CFD优化火箭涡轮泵间隙密封静动态特性计算模型

推进技术 ›› 2017, Vol. 38 ›› Issue (7): 1603-1609.

CFD优化火箭涡轮泵间隙密封静动态特性计算模型

夏鹏,王祥和,刘占生,温健全

哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150000,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150000,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150000,哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150000

发布日期:2021-08-15
作者简介:夏鹏，男，博士生，研究领域为动力机械间隙密封设计和轴系故障诊断。
基金资助:
国家自然科学基金(11176010)。

CFD Optimized Calculation of Static and Dynamic Characteristics for Annular Seals in Rocket Turbo Pumps

School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150000，China,School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150000，China,School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150000，China and School of Energy Science and Engineering，Harbin Institute of Technology，Harbin 150000，China

Published:2021-08-15

摘要/Abstract

摘要： Bulk flow模型被广泛应用于计算火箭涡轮泵间隙密封泄漏量和动力学系数，然而半经验性的边界条件和阻力系数会降低模型的准确性。CFD数值模拟近年来被应用于间隙密封的研究，表现出优越的性能，然而瞬态计算动力学系数效率较低。结合两种方法的优势，利用CFD稳态流场分布，计算密封间隙边界条件，同时基于泄漏量相等优化目标，确定Bulk flow模型中阻力系数，并采用有限单元法数值求解优化后Bulk flow方程组。与文献中数值结果对比，数值结果与试验结果更加吻合，主刚度和交叉刚度最大偏差率为10.15%和7.54%。

关键词: 涡轮泵；间隙密封；计算流体动力学；泄漏量；动力学系数

Abstract: Bulk flow model are widely used to calculate leakage rate and rotordynamic coefficients for annular seals in rocket turbo pumps. However，semi-empirical boundary condition and resistance factor are detrimental for the model accuracy. Computational fluid dynamics approach has been used to conduct annular seal analysis and demonstrated superiority，while calculating rotordynamic coefficients at large computational time costs. To take advantage of two approach，based on CFD steady flow field results，boundary conditions of bulk flow model were determined，and then resistance factor was obtained with optimization objective that leakage rate was the same of two approach. FE method was adopted to solve optimized bulk flow equations. Compared with results in reference，predictions of the present method had an improved agreement with experimental data，and maximum deviation of direct stiffness and coupled stiffness were，respectively，10.15% and 7.54%.

Key words: Turbo pump；Annular seal；Computational fluid dynamics；Leakage；Rotordynamic coefficients

夏鹏,王祥和,刘占生,温健全. CFD优化火箭涡轮泵间隙密封静动态特性计算模型[J]. 推进技术, 2017, 38(7): 1603-1609.

XIA Peng,WANG Xiang-he,LIU Zhan-sheng,WEN Jian-quan. CFD Optimized Calculation of Static and Dynamic Characteristics for Annular Seals in Rocket Turbo Pumps[J]. Journal of Propulsion Technology, 2017, 38(7): 1603-1609.

参考文献

[1] Manoj K Gupta,Thomas A Soulas, Dara W Childs. New Steps to Improve Rotordynamic Stability Predictions of Centrifugal Compressors[J]. Journal of Engineering for Gas Turbines and Power, 2008, 130(2): 1-8.
[2] Naitik J Mehta, Dara W Childs. Measured Comparison of Leakage and Rotordynamic Characteristics for a Slanted-Tooth and a Straight-Tooth Labyrinth Seal[J]. Journal of Engineering for Gas Turbines and Power, 2014, 136(1): 1-11.
[3] Pascal Jolly, Amine Hassini, Mihai Arghir, et al. Experimental and Theoretical Rotordynamic Coefficients of Smooth and Round-Hole Pattern Water Fed Annular Seals[R]. ASME 2014-GT-25677.
[4] Yong-Bok Lee, Chang-Ho Kim, Wenbo Duan, et al. Analysis of Leakage Flow and Dynamic Characteristics in Floating Ring Seals for High Pressure Turbopump[R]. ASME 2006-GT- 91008.
[5] Li J, San Andres L, Vance J. Bulk-Flow Analysis of Multiple-Pocket Gas Damper Seals[J]. Journal of Engineering for Gas Turbines and Power, 1999, 121(2): 355-363.
[6] Childs D, Turbomachinery Rotordynamics; Phenomena, Modeling, and Analysis[M]. New York: John Wiley & Sons, 1993.
[7] Larry A Villasmil, Dara W Childs, Hamn-Ching Chen.Understanding Friction Factor Behavior in Liquid Annular Seals with Deliberately Roughened Surfaces[J]. Journal of Tribology, 2005, 127(1): 213-222.
[8] Zirkelback N, San Andres L. Bulk-Flow Model for the Transition to Turbulence Regime in Annular Pressure Seals[J]. Tribology Transactions, 1996, 39(4): 835-842.
[9] Mihai Arghir, Jean Frene. Static and Dynamic Analysis of Annular Seals[R]. ASME 2006-FEDSM-98565.
[10] Diego Saba, Paola Forte, Giuseppe Vannini. Review and Upgrade of a Bulk flow Model for the Analysis of Honeycomb Gas Seals Based on New High Pressure Experimental Data[J]. Strojniski Vestnik/Journal of Mechanical Engineering, 2014, 60(5): 321-330.
[11] Luis San Andres. Rotordynamic Force Coefficients of Bubbly Mixture Annular Pressure Seals[J]. Journal of Engineering for Gas Turbines and Power, 2012, 134(2):1-8.
[12] Grigory L Arauz, Luis San Andres. Analysis of Two-Phase Flow in Cryogenic Damper Seals-Part I: Model Validation and Predictions[J]. Journal of Tribology, 1998, 120(2): 221-227.
[13] Grigory L Arauz, Luis San Andres. Analysis of Two-Phase Flow in Cryogenic Damper Seals-Part II: Theoretical Model[J]. Journal of Tribology, 1998, 121(2): 228-233.
[14] Jeffrey Moore J, Alan B Palazzolo. CFD Comparison to 3D Laser Anemometer and Rotordynamic Force Measur- ements for Grooved Liquid Annular Seals[J]. Journal of Tribology, 1999, 121(2): 306-314.
[15] Athavale M M, Robert C Hendricks, Bruce M Steinetz. Numerical Simulation of Flow in a Whirling Annular Seal and Comparison with Experiments[R]. NASA 1995-TM-106961.
[16] 高庆, 李军. 涡轮蜂窝面径向轮缘密封封严性能的数值研究[J]. 推进技术, 2016: 37(5). (GAO Qing, LI Jun. Numerical Investigations on Sealing Performance of Turbine Honeycomb Radial Rim Seal[J]. Journal of Propulsion Technology, 2016, 37(5).)
[17] 李钰洁, 刘永葆, 贺星. 间隙变化对新型涡轮密封气动性能影响的数值分析[J]. 推进技术, 2015: 36(8). (LI Yu-jie, LIU Yong-bao, HE Xing. Numerical Simulation for Effects of Clearance Change of a Novel Seal on Aerodynamic Performance of Gas Turbine[J]. Journal of Propulsion Technology, 2015: 36(8).)
[18] Gocha Chochua, Thomas A Soulas. Numerical Modeling of Rotordynamic Coefficients for Deliberately Roughened Stator Gas Annular Seals[J]. Journal of Tribology, 2007, 129(2): 424-429.
[19] Xin Yan, Jun Li, Zhenping Feng. Investigations on the Rotordynamic Characteristics of a Hole-Pattern Seal Using Transient CFD and Periodic Circular Orbit Model[J]. Journal of Vibration and Acoustics, 2011, 133(4).
[20] Patrick J Migliorini, Alexandrina Untaroiu, Houston G Wood, et al. A Computational Fluid Dynamics/Bulk-Flow Hybrid Method for Determining Rotordynamic Coefficients of Annular Gas Seals[J]. Journal of Tribology, 2012, 134(2): 1-9.
[21] Patrick J Migliorini, Alexandrina Untaroiu, William C Witt, et al. Hybrid Analysis of Gas Annular Seals with Energy Equation[J]. Journal of Tribology, 2014, 136(3): 1-9.
[22] Patrick J Migliorini, Alexandrina Untaroiu, Houston G Wood. A Numerical Study on the Influence of Hole Depth on the Static and Dynamic Performance of Hole-Pattern Seals[J]. Journal of Tribology, 2014, 137(1):1-7.
[23] Nelson C C, Nguyen D T. Analysis of Eccentric Annular Incompressible Seals: Part 2—Effects of Eccentricity on Rotordynamic Coefficients[J]. Journal of Tribology, 1988, 110(2): 361-366.
[24] Luis A San Andres. Analysis of Variable Fluid Properties, Turbulent Annular Seals[J]. Journal of Tribology, 1991, 113(4): 694-702.
[25] Mihai Arghir, Jean Frene. A Bulk-Flow Analysis of Static and Dynamic Characteristics of Eccentric Circumferentially-Grooved Liquid Annular Seals[J]. Journal of Tribology, 2004, 126(2): 316-325.
[26] Luis San Andres, Adolfo Delgado. A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically[J]. Journal of Engineering for Gas Turbines and Power, 2012, 134(5): 1-10.
[27] Marquette O R, Childs D W, San Andres L. Eccentricity Effects on the Rotordynamic Coefficients of Plain Annular Seals: Theory Versus Experiment[J]. Journal of Tribology, 1997, 119(3): 443-447.(编辑:史亚红)　　　　　　　　　　　　　　收稿日期:2016-03-08；修订日期:2016-06-22。基金项目:国家自然科学基金(11176010)。作者简介:夏鹏,男,博士生,研究领域为动力机械间隙密封设计和轴系故障诊断。E-mail: chandlergogo@163.com