补油距离和燃油配比对两级脉冲爆震发动机预燃裂解的影响

推进技术 ›› 2017, Vol. 38 ›› Issue (5): 1073-1083.

补油距离和燃油配比对两级脉冲爆震发动机预燃裂解的影响

朱晓彬¹,陈鑫^1,2,张锋³,谭胜¹,何立明¹

空军工程大学航空航天工程学院，陕西西安 710038,空军工程大学航空航天工程学院，陕西西安 710038; 先进航空发动机协同创新中心，北京 100191,西安航天动力研究所，陕西西安 710000,空军工程大学航空航天工程学院，陕西西安 710038,空军工程大学航空航天工程学院，陕西西安 710038

发布日期:2021-08-15
作者简介:朱晓彬，男，硕士生，研究领域为推进系统气动热力理论与工程。
基金资助:
国家自然科学基金(51106178)。

Effects of Fuel-Addition Distance and Fuel Ratio on Precombustion and Thermal Cracking in 2-Stage PDE

Aeronautics and Astronautics Engineering College，Air Force Engineering University，Xi’an 710038，China,Aeronautics and Astronautics Engineering College，Air Force Engineering University，Xi’an 710038，China; Collaborative Innovation Center of Advanced Aero-Engine，Beijing 100191，China,Xi’an Aerospace Propulsion Institute，Xi’an 710100，China,Aeronautics and Astronautics Engineering College，Air Force Engineering University，Xi’an 710038，China and Aeronautics and Astronautics Engineering College，Air Force Engineering University，Xi’an 710038，China

Published:2021-08-15

摘要/Abstract

摘要： 两级脉冲爆震发动机中，预燃室内煤油预燃裂解的效果对共振腔内起爆效果和可靠性有重要影响。基于稳态扩散火焰面模型，对预燃室中煤油预燃裂解的效果进行了数值仿真，讨论了补油距离d和燃油配比R对预燃裂解效果的影响，以期为进一步的预燃室设计和实验研究提供参考。计算结果表明:补油距离d主要通过影响反应物的驻留时间来影响反应产物的生成，d越大，第二级喷油位置距离预燃室出口越近，驻留时间越短，各主要活性组分产量越低；燃油配比R则同时影响预燃室内的温度和反应物的驻留时间，R越大，各主要活性组分含量越低；温度过高时不利于较稳定的活性组分产生。由此建议补油喷嘴应尽量远离预燃室出口，最佳燃油配比为3～5。

关键词: 两级脉冲爆震发动机；预燃裂解；补油距离；燃油配比

Abstract: Precombustion and thermal cracking of kerosene in the precombustor of 2-Stage PDE have significant impacts on the effects and reliability of detonation in the resonant cavity. Based on the Steady Diffusion Flamelet Model，the effects of precombustion and cracking in precombustor were simulated. The influences of two factors were discussed—the fuel-addition distance(d)and fuel ratio(R)，expecting to provide references for precombustor design and further experiments. It is concluded that d affects the production of active species mainly through affecting the residence time of mixture in the precombustor，and the production of active species decreases with increasing d because of the reduction of distance to the outlet and the residence time. R affects the production of active species through affecting both the residence time and the temperature in the precombustor. Overall，the production of active species decreases with increasing R. Excessively high temperature has adverse effect on the generation of combustible active species. It is suggested that the fuel-addition nozzle should be as far from the outlet of the precombustor as possible. And the optimal fuel ratio is between 3～5.

Key words: 2-Stage PDE；Precombustion and cracking；Fuel-addition distance；Fuel ratio

朱晓彬,陈鑫,张锋,谭胜,何立明. 补油距离和燃油配比对两级脉冲爆震发动机预燃裂解的影响[J]. 推进技术, 2017, 38(5): 1073-1083.

ZHU Xiao-bin¹,CHEN Xin^1,2,ZHANG Feng³,TAN Sheng¹,HE Li-ming¹. Effects of Fuel-Addition Distance and Fuel Ratio on Precombustion and Thermal Cracking in 2-Stage PDE[J]. Journal of Propulsion Technology, 2017, 38(5): 1073-1083.

参考文献

[1] Bratkovich T E, Bussing T R A. A Pulse Detonation Engine Performance Model[R]. AIAA 95-3155.
[2] Arun K Sehra, Woodrow Whitlow Jr. Propulsion and Power for 21st Century Aviation[J]. Progress in Aerospace Sciences, 2004, 40(4): 199-235.
[3] Levin V A, Nechaev J N, Tarasov A I. A New Approach to Organizing Operation Cycles in Pulse Detonation Engines[C]. Moscow: In High-Speed Deflagration and Detonation: Fundamentals and Control, 2011: 223-238.
[4] Gelfand B E, Khomik S V, Bartenev A M, et al. Detonation and Deflagration Initiation at the Focusing of Shock Waves in Combustible Gaseous Mixture[J]. Shock Waves, 2000, 10(3): 197-204.
[5] Hao He, Zeng-Chan Zhang, John Yu S T. Application of the CESE Method to PDE Plume Dynamics Using a Beowulf Cluster[R]. AIAA 2002-0614.
[6] Cooper M, Shepherd J E. Experiments Studying Thermal Cracking, Catalytic Cracking, and Pre-Mixed Partial Oxidation of JP-10[R]. AIAA 2003-4687.
[7] 王春, 韩肇元, 司徒明. 激波聚焦引燃可燃混合气体的实验研究[J]. 推进技术, 2004, 25(1): 78-81. (WANG Chun, HAN Zhao-yuan, SITU Ming. Experimental Investigation on Ignition of Combustible Mixture by Shock Focusing [J]. Journal of Propulsion Technology, 2004, 25(1): 78-81.)
[8] Keith R McManus, Anthony J Dean. Experimental Evaluation of a Two-Stage Pulse Detonation Combustor[R]. AIAA 2005-3773.
[9] 滕宏辉, 王春, 邓博, 等. 可燃气体中激波聚焦的点火特性[J]. 力学学报, 2007, 39(2): 171-180.
[10] 李海鹏, 何立明, 陈鑫, 等. 凹面腔内激波聚焦起爆爆震波过程的数值模拟[J]. 推进技术, 2010, 31(1): 87-91. (LI Hai-peng, HE Li-ming, CHEN Xin, et al. Numerical Investigation of Detonation Initiation by Shock Wave Focusing over Paraboloid Reflector [J]. Journal of Propulsion Technology, 2010, 31(1): 87-91.)
[11] 荣康, 陈鑫, 何立明, 等. 暂冲式环形射流诱导非定常激波聚焦的机理研究[J]. 推进技术, 2015, 36(6): 824-831. (RONG Kang, CHEN Xin, HE Li-ming, et al. Investigation on Mechanism of Unsteady Shock Wave Focus Induced by Blowdown Imploding Annular Jet[J]. Journal of Propulsion Technology, 2015, 36(6): 824-831.)
[12] Ward T A, Ervin J S, Striebich R C, et al. Simulations of Flowing Mildly-Cracked Normal Alkanes Incorporating Proportional Product Distributions[J]. Journal of Propulsion and Power, 2004, 20(3): 394-402.
[13] Gascoin N, Gillard P. Supersonic Combustion of Hydrocarbon Pyrolysed Coolant with Detailed Chemistry[R]. AIAA 2011-3712.
[14] Bo Ruan, Hua Meng, Vigor Yang. Simplification of Pyrolytic Reaction Mechanism and Turbulent Heat Transfer of n-Decane at Supercritical Pressures[J]. International Journal of Heat and Mass Transfer, 2014, 69:455-463.
[15] 赵国柱, 宋文艳, 张若凌. 超临界态碳氢燃料流固耦合传热及热裂解的计算方法研究[J]. 推进技术, 2014, 35(12): 1639-1644. (ZHAO Guo-zhu, SONG Wen-yan, ZHANG Ruo-ling. Numerical Method Development for Conjugated Heat Transfer of Hydrocarbon Fuel with Thermal Cracking at Supercritical Conditions[J].Journal of Propulsion Technology, 2014, 35(12): 1639-1644.)
[16] Peters N. Laminar Diffusion Flamelet Models in Non-premixed Turbulent Combustion[J]. Progress in Energy and Combustion Science, 1984, 10(3): 319-359.
[17] 黄生洪, 徐胜利, 刘小勇. 煤油超燃冲压发动机两相流场数值研究(III)煤油在超燃流场中的多步化学反应特征[J]. 推进技术, 2005, 26(2): 101-105. (HUANG Sheng-hong, XU Sheng-li, LIU Xiao-yong. Combustion Flow of Kerosene Fueled Scramjet with 3D Cavity (III) Multistep Chemistry Characteristics of Kerosene[J]. Journal of Propulsion Technology, 2005, 26(2): 101-105.)
[18] 杨训, 张灿. 某型航空发动机涡轮后排气温度场测量[J]. 计算机测量与控制, 2013, 21(2): 333-335.
[19] 杨劲. 基本有机原料生产工艺学[M]. 山东:石油大学出版社, 1994.　　　　　　　　　　　*　收稿日期:2015-12-23；修订日期:2016-04-11。基金项目:国家自然科学基金(51106178)。作者简介:朱晓彬,男,硕士生,研究领域为推进系统气动热力理论与工程。E-mail: michealmushan@163.com(编辑:梅瑛)