喷头运动对水下气幕生成特性影响的研究

推进技术 ›› 2017, Vol. 38 ›› Issue (4): 954-960.

• 材料推进剂燃料 • 上一篇

喷头运动对水下气幕生成特性影响的研究

周良梁,余永刚

南京理工大学能源与动力工程学院，江苏南京 210094,南京理工大学能源与动力工程学院，江苏南京 210094

发布日期:2021-08-15
作者简介:周良梁，男，博士生，研究领域为火炮水下发射技术。E-mail: zllnjust@163.com 通讯作者:余永刚，男，博士，教授，研究领域为现代发射理论与技术。
基金资助:
国家自然科学基金资助(11372139)；江苏省研究生培养创新工程项目(KYLX15_0391)。

Study of Sprayer Movement Influence on Underwater Gas-Curtain Generation Characteristics

School of Energy and Power Engineering，Nanjing University of Science and Technology，Nanjing 210094，China and School of Energy and Power Engineering，Nanjing University of Science and Technology，Nanjing 210094，China

Published:2021-08-15

摘要/Abstract

摘要： 为了了解充液圆管内喷头运动过程中的气幕生成特性，采用高速摄像技术记录了喷头运动条件下多股燃气汇聚生成气幕过程。在实验基础上，建立了多股燃气射流在受限液体中扩展的三维非稳态数学模型，对实验工况进行了数值分析，气幕顶端扩展位移的计算值与实测值吻合较好。在此基础上，对比分析相同喷射条件下喷头运动与否对水下气幕生成特性的影响，结果表明:喷头运动，抑制了流场回流作用，增强了对气幕前端液体的推动作用，8ms时气幕运动速度由10m/s增大到11m/s；增大了喷头下游流场压力，8ms时运动喷头表面轴向受力增大了18%；降低了气幕顶部中心区域温度，但提高了壁面处温度。

关键词: 水下推进；气幕生成特性；多股燃气射流；气液相互作用；数值模拟

Abstract: To understand the gas-curtain generation characteristics in the liquid tube during sprayer moving process，the high speed video camera is applied to record the merging process of multi combustion gas jets with the motion of sprayer. On the base of experimental results，the three-dimensional unsteady mathematic model of the multi gas jets expansion process in the confined liquid medium is established，and simulation is conducted under the experimental condition. Simulated axial displacement of the gas-curtain is in a good agreement with experiment data. Contrastive analysis on the difference between moving sprayer and stationary sprayer is conducted under the same injection pressure，and effects of sprayer motion on generation of underwater gas-curtain are discussed. The numerical results indicate that with motion of sprayer，the backflow of the flow flied is restrained and push to liquid above the gas-curtain is enhanced，the expansion velocity of the gas-curtain increased from10m/s to 11m/s at 8ms. The pressure in downstream area of the sprayer increased and the axial force on the sprayer increased by 18% at 8ms. The temperature in the center area is decreased，but it is enhanced on the chamber wall.

Key words: Underwater propulsion；Gas-curtain generation characteristics；Multi combustion gas jets；Gas-liquid interaction；Numerical simulation

周良梁,余永刚. 喷头运动对水下气幕生成特性影响的研究[J]. 推进技术, 2017, 38(4): 954-960.

ZHOU Liang-liang,YU Yong-gang. Study of Sprayer Movement Influence on Underwater Gas-Curtain Generation Characteristics[J]. Journal of Propulsion Technology, 2017, 38(4): 954-960.

参考文献

[1] 孔德仁, 王昌明, 柳光辽, 等. 水下枪械内弹道基本方程组及其设计[J]. 南京理工大学学报, 1999, 23(03): 9-12.
[2] 刘育平, 李金新, 杨臻, 等. 水下炮内弹道分析与数值仿真[J]. 火炮发射与控制学报, 2007, (3): 30-33.
[3] Kassner M E, Lowry R W, Rosen R S. High Temperature Properties of Alloys Being Considered for Design of a Concentric Canister Launcher[R]. NSWCDD-TR-98/72.
[4] Yagla J, Deloach K, Weiland C. Water Piercing Missile Launcher[R]. PAT-APPL-09812270.
[5] Yagla J, John B, Koski S. Launch Dynamics Environment of a Water Piercing Missile Launcher[C]. Louisiana: 24th International Symposium on Ballistics, 2008: 1-17.
[6] Weiland C, Vlachos P, Yagla J. Concept Analysis and Laboratory Observations on a Water Piercing Missile Launcher[J]. Ocean Engineering, 2010, 37: 959-965.
[7] 侯金瑛, 谭大成, 毕世华, 等. 同心筒发射潜载导弹过程数值研究[J]. 固体火箭技术, 2011, 34(1): 9-13.
[8] 曹嘉怡, 鲁传敬, 陈鑫, 等. 导弹水下热发射出筒过程流动特性[J]. 固体火箭技术, 2011, 34(3): 281-284.
[9] LIU Hai-jun, PENG Xing-zhi, ZOU Zhen-zhu. Effects of the Launch Speed on Hydrodynamic Force of the Underwater Vehicle Vertical Launch with the Gas Curtain[J]. Advanced Materials Research, 2012, 625: 84-87.
[10] 袁绪龙, 王亚东, 刘维. 同心筒水下发射内弹道建模与仿真研究[J]. 弹道学报, 2013, 25(2): 48-53.
[11] 王亚东, 袁绪龙, 张宇文, 等. 气泡弹性对同心筒水下发射影响研究[J]. 计算力学学报, 2013, 30(2): 313-318.
[12] 郭强, 施红辉, 王超, 等. 水下超声速气体射流气液两相复杂流动研究[J]. 工程热物理学报, 2012, 33(5): 809-812.
[13] 汤龙生, 刘宇, 吴智锋, 等. 水下超声速燃气射流气泡的生长及压力波传播特性实验研究[J]. 推进技术, 2011, 32(3): 417-420. (TANG Long-sheng, LIU Yu, WU Zhi-feng, et al. Experimental Study on Characteristics of Bubble Growth and Pressure Wave Propagation by Supersonic Gas Jets Under Water[J]. Journal of Propulsion Technology, 2011, 32(3): 417-420.)
[14] Linck M B, Gupta A K, Bourhis G. Combustion Characteristics of Pressurized Swirling Spray Flame and Unsteady Two-Phase Exhaust Jet[R]. AIAA 2006-377.
[15] Arghode V K, Gupta A K, Yu K H. Effect of Nozzle Exit Geometry on Submerged Jet Characteristics in Underwater Propulsion[R]. AIAA 2008-1158.
[16] 莽珊珊, 余永刚. 边界形状对高压受限射流扩展稳定性影响[J]. 推进技术, 2011, 32(3): 334-338. (MANG Shan-shan, YU Yong-gang. Effects of Chamber Wall Shape on High Pressure Gas Jet Expansion Stability in Bulk Loaded Liquid[J]. Journal of Propulsion Technology, 2011, 32(3): 334-338.)
[17] XUE Xiao-chun, YU Yong-gang, ZHANG Qi. Study on the Effect of Distance Between the Two Nozzle Holes on Interaction of High Pressure Combustion-Gas Jets with Liquid[J]. Energy Conversion and Management, 2014, 85: 675-686.(编辑:史亚红)　　　　　　　　　　　　　*　收稿日期:2015-11-27；修订日期:2016-02-11。基金项目:国家自然科学基金资助(11372139)；江苏省研究生培养创新工程项目(KYLX15_0391)。作者简介:周良梁,男,博士生,研究领域为火炮水下发射技术。E-mail: zllnjust@163.com通讯作者:余永刚,男,博士,教授,研究领域为现代发射理论与技术。E-mail: yyg801@njust.edu.cn

喷头运动对水下气幕生成特性影响的研究

Study of Sprayer Movement Influence on Underwater Gas-Curtain Generation Characteristics

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价