开口双肋凹槽式涡轮叶顶间隙流动数值研究

推进技术 ›› 2017, Vol. 38 ›› Issue (4): 815-827.

开口双肋凹槽式涡轮叶顶间隙流动数值研究

崔涛¹,汪帅¹,张伟²,温风波¹,王松涛¹,周逊¹,王仲奇¹

哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150001,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150001,杭州汽轮机股份有限公司工业透平研究院，浙江杭州 310022,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150001,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150001,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150001,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150001

发布日期:2021-08-15
作者简介:崔涛，男，博士生，研究领域为叶轮机械气动热力学。E-mail: cui.tao.1988@163.com 通讯作者:温风波，男，博士，讲师，研究领域为气冷涡轮气动优化设计体系。
基金资助:
国家自然科学基金(51206035；51121004)。

Numerical Investigation of Opening Double Squealer Groove Turbine Tip Clearance Flow Character

School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150001，China,School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150001，China,Hangzhou Steam Turbine CO.，Ltd.Industrial Steam Turbine Institute，Hangzhou 310022，China,School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150001，China,School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150001，China,School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150001，China and School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150001，China

Published:2021-08-15

摘要/Abstract

摘要： 为研究改进的双肋凹槽叶顶结构对大折转角动叶间隙泄漏流动的影响，利用数值模拟的手段，对五种不同叶顶结构在低马赫数为0.3条件下的泄漏损失以及流动特性进行详细的研究分析。数值计算与实验测量结果进行对比校核以保证数值计算的可靠性。研究结果表明，改进的前尾缘开口的凹槽式叶顶结构使得叶栅总压损失降低7.4%，与前缘不开口的方案相比，间隙泄漏损失变化率降低23%，这对涡轮长期运行维持高效的性能有利。改进的叶顶结构对间隙内的流量分布影响明显，压力侧的泄漏流量减少26.7%，而吸力侧增加13.3%。前缘开口形式结构使得压力侧泄漏的驱动压差降低50%，并改变吸力侧泄漏流的流量系数，同样出口气流角展向分布和叶栅流道中的泄漏涡和通道涡均受到明显影响。

关键词: 双肋；开口前缘；间隙泄漏；涡轮；数值研究；驱动压差；流量系数

Abstract: To investigate the leakage flow characteristic impacted by the modified double squealer groove tip of a large camber angle rotor blade profile，five different kinds of tip geometries with different clearance height were studied at low Mach number，i.e.，0.3 by using computational fluid dynamics (CFD). The tip leakage flow loss and flow characteristic were studied in detail. The numerical method was validated by using experiment data to ensure the reliability of numerical simulation. The results illustrate that it is beneficial to use the opening leading edge and trailing edge of the double squealer groove tip to reduce the leakage loss by 7.4% and leakage loss change rate by 23% compared with closed leading edge tip，which is beneficial to keep the good turbine performance for long time. The opening leading edge tip also have an effect on changing the mass flow across the tip squealers，the mass flow across the pressure side increases by 26.7%，while decreases by 13.3% across the suction side. The driving pressure difference of the pressure side squealer leakage flow is reduced by 50% and the discharge coefficient of the suction squealer is changed clearly with using opening leading edge tip，which also impacts the spanwise distribution of outlet flow angle，the leakage vortex and the passage vortex obviously.

Key words: Double squealer；Opening leading edge；Clearance leakage flow；Turbine；Numerical investigation；Driving pressure difference；Discharge coefficient

崔涛,汪帅,张伟,温风波,王松涛,周逊,王仲奇. 开口双肋凹槽式涡轮叶顶间隙流动数值研究[J]. 推进技术, 2017, 38(4): 815-827.

CUI Tao¹,WANG Shuai¹,ZHANG Wei²,WEN Feng-bo¹,WANG Song-tao¹,ZHOU Xun¹,WANG Zhong-qi¹. Numerical Investigation of Opening Double Squealer Groove Turbine Tip Clearance Flow Character[J]. Journal of Propulsion Technology, 2017, 38(4): 815-827.

参考文献

[1] Bunker R S.Axial Turbine Blade Tips: Function,Design, and Durability[J]. Journal of Propulsion and Power, 2006, 22(2): 271-285.
[2] Booth T C, Dodge P R, Hepworth H K. Rotor-Tip Leakage: Part I—Basic Methodology[J]. Journal of Engineering for Gas Turbines and Power, 1982, 104(1):154-161.
[3] Spirkl A. MTR390, The New Generation Turbo-Shaft Engine[R].AGARD-CP-537, 1993.
[4] Schaub U W, Vlasic E, Moustapha S H. Effect of Tip Clearance on the Performance of a Highly Loaded Turbine Stage[R]. AGARD-CP-537, 1993.
[5] Yamamoto A. Endwall Flow/Loss Mechanisms in a Linear Turbine Cascade with Blade Tip Clearance[J]. Journal of Turbomachinery, 1989, 111(3): 264-275.
[6] Morphis G, Bindon J P. The Effects of Relative Motion, Blade Edge Radius and Gap Size on the Blade Tip Pressure Distribution in an Annular Turbine Cascade with Clearance[R]. ASME 88-GT-256.
[7] Xiao X, McCarter A A, Lakshminarayana B. Tip Clearance Effects in a Turbine Rotor:Part I-Pressure Field and Loss[J]. Transactions of the ASME-T-Journal of Turbomachinery, 2001, 123(2): 296-304.
[8] Nho Y C, Park J S, Lee Y J, et al. Effects of Turbine Blade Tip Shape on Total Pressure Loss and Secondary Flow of a Linear Turbine Cascade[J]. International Journal of Heat and Fluid Flow, 2012, 33(1): 92-100.
[9] Harvey N W, Ramsden K. A Computational Study of a Novel Turbine Rotor Partial Shroud[J]. Journal of Turbomachinery, 2001, 123(3): 534-543.
[10] Schabowski Z, Hodson H. The Reduction of Over Tip Leakage Loss in Unshrouded Axial Turbines Using Winglets and Squealers[J]. Journal of Turbomachinery, 2007, 136(4): 663-675.
[11] Schabowski Z, Hodson H, Giacche D, et al. Aeromechanical Optimisation of a Winglet-Squealer Tip for an Axial Turbine[J]. Journal of Turbomachinery, 2010, 136(7): 1593-1607.
[12] 牛茂升. 涡轮间隙流动主动控制的试验研究及数值模拟[D]. 上海:上海交通大学, 2010.
[13] 杜昆, 宋立明, 李军. 凹槽状叶顶涡轮叶片传热特性的数值研究[J]. 推进技术, 2014, (5): 618-623. (DU Kun, SONG Li-ming, LI Jun. Numerical Investigations on Heat Transfer Characteristics of Turbine Blade with Squealer Tip[J]. Journal of Propulsion Technology, 2014, 35(5): 618-623.)
[14] 杨佃亮, 丰镇平. 叶顶凹槽对燃气透平动叶气动性能及叶顶传热的影响[J]. 西安交通大学学报, 2008, 42(7): 838-842.
[15] 李伟, 乔渭阳, 许开富, 等. 涡轮叶尖泄漏流被动控制数值模拟[J]. 推进技术, 2008, 29(5): 591-597. (LI Wei, QIAO Wei-yang, XU Kai-fu, et al. Numerical Simulation of Passive Control on Tip Leakage Flow in Axial Turbine[J]. Journal of Propulsion Technology, 2008, 29(5): 591-597.)
[16] 顾永根. 航空发动机设计手册(第6分册). 涡桨与涡轴发动机总体[M]. 北京:航空工业出版社, 2001.
[17] Hermanson K S, Thole K A. Effect of Inlet Conditions on Endwall Secondary Flows[J]. Journal of Propulsion and Power, 2000, 16(2): 286-296.
[18] Hourmouziadis J, Albrecht G. An Integrated Aero/Mechanical Performance Approach to High Technology Turbine Design[R]. AGARD-CP-421, 1987.
[19] Denton J D. The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines[J]. Journal of Turbomachinery, 1993, 115(4): 621-656.　　　　　　　　　　　　　*　收稿日期:2015-12-19；修订日期:2016-03-18。基金项目:国家自然科学基金(51206035；51121004)。作者简介:崔涛,男,博士生,研究领域为叶轮机械气动热力学。E-mail: cui.tao.1988@163.com通讯作者:温风波,男,博士,讲师,研究领域为气冷涡轮气动优化设计体系。E-mail: fengbo@hit.edu.cn(编辑:梅瑛)