温度对矢量喷管电液伺服系统影响研究

推进技术 ›› 2017, Vol. 38 ›› Issue (12): 2843-2850.

温度对矢量喷管电液伺服系统影响研究

冯永保,孙飞,李淑智

火箭军工程大学发射工程系，陕西西安 710025,火箭军工程大学发射工程系，陕西西安 710025,火箭军工程大学发射工程系，陕西西安 710025

发布日期:2021-08-15
作者简介:冯永保，男，博士，教授，研究领域为液压技术和故障诊断方面的科研和教学工作。

Effects of Temperature on Vectoring Nozzle Electro-Hydraulic Servo System

Department of Launch Engineering，Rocket Force University of Engineering，Xi’an 710025，China,Department of Launch Engineering，Rocket Force University of Engineering，Xi’an 710025，China and Department of Launch Engineering，Rocket Force University of Engineering，Xi’an 710025，China

Published:2021-08-15

摘要/Abstract

摘要： 为研究液压油温度变化对矢量喷管电液伺服机构控制特性的影响，理论推导建立其数学模型，并利用AMESim软件搭建系统物理模型进行仿真计算。采用控制变量法，分组设置不同温度下的油液黏度参数，将批处理得到的结果对比分析。研究表明:随着温度升高，系统阶跃响应加快，滞环减小，线性度改善，频带宽度也增大；与此同时，阶跃响应的调节时间和超调量均增加，使喷管振动加剧。此外温度升高引起的油液黏度降低导致伺服阀的内泄漏快速增加，其中50℃时的泄漏量已是-20℃时的3倍，泄漏量增加将降低整个系统的效能。在仿真的基础上，依托“液压伺服控制实验测试平台”开展试验验证，两者结果基本一致，证明了仿真结论的正确性。

关键词: 温度；电液伺服系统；矢量喷管；AMESim；控制特性

Abstract: In order to study the effects of temperature variation of hydraulic oil on the control characteristics of vectoring nozzle electro-hydraulic servo mechanism， the mathematical model was built and the physical model constructed by AMESim was used to simulate the mechanism.By using control variable method， oil viscosity parameters corresponding to different temperatures were set.Then comparing and analyzing the results obtained by batch process， the consequences show that the speed of step response of system is accelerated when the temperature rises.At the same time， the hysteresis loop decreases， the linearity improves and the bandwidth increases.However， with the temperature rising， the adjusting time and overshoot volume all increase and the consequence is that the vibration of nozzle become severer.In addition， the decreasing of oil viscosity caused by rising temperature led to quick increase in leakage of servo valve and the leakage at 50℃ is three times as much as that one at -20℃.As the leakage increases， the efficiency of system decline.Depending on the simulation， experiment based on ‘Experiment test platform of hydraulic servo control system’ was done.The results of experiments are similar to that of simulation.Therefore， the correctness of the conclusion summarized from simulation is proved.

Key words: Temperature；Electro-hydraulic servo system；Vectoring nozzle；AMESim；Control characteristic

冯永保,孙飞,李淑智. 温度对矢量喷管电液伺服系统影响研究[J]. 推进技术, 2017, 38(12): 2843-2850.

FENG Yong-bao,SUN Fei,LI Shu-zhi. Effects of Temperature on Vectoring Nozzle Electro-Hydraulic Servo System[J]. Journal of Propulsion Technology, 2017, 38(12): 2843-2850.

参考文献

[1] 琚春光, 刘宇, 廖云飞. 固体塞式喷管二次喷射推力矢量控制[J]. 推进技术, 2007, 28(1): 78-81. (JU Chun-guang, LIU Yu, LIAO Yun-fei. Thrust Vector Control for Solid Plug Nozzle Based on Secondary Injection[J]. Journal of Propulsion Technology, 2007, 28(1): 78-81.)
[2] 朱学平, 祁鹏, 张晓峰, 等. 摆动喷管控制导弹鲁棒飞行控制系统设计[J]. 固体火箭技术, 2013, 36(4): 427-436.
[3] 李锋, 马承利, 王凯, 等. 矢量喷管伺服系统联合仿真与控制方案[J]. 兵工自动化, 2014, 33(9):10-14.
[4] 陈杰, 周文祥, 周永权, 等. 轴对称矢量喷管执行机构协同控制方案设计[J]. 航空发动机, 2013, 39(1): 30-33.
[5] 刘杰, 冯永保, 马承利, 等. 基于阀控缸结构的矢量喷管电液伺服系统频率特性分析[J]. 液压与气动, 2014, 34(11): 123-127.
[6] 王鑫, 武建新. 轴对称矢量喷管动力学仿真与分析[J]. 机械设计与制造, 2010, 36(10): 106-109.
[7] Vladeta Zmijanovic, Luc Leger, Eric Depussay, et al. Experimental-Numerical Parametric Investigation of a Rocket Nozzle Secondary Injection Thrust Vectoring[J].Journal of Propulsion and Power, 2016, 32(1): 196-213.
[8] 冯永保, 刘杰, 李荣, 等. 基于AMESim与MATLAB的矢量喷管电液伺服系统建模与仿真研究[J]. 机床与液压, 2015, 43(4): 118-121.
[9] Tanasak Samakwong, Wudhichai Assawinchaichote. PID Controller Design for Electro-Hydraulic Servo Valve System with Genetic Algorithm[J]. Procedia Computer Science, 2016, 86(23): 91-94.
[10] Wojciech Sochacki. Modelling and Analysis of Damped Vibration in Hydraulic Cylinder[J]. Mathematical and Computer Modelling of Dynamical Systems, 2015, 21(1): 23-37.
[11] 杨锡武, 何保成, 任凤升, 等. 某型弹用冲压发动机巡航段供油振荡的数值仿真[J]. 推进技术, 2006, 27(2): 158-161. (YANG Xi-wu, HE Bao-cheng, REN Feng-sheng, et al. Numerical Simulation for Ram Jet Cruising Stage Fuel-Supplied Oscillation[J]. Journal of Propulsion Technology, 2006, 27(2): 158-161.)
[12] 施康. 基于AMESim仿真的电液伺服系统故障诊断研究[D]. 武汉:武汉科技大学, 2009.
[13] Changhai Liu, Hongzhou Jiang. A Seventh-Order Model for Dynamic Response of an Electro-Hydraulic Servo Valve[J]. Chinese Journal of Aeronautics, 2014, 27(6): 1605-1611.
[14] 李树成, 徐银丽, 刘念. 基于AMESim的电液伺服阀试验和仿真研究[J]. 机床与液压, 2013, 41(17): 166-168.
[15] 刘小初, 叶正茂, 韩俊伟, 等. 基于AMESim软件的三级电液伺服阀建模与仿真[J]. 机床与液压, 2008, 36(11): 135-136.
[16] Yongcun Guo, Minjian Xing, Kun Hu. Modeling and Simulation of the Hydraulic Height Adjustment System of Mobile Tail Based on AMESim[J]. Advanced Materials Research, 2012, 591(34): 611-614.
[17] 中国航空材料手册编辑委员会. 中国航空材料手册[M]. 北京:中国标准出版社, 1989.
[18] Zmijanovic V, Lago V, Sellam M, et al. Thrust Shock Vector Control of an Axisymmetric Conical Supersonic Nozzle Via Secondary Transverse Gas Injection[J]. Shock Waves, 2014, 24(1): 97-111.
[19] 刘杰. 矢量喷管电液伺服系统频率特性与控制策略研究[D]. 西安:第二炮兵工程大学, 2013.(编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2016-08-09；修订日期:2016-09-28。作者简介:冯永保,男,博士,教授,研究领域为液压技术和故障诊断方面的科研和教学工作。E-mail:1797434924@qq.com