燃烧室性能的数值分析[J]. 推进技术, 2015, 36(11): 1686-1693. (LUO Wei-dong, LI Feng, GAO Xian-zhi, et al. Numerical Analysis for Performance of High Temperature Rise Swirl Combustors[J]. Journal of Propulsion Technology, 2015, 36(11): 1686-1693.)
[5] 邢菲, 孟祥泰, 樊未军, 等. 气冷气动雾化喷油杆冷却性能实验[J]. 推进技术, 2007, 28(6): 612-615. (XING Fei, MENG Xiang-tai, FAN Wei-jun, et al. Experiments on Cooling Effect of the Air Atomizing Fuel Injector Bars[J]. Journal of Propulsion Technology, 2007, 28(6): 612-615.)
[6] David N, Robert E. A Survey of Inlet-Engine Distortion Compatibility [R]. AIAA 83-1166.
[7] Gary A, Richard L. Temperature Distortion Generator for Turboshaft Engine Testing[R]. NASA-TM-83748.
[8] Richard A, Robert J. The Effect of Inlet Temperature Distortion on the Performance of a Turbo-Fan Engine Compressor System[R]. AIAA 70-625.
[9] Thomas J Biesiadny, Gary A Klann, Jeffery K Little. Response of a Small- Turboshaft-Engine Compression System to Inlet Temperature Distortion[R]. NASA-TM-83765.
[10] Richard A Rudey, Robert J Antl. The Effect of Inlet Temperature Distortion on the Performance of a Turbo-Fan Engine Compressor System[R]. NASA-TM-52788.
[11] 刘大响, 叶培粱, 胡骏, 等. 航空燃气涡轮发动机稳定性设计与评定技术[M]. 北京:航空工业出版社, 2004: 51-72.
[12] 叶巍, 唐世建, 白磊. 进气温度畸变对某发动机稳定性影响的研究[J]. 燃气涡轮试验与研究, 2006, 19(4): 6-15.
[13] 常淑清. 温度畸变的形成及对推进系统的影响[J]. 燃气涡轮试验与研究, 1996, 9(2): 55-59.
[14] 杨权, 叶巍, 陆德雨, 等. 航空发动机稳定性评定试验装置的选择[J]. 燃气涡轮试验与研究, 2001, 14(4): 16-21.
[15] 代冰, 叶巍. 美、俄航空发动机稳定性标准对比分析[J]. 航空标准化与质量, 2009, (2): 44-48.
[16] 梁德旺, 张世英. 畸变图谱的绘制[J]. 南京航空学院学报, 1987, (4).(编辑:史亚红)　　　　　　　　　　　　　*　收稿日期:2016-06-19；修订日期:2016-07-22。基金项目:国家自然科学基金(51476077)。作者简介:罗玛,男,硕士,高级工程师,研究领域为航空发动机热能动力工程。E-mail: rome158@163.com通讯作者:李建中,男,博士,副教授,研究领域为航空发动机气动热力学。E-mail: ljzh0629@nuaa.edu.cn