超声速气流中液体横向射流雾化破碎模型改进

推进技术 ›› 2017, Vol. 38 ›› Issue (2): 416-423.

超声速气流中液体横向射流雾化破碎模型改进

杨东超,朱卫兵,孙永超,陈宏

哈尔滨工程大学航天与建筑工程学院，黑龙江哈尔滨 150001,哈尔滨工程大学航天与建筑工程学院，黑龙江哈尔滨 150001,哈尔滨工程大学航天与建筑工程学院，黑龙江哈尔滨 150001,哈尔滨工程大学航天与建筑工程学院，黑龙江哈尔滨 150001

发布日期:2021-08-15
作者简介:杨东超，男，博士生，研究领域为两相超声速湍流燃烧。
基金资助:
高超声速冲压发动机技术重点实验室开放基金项目(20140103006)。

Modification of Atomization Breakup Model for Liquid Jet into Supersonic Crossflow

College of Aerospace and Civil Engineering，Harbin Engineering University，Harbin 150001，China,College of Aerospace and Civil Engineering，Harbin Engineering University，Harbin 150001，China,College of Aerospace and Civil Engineering，Harbin Engineering University，Harbin 150001，China and College of Aerospace and Civil Engineering，Harbin Engineering University，Harbin 150001，China

Published:2021-08-15

摘要/Abstract

摘要： 为研究超声速气流中液体横向射流的雾化过程，根据可压缩条件下线性稳定性分析解推导出的不稳定增长率和波数间的色散关系，对KH/RT模型进行了改进，并调整了离散相液滴的追踪算法，利用改进的KH/RT模型对1.94Ma气流条件下水横向射流过程进行模拟。研究表明，数值模拟中液滴的实际追踪数对计算结果有较大影响，而改进的液滴追踪算法有效增加了液滴数，提高了计算准确性；改进的KH/RT模型扩大了Weber数的适用上限至4000，可用于超声速流场；利用改进的KH/RT破碎模型得到的液雾穿透深度与试验测量结果基本一致，而液雾展向和近壁区的分布与试验有一定差异。

关键词: 横向射流；二次破碎；线性不稳定性；雾化；KH/RT模型

Abstract: In order to study the atomization process of liquid jet into supersonic crossflow，the original KH/RT model was improved，which was based on the dispersion relation between the unstable growth rate and wave number，according to the compressible linear stability analysis theory. And the tracking algorithm of the dispersed phase droplets was also modified to adjust the supersonic condition. The modified KH/RT model was used to simulate the atomization process of liquid jet into a 1.94 Mach supersonic crossflow. The obtained results indicate that，the tracking number of the droplets in simulation has a great influence on the results，and the new droplet tracking algorithm improves the calculation accuracy，by increasing the tracking number of droplets. Besides，the improved KH/RT model expands the upper limit of liquid Weber number to 4000，which makes the model more suitable for supersonic flow. The liquid penetration height obtained by the modified KH/RT model matches experimental measurement well; however，there is still some difference in the spanwise direction and the near wall region of particles distribution.

Key words: Jet into crossflow；Secondary breakup；Linear instability；Atomization；KH/RT model

杨东超,朱卫兵,孙永超,陈宏. 超声速气流中液体横向射流雾化破碎模型改进[J]. 推进技术, 2017, 38(2): 416-423.

YANG Dong-chao,ZHU Wei-bing,SUN Yong-chao,CHEN Hong. Modification of Atomization Breakup Model for Liquid Jet into Supersonic Crossflow[J]. Journal of Propulsion Technology, 2017, 38(2): 416-423.

参考文献

[1] 俞刚, 范学军. 超声速燃烧与高超声速推进[J]. 力学进展, 2013, 43(5): 449-471.
[2] 冮强, 周乐仪, 覃正, 等. 液体碳氢燃料超燃冲压发动机支板凹槽稳焰技术试验[J]. 推进技术, 2011, 32(5): 680-683. (GANG Qiang, ZHOU Le-yi, QIN Zheng, et al. Experimental Investigation of Strut-Cavity Flameholder Technology in Liquid Hydrocarbon Fueled Scramjet Combustor[J]. Journal of Propulsion Technology, 2011, 32(5): 680-683.)
[3] 刘林峰, 徐胜利, 郑日恒, 等. 超声速气流中凹槽结构煤油喷射和掺混研究[J]. 推进技术, 2010, 31(6):721-729. (LIU Lin-feng, XU Sheng-li, ZHENG Ri-heng, et al. Studies on Kerosene Injection and Mixing with Cavity in Supersonic Flow[J]. Journal of Propulsion Technology, 2010, 31(6): 721-729.)
[4] 仝毅恒, 李清廉, 吴里银, 等. 超声速气流中液体横向射流组合喷注特性实验[J]. 国防科技大学学报, 2014, 36(2): 73-80.
[5] 金仁瀚, 张铮, 刘勇, 等. 横向加热气流中直射式喷嘴侧喷雾化特性研究[J]. 推进技术, 2013, 34(5): 658-663. (JIN Ren-han, ZHANG Zheng, LIU Yong, et al. Experimental Study on Atomization Characteristics of Simple Nozzle in Heating Cross Flow[J]. Journal of Propulsion Technology, 2013, 34(5): 658-663.)
[6] Wang Z, Wu L, Li Q, et al. Experimental Investigation on Structures and Velocity of Liquid Jets in a Supersonic Crossflow[J]. Applied Physics Letters, 2014, 105(13).
[7] Lin K C, Kennedy P J, Jackson T A. Structures of Water Jets in a Mach 1.94 Supersonic Crossflow[R]. AIAA 2004-0971.
[8] Wu L, Wang Z, Li Q, et al. Investigations on the Droplet Distributions in the Atomization of Kerosene Jets in Supersonic Crossflows[J]. Applied Physics Letters, 2015, 107(10).
[9] Reitz R. Modeling Atomization Processes in High-Pressure Vaporizing Sprays[J]. Atomitation and Spray Technology, 1987, 3(4): 309-337.
[10] Pattersonm A. Modeling the Effects of Fuel Injection Characteristics on Diesel Combustion and Emissions [D]. Madison: University of Wisconsin-Madison, 1997.
[11] 刘晨. 复杂燃烧流场数值模拟方法研究[D]. 南京:南京航空航天大学, 2009.
[12] Im K S, Lin K C, Lai M C, et al. Breakup Modeling of a Liquid Jet in Cross Flow[J]. International Journal of Automotive Technology, 2011 , 12(4): 489-496. ?
[13] 刘静, 徐旭. 两种雾化模型在横向流雾化数值模拟中的应用[J]. 航空动力学报, 2013, 28 (7): 1441-1448.
[14] Ibrahim E A, Jackson S L. Spatial Instability of a Liquid Sheet in a Compressible Gas[J]. Journal of Colloid and Interface Science, 1996, 180(2): 629-631.
[15] Tharakan T J, Ramamurthi K. Influence of Liquid and Gas Compressibility on the Growth of Waves in Thin Liquid Sheets[J]. Fluid Dynamics Research, 2010, 42(3).
[16] Chen T, Li X. Liquid Jet Atomization in a Compressible Gas Stream[J]. Journal of Propulsion and Power, 1999, 15(3): 369-376.
[17] Taylor G I. The Shape and Acceleration of a Drop in a High Speed Air Stream[J]. The Scientific Papers of GI Taylor, 1963, (3): 457-464.
[18] Reitz R D, Bracco F V. Mechanism of Atomization of a Liquid Jet [J]. Physics of Fluids, 1982, 25(10).
[19] 曹建明. 液体喷雾学[M]. 北京:北京大学出版社, 2013.　　收稿日期:2016-10-24；修订日期:2016-11-10。基金项目:高超声速冲压发动机技术重点实验室开放基金项目(20140103006)。作者简介:杨东超,男,博士生,研究领域为两相超声速湍流燃烧。E-mail: yangdongchao500@126.com(编辑:梅瑛)