多喷管液体火箭动力系统尾焰冲击特性研究

推进技术 ›› 2017, Vol. 38 ›› Issue (3): 498-503.

多喷管液体火箭动力系统尾焰冲击特性研究

乔野,聂万胜,吴高杨,蔡红华,丰松江

中国人民解放军装备学院航天装备系，北京 101416,中国人民解放军装备学院航天装备系，北京 101416,中国人民解放军装备学院航天装备系，北京 101416,中国人民解放军装备学院航天装备系，北京 101416,中国人民解放军装备学院航天装备系，北京 101416

发布日期:2021-08-15
作者简介:乔野，男，硕士生，研究领域为液体火箭发动机。
基金资助:
国家自然科学基金(51206185；91441123)。

Research on Plume Impact Characteristics of Multi-Nozzle Rocket Propulsion System

Department of Space Equipment，Equipment Academy of PLA，Beijing 101416，China,Department of Space Equipment，Equipment Academy of PLA，Beijing 101416，China,Department of Space Equipment，Equipment Academy of PLA，Beijing 101416，China,Department of Space Equipment，Equipment Academy of PLA，Beijing 101416，China and Department of Space Equipment，Equipment Academy of PLA，Beijing 101416，China

Published:2021-08-15

摘要/Abstract

摘要： 为深入研究多喷管液体火箭动力系统尾焰冲击特性，以由多喷管液体火箭动力系统构成的发射平台为研究对象，采用三维N-S方程描述尾焰冲击流动过程，采用Realizable k-ε湍流模型封闭流动方程组，并运用压力的隐式算子分割(PISO)算法进行求解，得到了火箭动力系统尾焰对不同导流面导流槽的冲击流场参数。结果表明:导流面上受冲击影响最大的是沿喷管轴线方向的正冲击区域，且助推器尾焰对导流面的冲击效应相比于芯级更加强烈。锥形导流面对多喷管动力系统尾焰具有很好的引射和导流作用，相比于楔形导流面更能降低尾焰的冲击影响，但会在流场中形成漩涡并卷吸高温燃气，可能对发射系统造成破坏，需要增加相应的热防护措施。

关键词: 多喷管；液体火箭发动机；尾焰；导流槽；冲击

Abstract: To take more research about plume impact characteristics of multi-nozzle rocket propulsion system，the launch platform consisted with multi-nozzle rocket propulsion system is taken as the research object. The three-dimensional N-S equations are used to describe the impact flow process. The Realizable k-ε model is coupled with the flow equations，and the PISO algorithm is used to solve the N-S equations. The parameters of impact flow-field on different deflecting-plane are acquired. The simulation results indicate that the most serious impact regions are along the axis of engines on the deflecting plane，the boosters’ impingement is much stronger than the core vehicle. The cone-plane is of better deflecting function for the multi-nozzle propulsion system plume，and can do a better job to reduce the impact effect of plume than the wedge-plane. However，reversed flow is formed on the cone-plane and it may bring the hot exhaust and heat up the air around the launch platform which may destroy the system. So relevant protective measures are necessary to be taken.

Key words: Multi-nozzle；Liquid rocket engine；Plume；Flame-deflector；Impact

乔野,聂万胜,吴高杨,蔡红华,丰松江. 多喷管液体火箭动力系统尾焰冲击特性研究[J]. 推进技术, 2017, 38(3): 498-503.

QIAO Ye,NIE Wan-sheng,WU Gao-yang,CAI Hong-hua,FENG Song-jiang. Research on Plume Impact Characteristics of Multi-Nozzle Rocket Propulsion System[J]. Journal of Propulsion Technology, 2017, 38(3): 498-503.

参考文献

[1] Terry G, David S, Robert P. Analysis of Rocket Propellant Engine Exhaust Plumes[R]. AIAA 70-0844.
[2] William J, Darshan S. Observations on Jet Flows from a Two-Dimensional, Under-Expanded, Sonic Nozzle[J]. AIAA Journal, 1968, 6(3): 540-542.
[3] Cain T M, Morris N A, Roberts T P, et al. A Comparison of Numerical Predictions and Experiments on Under-Expanded Jets[R]. AIAA 92-4027.
[4] Lee K S, Hong S K. Supersonic Jet Impingement Navier-Stokes Computations for Vertical Launching System Design Applications[J]. Journal of Spacecraft and Rockets, 2004, (5): 735-744.
[5] Tsuboi N, Hayashi A K, Toshi F, et al. Numerical Simulation of a Supersonic Jet Impingement on Ground[C]. United States: International Pacific Air and Space Technology Conference and Aircraft Symposium, 1991.
[6] Giordan P, Fleury P, Guidon L. Simulation of Water Injection into a Rocket Motor Plume[R]. AIAA 99-2517.
[7] Daniel C A, Vineet A. Computational Plume Modeling of Conceptual ARES Vehicle Stage Tests[R]. AIAA 2007-5708.
[8] Bruce T V. Multiphase Modeling of Water Injection on Flame Deflector[R]. AIAA 2013-2592.
[9] 于勇, 徐新文, 傅德彬. 同心筒发射装置燃气排导的气体动力学原理分析[J]. 航空动力学报, 2012, 27(3): 501-507.
[10] 傅德彬, 姜毅. 用动网格方法模拟导弹发射过程中的燃气射流流场[J]. 宇航学报, 2007, 28(2): 423-426.
[11] 姜毅, 周帆, 张学文. 超声速高温冲击射流注水流场实验研究[J]. 实验流体力学, 2011, 25(4): 32-36.
[12] 周帆, 姜毅, 郝继光. 火箭发动机尾焰流场注水降温效果初探[J]. 推进技术, 2012, 33(2): 249-252. (ZHOU Fan, JIANG Yi, HAO Ji-guang. Exploring on Cooling Effect of Water Injection on Rocket Motor Exhaust[J]. Journal of Propulsion Technology, 2012, 33(2): 249-252.)
[13] 马艳丽, 姜毅, 王伟臣, 等. 喷水对火箭发动机羽流红外特性的抑制作用研究[J]. 北京理工大学学报, 2011, 31(7): 776-780.
[14] 徐悦, 周旭, 张志成, 等. 火箭发动机燃气射流喷水降噪研究[J]. 航空动力学报, 2010, 25(4): 816-820.
[15] 罗天培, 李茂. 火箭发动机试车台导流槽喷水冷却研究[C]. 北京:中国宇航学会液体火箭推进专业委员会既集团公司科技委液体及特种推进技术专业组2014年学术研讨会, 2014.
[16] 李茂, 王占林. 氢氧火箭发动机射流仿真与试验台热防护[J]. 载人航天, 2014, 20(5): 421-426.
[17] 乔野, 聂万胜, 丰松江, 等. 多喷管液体火箭动力系统尾焰流场特性研究[J]. 推进技术, 2017, 38(2). (QIAO Ye, NIE Wan-sheng, FENG Song-jiang, et al. Research on the Plume Flow-Field Characteristics of Multi-Nozzle Rocket Propulsion System[J]. Journal of Propulsion Technology, 2017, 38(2).)
[18] 蔡红华, 聂万胜, 丰松江. 复燃对液氧煤油发动机尾焰冲击特性影响[J]. 推进技术, 2016, 37(9). (CAI Hong-hua, NIE Wan-sheng, FENG Song-jiang. The Effect of Afterburning on the Impact Characteristics of LOX/Kerosene Rocket Engine Plume[J]. Journal of Propulsion Technology, 2016, 37(9).)
[19] 陶文铨. 数值传热学[M]. 西安:西安交通大学出版社, 1988.
[20] FENG Song-jiang, CHENG Yu-feng, NIE Wan-sheng.Combustion Instability Analysis in a Hydrogen-Oxygen Rocket Engine[R]. AIAA 2009-4864.　　　　　　　　　　　　　　收稿日期:2015-10-04；修订日期:2015-11-18。基金项目:国家自然科学基金(51206185；91441123)。作者简介:乔野,男,硕士生,研究领域为液体火箭发动机。E-mail: jony322@126.com(编辑:田佳莹)